Having problems with your Tecnik 24 in. TKD795/3 Built-in Dishwasher ?

Tecnik Built In Dishwasher SE6TIE1GB/17

\015 Just moved to a place that has this dishwasher but don't have a manual for it. The previous owners said that the washer worked fine. The water is conected to it and all lights come on when I press the main switch on.\015\012\015\012When I open and then close the door and then press the ON switch, at top left of the door, a red light on the right side shows "END". When I press any of the other switches to the right of this (I assume these are the programme settings as they show 3 different items that can be washed at different temperature) - they light up - but when I close the door the machine does not start. The ex owners are no longer in the UK - so can't ask their help. Any idea how to get the machine going?\015

Answers :

You can try reseting the machine buy holging down outside two cycle buttons for 3 seconds, then release. After a minute the end light should come on. Then use as normal. If this fails pull the unit out, then take of the side panels (screws to the front in the seal) & check the red anti-flood float on the left side of the machine, to make sure it is not up activating the cut out switch. This may be due to the machine leaking somewhere and the float raises and activates the switch, or as in my case a build up of limscale has raised it up enough to activate it.
\015\012
\015\012Hope this helps
Repair Help & Product Troubleshooting for Tecnik 24 in. TKD795/3 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher isnt washing properly - Tecnik 24 in. TKD795/3 Built-in Dishwasher


Hi,Check your heating element.. Dishwasher ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Dishwasher will not drain - Tecnik 24 in. TKD795/3 Built-in Dishwasher


... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Dishwasher not pumping out - Tecnik 24 in. TKD795/3 Built-in Dishwasher


Hi,Here is a tip that I wrote that will help you with your dishwasher ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

S9J1Ti dishwasher doesn't fill up with water - Tecnik TDW2677 Built-in Dishwasher


... Tecnik TDW2677 Built-in Dishwasher

Washing machine and dishwasher no hot water - Tecnik TDW2677 Built-in Dishwasher


... Tecnik TDW2677 Built-in Dishwasher

How to quike wash tecnik s9j1ti - Tecnik 24 in. TKD795/3 Built-in Dishwasher


... Tecnik 24 in. TKD795/3 Built-in Dishwasher

How to reset a tecnik dw 2677/2 - Tecnik TDW2677 Built-in Dishwasher


... Tecnik TDW2677 Built-in Dishwasher

My dishwasher wont work - Tecnik 24 in. TKD795/3 Built-in Dishwasher


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Tecnik tkd 795/4 - Tecnik 24 in. TKD795/3 Built-in Dishwasher


... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Tecnik 24 in. TKD795/3 Built-in Dishwasher running cold


Hi,Check your heating element.. Dishwasher ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Tecnik built in dishwasher


These arms spin based on water pressure generated from the washer itself. \015\012\015\012Run the washer. As soon as the washer is full of water and the wash cycle starts, open the door and verify that you have at least a couple inches of ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Tecnik Built In Dishwasher SE6TIE1GB/17


You can try reseting the machine buy holging down outside two cycle buttons for 3 seconds, then release. After a minute the end light should come on. Then use as normal. If this fails pull the unit out, then take of the side panels (screws to the f ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Door fitting instructions please - Tecnik 18 in. TKD7000 Built-in Dishwasher


... Tecnik 18 in. TKD7000 Built-in Dishwasher

Neff 16p1f integrated door fitting - Tecnik 24 in. TKD795/3 Built-in Dishwasher


... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Fills up takes ages empties but no heat - Tecnik 24 in. TKD795/3 Built-in Dishwasher


... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Dimensions for tecnick TKD795/3 - Tecnik 24 in. TKD795/3 Built-in Dishwasher


... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Tecnik 24 in. TKD795/3 Built-in Dishwasher keeps blowing fuses


... Tecnik 24 in. TKD795/3 Built-in Dishwasher

I have a built in tecnik tkd7000%2F2 dishwasher. The door which the fitter attached was held on by 4 screws which were directly screwed into the wood of the door. After a short time the door fell off. Can you advise whether the door should be held on with some sort of fixing kit? thanks


Some DW have a fixing kit, but doors can also be secured as yours is. You could put slightly longer screws in but please check as you do not want to screw right through the door. If you look around the inner edge of the DW door there are sometimes ot ... Tecnik 18 in. TKD7000 Built-in Dishwasher

Size specifications of a technik TKD 795/3 - Tecnik 24 in. TKD795/3 Built-in Dishwasher


... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Seems to be stuck on a program - Tecnik TDW2677 Built-in Dishwasher


Switch - off power supply at your plug point. Wait for a 2 to 3 minutes and switch ON. Now it should become alright.(if u are stuck in the middle of wash).If problem continues contact authorized service center. ... Tecnik TDW2677 Built-in Dishwasher

I have a Tecnik TKD795/3 built in dishwasher. It is now making a gurgling noise as though it is draining water when I try to start the cycle, but the cycle does not start and no lights come on at all. I have tried pressing the outside two buttons to reset, but absolutely nothing happens and the gurgling noise continues until I release the power button. Can you help please?


... Tecnik 24 in. TKD795/3 Built-in Dishwasher

No power and checked external fuse - Tecnik 18 in. TKD7000 Built-in Dishwasher


... Tecnik 18 in. TKD7000 Built-in Dishwasher

Pump not working - Tecnik 18 in. TKD7000 Built-in Dishwasher


The pump motor is inline with the outlet pipe and can be checked by a)Looking to see if it the motor spins while in the pump out mode. b) Test with AC voltmeter across the 2 terminals for voltage while in pump out mode. \015\012The motor can be ... Tecnik 18 in. TKD7000 Built-in Dishwasher

My built in Tecnik dishwasher is not heating the water so that it in effect does a cold wash that seems to take all night before reaching the end of the program. Have tried reset, to no avail.


You really need to change or check heating element assy.... ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Basics. how to operate... - Tecnik 18 in. TKD7000 Built-in Dishwasher


... Tecnik 18 in. TKD7000 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1835 seconds