Having problems with your Tecnik 24 in. TKD795/3 Built-in Dishwasher ?

Water in salt reservoir

\015 Hey.I have a Tecnik, TKD395 built in dishwasher.I think I need to top up my salt and rinse aid..But when I opened the salt bit, theres water inside, is this normal?Thanks.\015

Answers :

I've had the same dishwasher for 2 years now and always had water in the salt compartment. Don't know if this is normal but disn't seem to be a problem til now. Just fill with salt as if it was empty.
Repair Help & Product Troubleshooting for Tecnik 24 in. TKD795/3 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a DS605 and DD605, F1 fault comes up everytime I try to cut the dishwasher on also water will emerge in it and the impleller floats up under the rack on the top dishwasher. Both dishwasher comes on the same time and make noise and the F1 with a little rench shows up. They said when the red light comes on the salt reservoir is empty. What kind of salt do I put in.Please advise


... Fisher and Paykel DD605HSS 23 in. Built-in Dishwasher

I have a NEFF dishwasher model SD11XT1F about 18 months old. It smells. I've tried all the book solutions but the smell returns after a couple of days. I can get rid of it by mopping out the small amount of residual waterin the sump, so I'm wondering if it's bacteria in the salt solution reservoir. I've run a programme pumping the waste into a washing up bowl. The water from the first two cycles appears greeny-yellow. Is that OK? Can I clean out the salt somehow and start again, or is it a d


HiThe smell usually comes when the unit is unable to drain water completely, you can run your dishwasher at its hottest temperature setting with 1 cup of vinegar inside the unit. After this take off the bottom front panel and clean it com ... Neff Dishwashers

Water in salt reservoir


I've had the same dishwasher for 2 years now and always had water in the salt compartment. Don't know if this is normal but disn't seem to be a problem til now. Just fill with salt as if it was empty. ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Waterside water softener model MC250 Dear Sir, Salt level did not go down during regeneration. I poured 2 pints of warm water to break solidified tablet salt, I found moist salt, but very little water in salt tank. I regenerated. I hear water going down the drain. Please could you tell me which pipe brings water in the salt tank, and what level of water should be visible, How is the water replenished in the salt tank? and how that level is maintained. Would you be kind enough to give me a wate


... Dishwashers

Bosch sgs45 The unit take in water but then tries to pump it out every 10 seconds. Checked the drain pump from above and below by removal - all clear. There is a large clear plasic container which seems to be the salt reservoir. This seems to have food residue in it. Any ideas on the way forward would be appreciated


... Bosch Dishwashers

Hi. Just bought a Blomberg dishwasher & have a question about the water softening feature. What is the appropriate type of salt? The manual says no table salt, no coarst salt. It recommends a highly soluble type salt, fine-grained or powdered. What kind of salt is this? (And, why wouldn't water softening salt pellets work?)


You will find the correct type of salt on the same isle as the detergent in the supermarket.\012\012Regards\012\012Ian ... Dishwashers

Water softener Salt residue remains on the dishes. The water softener is going throught salt like crazy. I fill the salt and make sure that the light is off before I start the cylce. Within the first 20-45 mins the salt light comes on again and the dishes will not wash properly. We have come to the conclusion that the salt is being distributed to quicky but cannot figure out why the light keeps coming on. The switch inside the cap for the salt is set a the min.


Just a thought, I hope the lady did not use table salt :-) ... Danby 17 in. DDW1802W Designer Series Built-in Dishwasher

Leak from salt reservoir on the DT999


Replace water softner seals (Hoover spares reference: 91941698) as stated previously. Harraps were doing them for £6 each. The softner is accessed by removing the R/H panel and unscrewing the air break ring nut from inside the machine. They are ... Hoover 24 in. DT999 Free-Standing Dishwasher

The salt warning light came on (red) and went to put salt in but noticed it was filled with water. I have filled it with salt now and the warning light has gone off but now when I try to select a program it wont. I have drained the water in the salt dispenser but it still wont work! Help!


What is the make and model of the item? ... Dishwashers

We have an Rangemaster RDW459F1 integrated dishwasher and there is a strong taste of salt on everything.We indroduced 2 kg of salt into the dispenser after first filling with water as instructed. We live in a hard water area but even so I turned the arrow more to the - side, but it has not made any difference. It did seem alot of salt to put but it was first time being used. Can you help me please? Jackie


Stop using the tablets. they don't work in hard water areas. I think what you are dealing with is hard water deposits. Use "Lemi shine" for your main wash and the packets for your pre-wash. No one has harder water than where i live... Lemi shine work ... Dishwashers

MY GE WATER SOFTENER QUIT WORKING PROPERLY AFTER 6 MONTHS ,I HAVE HAD SERVICE CALLS AT $150 EACH TO NO AVAIL IT DRAWS SALT BRINE MY WATER HARDNESS IS 17 I HAVE SOFTENER SET TO 22 .I HAVE PRE WATER FILTERS HAVE TRIED DIFFERENT SALTS ALL TO NO AVAIL, NEITHER GE OR HOME DEPOT WANT TO HELP AS NOW I AM OUT OF WARRANTY I HAVE BEEN ILL AND IN THE HOSPITAL (CANCER) THAT'S WHY I HAVE GONE OUT OF THE WARRANTY TIME MODEL GXSF30H PURCHASED 19/02/10


As you have purchased GE water softener and stop working after 6 months,then you need to check it from an expert technician and if he is able to solve this issue,then it good and well, but if this takes more money to repair and not under warranty the ... GE 30000 Grain Water Softener GXSF30H

I have a ge water softening system Model # gxsf27e01. It seems to run through the cycle but the water doesn't become soft. I have checked for a Salt bridge and cleaned out the Nozzle and Venturi assembly. Still no help. The water seems to be building up more and more in the salt holding tank. thanks greg e01


... House Brand Aqua-Pure AP102T Whole House Water Filter System

Miele g892 scu plus, about 5 years old. when on, all it does is run some motor (humming sound) and flash salt or intake/drain. No program lights on. Sometimes can be reset so rinse light comes on and nothing blinks, but humming motor still runs and salt eventually blinks. I removed toekick panel; there is water in pan. I disconnect drain hose, only a little water came out. Any ideas?


... Miele G892SC SS Dishwasher

Whirlpool ADP4502 - lights on but no water running - recurrent falshing red light indicating salt low but insoft water area so never used salt before


... Dishwashers

My dishwasher salt container is filled with water, what should i do to get the water out so I can fill up my salt? and does it mean my machine is broken?


... Bosch Dishwashers

Tablet salt I have a water softener installed - can I use the same water softener salt tablets in my dishwasher?


No, you can't do experiments without prior consultation with a technician cause that will hurt your water softener and you can even lose it from working normally. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Whirlpool ADP 5966 Dishwasher using the complete salt load in 6 washes and coating all the dishes in salt that would not rinse off. I filled the salt and 6 washes later it was requiring a new load of salt. We have had the machine for 5 years no trouble The problem is a complete overload of salt coating everything in the rinse water and drying on during the heated drying cycle. The problem is not caused by the following Cracked of failed seals on the lid to salt compartment N


... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

ASKO D3432 At start up, drain pump works fine to remove water. Inlet valve kicks in and it fills with water, then it shuts off and gives a fault message. "Water Inlet Fault". There are no "kinks" in the water hose and I can see water fill the side "reservoir".


... Asko 24 in. D3432XL Dishwasher

Pump is constantly running - trying to pump out water, although there is no water in the tank. This condition remains the same AT EITHER AND ANY reset positions of buttons ABC or programme buttons. Programme END indicator is NOT lit, LOW SALT indicator lamp is ON, LOW RINSE-AID indicator lamp is ON. No apparent blockages. Supply water water is on and free flow.


Hello, welcome to FixYa.\015\012\015\012Based on your description it sounds like the emergency overfill switch has been actuated.\015\012\015\012Here`s what to do and what to look for. ( unbeknownst to many this is built by B/ ... Neff 24 in. S5543X2 Built-in Dishwasher

Adding salt Hi, I have a Bosch Logixx Maxx freedom performance dishwasher and want to know where to add the salt. There is no screw cap on the floor of dishwasher, as in others. Only a lift up flap, but this seems to be full of water. The 'salt' LED is on. Please help. Thanks


... Bosch 18 in. SRS56L08 Logixx Slim-Line Built-in Dishwasher

Hi, we have a Blanco dishwasher model number BFDW4. The dishwasher has stopped working, it fills with water then stops. We tried cleaning all the filters and we tipped it on it's side on a 45 degree angle to drain the water out of the Overflow reservoir but the machine continues to stop working after filling with water. Please help. Regards. Jayne


Hi,\015\012\015\012Sounds like you may have something jamming the circulation pump from turning. A dishwasher has steps in the cycle to complete before it moves onto the next step. once the unit fills with water it then circulates the wat ... Fisher DS603W / DS603B / DS603I Dishwasher

My zanussi zdf131 has not caused any problems during the last year or so since i purcheased it, but now all the dishes etc come out with a "bloom" of white over everything. I've checked all filters etc, run several cleaning programmes but I've now noticed that the salt level does not seem to be going down. I check it every week & refil but this time the salt has been in the reservoir for several weeks & doesn't seem to have changed - could this cause the problem & if so why is the salt level not


... Zanussi Dishwashers

Where does the salt go in Hotpoint ADW1000KOOWW dishwasher? Can I use salt that says on it water softener salt?


Do not use salt bay a liquid for clean that ... Dishwashers

I have lost my manual for Teka DW640F1 dishwasher and im unsure how to put salt in, as i thought the salt was in the cleaning tablets i use but apparently i have to use salt aswell as i live in hard water area. Also as i no longer have the manual ive forgotten what all the symbols stand for.


... LG 24" Built-In Dishwasher - Black

Hello. My dishwasher has been pretty perfect for four years. When my house water softener ran out of salt, I added rinse aid and salt to the dishwasher for the first time. I subsequently added salt to the softener. Recently [a few weeks later] the glasses have all come out cloudy, something that never happened before. Also, the cutlery has whitish marks on it which are impossible to remove. I would love some help on this. Many thanks, Terry


Try cleaning the machine by adding white vinegar to the wash water (before the water-fill procedure finishes). Put your stained dishes and cutlery in with the wash to remove the hard water deposits. The combination of salt and rinse aid may have help ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0773 seconds