Having problems with your Tecnik 24 in. TKD795/3 Built-in Dishwasher ?

One support leg missing, cant find a replacement online...tried several spare parts sites. Its basically a large black plastic screw for a tecnik TKD 795 integrated dishwasher.


Answers :

Get a peice of 1inch board and put under it to stablize it...it mat take more...
Repair Help & Product Troubleshooting for Tecnik 24 in. TKD795/3 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

One support leg missing, cant find a replacement online...tried several spare parts sites. Its basically a large black plastic screw for a tecnik TKD 795 integrated dishwasher.


Get a peice of 1inch board and put under it to stablize it...it mat take more... ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

I have a Kenmore model 665.15835791 dishwasher. I suspect that some plastic packaging has clogged the pump. I've removed the lower sprayer and the circular plastic cover that is held in place with 8 torx head screws. I'm trying to remove the black circular object with a 1 inch hex counterhold held in place with a screw with a 1/4 inch hex head. I have applied some torque to the screw first CCW and then CW with no results. I'm concerned about turning the head off of the screw. Which is the


... Kenmore Dishwashers

I need to adjust the level because of putting tile under it and there is a large black plastic screw in the bac on the bottom that seems to be a leveling screw but it is stuck and I need to know if in fact that this is the purpose for it because that is what is holdong it up in the back and any suggestions how to lossen it


Penetrating oil then check just above this large plastic nut,is there what they call a "jamb-nut" which locks the height you set the leveling leg at and this secures it,soak it with penetrating oil then loosen the jamb nut if there is one and adjust ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

I have two problems with my GUI1500 dishwasher. The 1st is that when water starts entering the dishwasher I hear a loud hammering/vibrating sound. It's strange, but the sound will stop if I turn on a faucet in the house. The other problem I have is that the soap dispensor will no longer stay closed. The Plastic tab that holds it shut has basically disintegrated. Will this cause the dishes to not come clean? Can this part be replaced? I don't see any visable screws holding it onto the door.


Hi - welcome to FixYa,\015\012\015\012The first problem isn't a fault with the washer, it's a plumbing problem called "water hammer", which is a resonating vibration through your pipes. It's usually caused by a toilet flush valve, but can ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

What is the depth, height and width of Tecnik Dishwasher model TKD 795/3/N, which is integrated and I have to buy a new one


... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Stupid neff semi integrated dishwasher is doin my head in... it's about 10 years old and the wooden panel fell off.... the 2 plastic parts at the top where the screws go into are stuck in the door.. do i take the door itself apart to get them set in right again?????


Hello,W/D here.Almost everything that is attached to the doors is fitted from inside the door panel. You'll need to remove the inner door to get at the parts. The screws are around the inner edges and the top; not all are of the same len ... Dishwashers

Arthur martin asf2656a. The dishwasher was on a 50- deg eco setting and got stuck at 30 mins and will not stop or go further. If I turn off the power it remains stuck. There may be a blockage. How do I get into it? there is a large plastic cover on the base apparently with componenets attached. O see no fixing screws


... Dishwashers

I have a hotpoint HDA2000G00WW built in dishwasher. The dishwasher does not run unless you press the plastic door under the latch area. I have adjusted the latch and that does not resolve the problem. I notice that the top three screws that hold the plastic eschucion are no longer holding as the plastic screw areas have broken on the eschucion. Do I need to replace the eschucion or can it be tightened some other way?


... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

Screw drop Hi I was installing my new LG dishwasher and I droped a screw in the hole in the side panel where you can put a screw to connect to the side of your cabinet. There is a small plastic cover which I removed where you can screw a screw into the cabinet. However the head of my screw was too small and fell in the side panel. I can not get the screw out or see it now although I know it is in the dishwasher. Is there anyway of getting it out or will this cause a problem? Since it is in t


A great retrieving tool for this is a flexible shaft magnet wand. I strongly recommend this tool be placed in everyone's toolbox.\015\012\015\012as far as leaving it there if not found? probably safe from electrical. will years of vibration allow it ... LG 24 in. LD-12BS6 Stainless Steel Free-standing Dishwasher

My dishwasher's top rotating sprayer keeps coming loose. The screw and plastic bearing fall out and I think that it has stripped out the end where it seats into the top of the washer. Any ideas on how to anchor this in? Adhesive? A larger screw? The plastic bearing is Part No. 568 and the screw is Part No. 569. If I replace the conduit arm (Part No. 585), will that give it a new, clean spot to screw in too? How difficult is it to replace this arm?


\012Hi,\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you with the online buying...How to Buy ... Dishwashers

Maytag Dishwasher Model #MDB7600AWB One of four plastic WHEELs mounted by screws to a 10 inch metal bar located on either side of the top rack has broken where the wheel meets the screw shaft. (These wheels run along the guide tracks for the upper rack mounted on the inside of dishwasher.) Please provide me with a part number so I can order a replacement part. Thank you.


Call Maytag with information of the tag on machine ... Maytag Dishwashers

Dishwasher Model Kenmore # 665 16829000 Dishwasher "Quick Rinse" was blinking and no other buttons would work. Received FixYa solution below: "Check out the console assembly. take off the inside cover and the plastic over the electronics, just remove the two screws holding down the circuit board, pull it to the side, then blow plenty of air through the two holes on either side. The holes that you need to blow air into are not on the circuit board, but on the plastic underneath the circuit boar


Hi\015\012If the control board detects that a key is stuck in the depressed position, the dishwasher operation will be suspended and the control will flash the light for that key until the condition corrected. If a key without a light is ... Dishwashers

I have a frig/electrolux gallery series dishwasher: model GLD2445RFC0 serial # TH72896159. On the ceiling of the dishwasher is a gray plastic arm that snap onto a round gray disc that screws into the ceiling. It will not stay connected to the disc eventhough I snap it on with a round white plastic doughnut kind of cap. I have replaced the gray arm in the past because the orig. one fell and melted on the heat ring. This one has : 1546496 1546079 CAV 2 >PP+20TF written


If you go to searspartsdirect.com and type in 154607802 for the part #, I'm pretty sure that's what you are looking for. I broke the exact same part and it's what my husband ordered as a replacement. ... Electrolux Dishwashers

I have a 7 year old Kenmore 24" (mod. 16532201) built-in dishwasher. For the past several months now I have noticed a dark almost greasy film covering the inside of the dishwasher after doing a load of dishes. It can also be found around the soap dispenser door, basically everywhere. I'm wondering if the black rubber around the inside front of the dishwasher is deteriorating. It doesn't appear to be damaged or cracked. I have tried "Finish" dishwashing cleaner several times, but to no avail


There are several items apart from the door seal in the dishwasher that comes in contact with the wash water that circulates inside the dishwasher.\015\012\015\012One will have to eliminate one by one - the most likely cause is the washer ... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

Dishwasher GSD2030F03WWSA735136B Model Series number;Piece fell off inside front panel, making it impossible to turn on dishwasher at all..so I took off front panel screws, opened dishwasher and saw white plastic piece but can't find where it goes but it must have something to do with turning the knob to start dishwasher because the knob won't turn now..so it must attach inside somehow but I can't figure out where it goes...help!!


I think you need to get a new knob, write down the model number and make and take the pieces to your local domestic appliance supplier, there might be something similar in stock. Now I do mean the kind of small supplier that understands this kind of ... Dishwashers

I'm having a problem with a cloudy film on all of the dishes that come out of my new Electrolux dishwasher. Everything is cloudy, and the plastics have turned from black to an ugly gray. Note: THIS WAS NOT A PROBLEM WITH MY ORIGINAL GE PROFILE DISHWASHER. Nothing has changed in hour household except the dishwasher. The detergent is the same, the rinse aid is the same. The ONLY change is the dishwasher, itself. I'm very dissatisfied with it, to be honest with you.


Check the drain system, that means all filters, the pump, and the drain hose. Kinks happen easily. ... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

I'm having a problem with a cloudy film on all of the dishes that come out of my new Electrolux dishwasher. Everything is cloudy, and the plastics have turned from black to an ugly gray.rn Note: THIS WAS NOT A PROBLEM WITH MY ORIGINAL GE PROFILE DISHWASHER. Nothing has changed in hour household except the dishwasher. The detergent is the same, the rinse aid is the same. The ONLY change is the dishwasher, itself. I'm very dissatisfied with it, to be honest with you.


Hi,\012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried in vainto clean the things... \012Bought new spray arms online and installed them inminutes...now the thing works ... Electrolux EWDW6505GS Fully Integrated Dishwasher with 9 Wash Cycles, Nylon Racks, Wave-Touch Contro... 24 in. Built-in Dishwasher

G661 SC My Dishwasher wouldn't take the water, and I had a Technician come by. He opened the right side of the dishwasher and said that I need to replace the  large White Plastic Part that transfers the water from the hose to the inside of the dishwasher. Does anybody know the name of it, or where I can find one for this model?


It's called the water intake. They usually dont give too much trouble. Can you give more info on the symptoms please?\015\012Any lights flashing on the machine? If so which ones?\015\012Is any water at all coming in? or is the machine tot ... Miele 24 in. G656SCi Plus SS Built-in Dishwasher

Hello,I hope you can answer the question below for me. My dishwasher is a Hotpoint model BFI680 - integrated. I want to replace the old interlocking assembly with a new one as the spring has broken and I can not close the dishwasher door. I have trouble removing the old interlocking assembly though. I can not see any screws that keep it into place as with other models. Instead, it looks like that it is "clipped" to the dishwasher door via the two inner side round holes at the bottom. Tried to re


... Hotpoint 23 in. BFI68 Built-in Dishwasher

Black residue My Amana dishwasher leaves a black residue on all dishes. The residue does not adhere to the dishes as much as detergent or food would, and is fairly easy to rinse off in the sink. It originally looks like coffee grounds at the bottom of a cup, but upon closer inspection it appears to be small particles of black rubber or plastic. When I put clean glasses in and just run them through the rinse cycle, the problem is the same. I have repeated this several times with clean glasses and


The black residue is possibly rust from iron pipes. I have an old house with iron pipes and when the washer opened the valve that lets water in from the supply hose it did so suddenly and created a "water hammer" that shook the pipe. The hose suppl ... Amana 24 in. ADB2200AW Built-In Dishwasher

I followed 'Mindcell's' advice on fixing my Kenmore QuietGuard 4 dishwasher, and I managed to clear out all the food particles that have accumulated. I suspect that is probably why the middle spray arm has not been very effective. However, in my repair, as I was screwing in the star screw that holds the cover of the foodscreen (the lower most star screw), I managed to overturn it and break it. Thus, the food screen is only held by a plastic clip, and from what I can gather, pressure from a


Hello Lily - You could use the machine this way, afterall all that could happen is for the cover to come loose and end up in the bottom of the machine.\015\012\015\012That said, why not remove that broken screw with a small pair of vise g ... Kenmore 24 in. 15689 Built-in Dishwasher

Dishwasher Problem... Hey, I'm sorry I can't seem to find this information anywhere else. I'm having a similar problem with my dishwasher (also a kenmore quiet guard) and I wanted to try to clean the filter. I'm not sure how to remove the lower arm of the dishwasher. There is a kind of plastic-screw in the middle of the lower arm, is that what holds it on? I'm afraid to try twisting it because I don't want to break it. How did you get it off of yours? I hope I'm not bothering you! Thank you, Je


You are right. The plastic screw needs to be removed. I have a Quiet Guard 4. My procedure is as follows:\015\0121. Remove baskets. Need to pop off the 'keepers' at the ends of the top slidding shelf supports.\015\0122. Remove bott ... Dishwashers

Black soot on plastic in dishwasher


Seems to be the rubber on the seals melting. I'm trying to replace the rubber gasket on the bottom around the sump.. I can't get the new gasket and assmbly to fit into the pit. Guess it's time for a new washer. ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

I have a Kenmore Elite Dishwasher Model 665.13773K600. It seems to have no power to the touch pad (top) control panel. I have already checked the circuit breaker and the power to the dishwasher. A friend said that it may perhaps be the thermo fuse cut out that needs to be replaced. 1) Is this true? 2) How can I remove the 1" thick control panel touch pad after removing the six screws- it seems to be stuck, and I don't want to break the plastic touchpad.


... Kenmore Dishwashers

I have a GE Model#GSD433OZOOWW dishwasher, I am changing the color from white to black. I have ordered all the parts to do this but the insert for the eschutcheon is no longer available. Is there a safe way to remove the old insert? or should I just paint the plastic black? Thanks in advance


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1887 seconds