Having problems with your Troy-Bilt 020528 Gas Pressure Washer ?

Start troy bilt 2600 psi

\015 Where do u drain oiul from\015

Answers :

Repair Help & Product Troubleshooting for Troy-Bilt 020528 Gas Pressure Washer

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

New Troy-Bilt 3000 psi - Very Hard to Hot Start


When you run the unit and shut if off, release the pressure from the spray wand before trying to restart the engine. This built up pressure will cause it to be very hard to start as you have found out. If it does not start on the second pull release ... Briggs & Stratton Prosumer 20324 Gas Pressure Washer

Troy Bilt 3000 psi Ready Start will start but than turns off after a minute


... Troy-Bilt XP 3000 PSI 2.7 GPM Gas Pressure Washer 020489

Troy-bilt pressure washer 2350 psi wont start after use


... Pressure Washers

Start troy bilt 2600 psi


... Troy-Bilt 020528 Gas Pressure Washer

Start troy bilt 2600 psi


... Troy-Bilt 020528 Gas Pressure Washer

I have a Troy bilt 2700 psi pressure washer and I can't get the pull start to pull all the way. It pulls part way and is stuck. The last time I was running it it shut down on its own and I haven't been able to restart it since. Thanks


... Pressure Washers

Troy-Bilt 2700 PSI 2.3 GPM Gas Pressure Washer will not start


... Karcher Pressure Washers

Motor starts but shuts down immediately - Troy-Bilt XP 3000 PSI 2.7 GPM Gas Pressure Washer 020489


Hi ted6565\015\012Sounds like you have dirt/debris in your caburetor jets,fuel passages or a diaphgram that is becoming non-flexible. Check/Clean/Replace your Air Filter, a dirty air filter can make your engine run to rich with fuel.\015\ ... Troy-Bilt XP 3000 PSI 2.7 GPM Gas Pressure Washer 020489

I have a troy-bilt 2550 psi and just use one time I put oil and gas but now It won't want start the pull cord is hard what i can do


Make sure you hold trigger in to relive pressure when trying to start ... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

Troy Bilt 2600 psi washer starts but has no pressure when pushing trigger. Bought 2009 has Honda motor.


... Karcher G3025OH Pressure Washer

Troy-bilt pressure washer 020296 won't start - Karcher 2500 PSI Pressure Washer


... Karcher 2500 PSI Pressure Washer

Start troy bilt 2600 psi


... Pressure Washers

Troy-Bilt 2550 20293 pressure washer not producing pressure. Worked when last used 2 months ago. Pump pistons are moving up and down when engine is pulled through. Inlet water is flowing through pump but no pressure when engine is started. I have the same problem. Water flows thru the pump when not running, but no flow or goes in by-pass mode when I start the pump. The pump being Troy Bilt Model 020296-01. I replaced unloader valve even. Anything else I can do?


You replaced the unloaded valve. Are you positive you have the unloader screwed to pressure and not turned the opposite way? You will have no pressure if it is adjusted wrong. One other thing I have encountered is that the unloader has a ball bearing ... Pressure Washers

Pull cord stuck Troy bilt 3000 - Troy-Bilt XP 3000 PSI 2.7 GPM Gas Pressure Washer 020489


... Troy-Bilt XP 3000 PSI 2.7 GPM Gas Pressure Washer 020489

Troy bilt pressure washer will not start. I checked continuity between the black wire from the coil and ground and it is showing a dead short which means one of my "fail safe" switches is probably clo


... Troy-Bilt 2700 PSI 2.3 GPM Gas Pressure Washer CARB 020487

Troy-bilt pressure washer 3000 max psi 2.7 gpm not getting gas


The carburetor ports and jets are likely clogged with gum from fuel that contains Ethanol. Avoid using any gasoline that contains Ethanol in small engines. Use only 100% gasoline. You can try the simple method first by adding some Lucas to the gasol ... Briggs & Stratton Pressure Washers

Troy bilt pressure washer 2350 psi wont stay running after use


... Pressure Washers

Troy-Bilt power washer 2500 psi with Honda GCV160, pump does not work


... Pressure Washers

Troy bilt pressure washer 2350 psi wont stay running after use


... Pressure Washers

Troy Bilt 2550 won't start


... Honda Karcher G2400HH-R Pressure Washer

Troy-bilt 2200 psi pressure washer


I have a Troybilt Model 2200 PSI Pressure Washer in which I have used only 2 times in the past 2 1/2 years. Went to use it this past weekend and the pump in not working. Water shoots out of the side. I bought this brand and model as I thought Troyb ... Pressure Washers

Oil for a troy bilt 2550 psi pressure washer pump


What fluid and how much is required in the Troy-Bilt 2550 power washer pump? ... Briggs & Stratton Pressure Washers

Troy built 2350 psi 2.0 gpm. pressure washer. starts onne then dies. will not start again. has briggs and straton motor. has been sitting up for the winter. have changed spark pulg. checked air filter that is clean, has oil and gas.


... Pressure Washers

My Troy Built 2500 psi power washer with Honda engine GCV has been stored for 2 years. I changed the gas and could not get it to start. Which is the start position for the valve on the gas line - Horizontal or Vertical? Thanks, Bill Gray Melbourne Beach FL


... Pressure Washers

What type of oil do a troy-bilt 3000 psi? - Honda Pressure Washer PSI 3000


30 weight ... Honda Pressure Washer PSI 3000
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0986 seconds