Having problems with your Universal Remote Control Powerwasher Universal Pressure Washer Extension Lance withFan Nozzle ?

Lance for unionpower pressure washer parts

\015 Where the lance couples together there is a metal screw type barrel which tightens the two together mine has split in half .Question is where can i obtain a replacement thank you Derek\015

Answers :

Repair Help & Product Troubleshooting for Universal Remote Control Powerwasher Universal Pressure Washer Extension Lance withFan Nozzle

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need a new lance for my pressure washer model KSM i am in caloundra qld need to know anybody in my area who may hold spare parts


... Comet Pressure Washers

I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. Every were I have tried to order, I am told the part is not available anymore. This is a maintenance part in the McCullouh parts manual. I thought parts were available for 10 years, they are still selling this pressure washer;


I need a 7022-140a02 power switch for a McCullouh high pressure washer FH180B. ... McCulloch FH180A Electric Pressure Washer

My Karcher K3.48M pressure washer remains in the low pressure mode even when I return the pressure nozzle to the high pressure position. How can this be corrected. The pump seems to build up the pressure because when I release the handle the pump motor stops. This is a fairly new pump which was purchased in the latter part of last year(2010). Could this have been caused by the detergent I have been using which is an automotive shampoo? Please help I love this washer and for the times that I u


... Karcher PSI Electric Pressure Washer

I have a Pressure problem on my PowerCraft pressure washer. On initial switch-on the machine runs at low pressure. If I then rotate the end of the lance to detergent application mode and then rotate it back to high pressure mode the high pressure kicks in and all is well. Is the lance faulty?


... Pressure Washers

I have a power washer that needs a wand for the high pressure, the low pressure wand is part number PA6630GF. I need the part number and where tp urchase the high pressure wand.


... McCulloch FHH18A Electric Pressure Washer

I have a Husky gasoline pressure washer. The honda motor starts but stalls because the pressure by-pass (not the right term) doesn't seem to open and builds up pressure. I haven't tried to remove any parts yet. I think grit has got in but don't know for sure. The pump looks pretty simple and the part I want to remove for cleaning looks like a plastic hexagon nob. Will this access the by-pass or is it something else.


I think you're right about the knob, but try this:Open the water to the washer. Leave the line open, and hold the trigger down to get all of the air out of the supply and discharge lines. While still holding the trigger down on the spray gun, ... Pressure Washers

Where would I find availability of parts in QLD Australia to suit a pressure cleaner 3200 psi coupled to a Briggs & Stratton motor pressure washer number 020225-0 part required chemical injection kit FIG E on general assembly part number 192914GS


Wayne, Any Pressure Washer dealer should be able to sell you what is called a "Down Stream Injector". What you need to know is the flow rate. Like, at low pressure, see how many Gallons/Liters Per Minute actually comes out the wand. That i ... Briggs & Stratton Pressure Washers

I have a Craftsman pressure washer model 580.752020. I ordered a pressure hose according to the manuals parts list (203961GS) but does not match the original hose I removed from the washer. A hose #31


... Craftsman Pressure Washers

Parts list for exvrb2321 pressure washer - Pressure Washers


... Pressure Washers

SCORPION 2200 PRESSURE WASHER PARTS - Karcher Pressure Washers


... Karcher Pressure Washers

Parts diagram for ProForce pressure washer - ProForce Gas Pressure Washer: 2000 psi 1.5 GPM PWF0102000.03


... ProForce Gas Pressure Washer: 2000 psi 1.5 GPM PWF0102000.03

Spare parts for kew pressure washers - Pressure Washers


... Pressure Washers

Calgary, AB - McCulloch Pressure Washer FH180B casing is cracked, where can I find the parts and how much to replace it, or should I purchse a new pressure washer.


... McCulloch FH180A Electric Pressure Washer

Just need a part number, I have a CA-2003-HDHB pressure washer and I need the part number for the valve kit. also if you could direct me to where I might find a parts breakdown online for my machine, in case I need more part numbers. Thank you. Joe G.


... Mi T M Pressure Washers

I have a karcher 4.6 pressure washer that developed the usual fault.... drop in pressure and leaking from the cylinder head. I have replaced the cylinder head and the attached control chamber. The pressure is now good again and the leak is fixed. Unfortunately now when the trigger on the lance is released the the machine does not switch off automatically. I have bled the machine by letting water run through it


... Karcher Pressure Washers

We have a Karcher G2500VH pressure washer. If you start the engine with the trigger pulled on the spray wand it will run at full pressure until you release the trigger. after that, when you pull the trigger it will not have any more pressure than the water hose feeding it. Does it have an internal unloader valve? What is the part number?


Hi, Karcher calls the unloader valve a spill valve, this is a link to a full drawing/parts listing , and your fault description might well be a sticking /seized unloader(spill ) valve hope this helps ... Karcher 2500 PSI Pressure Washer

North Star Pressure washer Model 157370C Coupler Part broken between engine and garden hose. Need new part with all the interfaces. Where can I purchase and what are the part numbers? Thanks **** McGuire ****[email protected]


... Pressure Washers

The Nilfisk Alto150 washer roof cleaning lance didn't move the moss even with additive. The standard lance does and cleans the tiles to a lovely biscuit colour as when new in 1951. How can I boost the pressure in the extending roof lance to do this so that I don't have to clamber all over our (bungalow) roof


... Electric Eyeware Electric Pressure Washer 1500psi Etq2000psihr

Campbell Hausfield Pressure washer model 1549. After a few years of storage, I cannot prevent the powerful spray leaking from the connection between the Gun and the Lance. I replaced the O-Ring, and tried other means unsuccessfully. Spray from the joint is almost as powerful as spray from the lance nozzle. The Briggs and Stratton engine has been cleaned and operates well. The pump operates well. But the lance connection refuses to seal.


Hello,Most likely, the housing has split and seal is not being made. There is a chance that the hose is leaking where the fitting is crimped on (my experience, but different pressure washer). Are you able to see a leak when turned off b ... Campbell Hausfeld Pressure Washers

I have a model 157818E Pressure Washer. Ineed a cap and other parts but I can not find a parts picture to see the parts. Can you help me?


Hi. this is the source I use http://www.pressure-washer-parts.com/\015\012\015\012Joe ... Northstar Pressure Washer 3000 PSI

No pressure McCullough pressure washer has no pressure after siting all winter. I took apart the assembly and the oil leaked out, also I noticed yhe o-ring that seals the two pieces together seems to have been blown out. Where can I get parts and oil. Thanks for any advice.


... McCulloch FH140A Electric Pressure Washer

Karcher pressure washer lack of pressure and intermittent noise, when not using the lance, as if pump switches off. When using the machine (K3.99M) it works but lacks pressure.


This sounds like an internal crack in the outlet head, simple to replace and not that dear ... Karcher K2.26 Electric Power Washer

Pressure washer snow foam lance


... Pressure Washers

Honda pressure washer cuts out when lance trigger released.


When you release the trigger the pressure inside the pump rises above\015\012working pressure. Once it reaches a set control pressure (around 20%\015\012higher than working pressure) a sprung loaded piston actuates a switch\015\012thus stopping the m ... Karcher 2500 PSI Pressure Washer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0976 seconds