Having problems with your Viking 24 in. Professional Series DFUD140 (Premium) Built-in Dishwasher ?

Motor keeps running and we can't operate the dishwasher


Answers :

Look for water accumulating under the dishwasher. It has a tray that will catch any leaking water before it gets to your floor. If this is the case the most likely cause for the leak is the drain hose (located behind the main pump housing).
Repair Help & Product Troubleshooting for Viking 24 in. Professional Series DFUD140 (Premium) Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Motor keeps running and we can't operate the dishwasher


Look for water accumulating under the dishwasher. It has a tray that will catch any leaking water before it gets to your floor. If this is the case the most likely cause for the leak is the drain hose (located behind the main pump housing). ... Viking 24 in. Professional Series DFUD140 (Premium) Built-in Dishwasher

Motor keeps running; dishwasher won't fill. Noticed some leaking out of the bottom. Even when dishwasher is off, the motor runs.


1)problem in the board(relay) ... Dishwashers

I have a smeg dishwasher model PL 312 S and the timer seems to operate but now water enters or any motor functions. The on light is lit and the timer motor runs and that is all that seems to be operational.


... Smeg Dishwashers

Bosch dishwasher motor keeps running no water


Hola Lewis!This is such an easy repair, you'll be shocked and surprised! The reason this is happening is that the computer or timer has detected a "flood" condition and has permanently energized the drain pump to clear the "flood". ... Bosch Dishwashers

Bosch Dishwasher . The pump keeps running and will not stop. The hoses have been cleaned and there is no flooding of any sort. The machine takes in water runs for a while the expels water and continues to run pump out motor.


... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

The eco light is flashing constantly on my Dishlex Global 300 dishwasher, it is making a noise like a pump is running continously, but the unit will not operate. Can you give me some possible faults and solutions. Regards Dave I have the same problem. The Eco light flashes and there is some sort of noise, not sure if it is a pump or a solenoid, but thats as far as it goes. A friend gave me the machine after aservice tech told him the main washer motor was gone. i have fitted a new motor, but


Its an overflow of water into the base of the machine.There is a float switch in the base of the machine in a small plastic dish.There is a metal cover with 2 small bolts that have to be removed to get to it.get the overflow c ... Dishwashers

Hey guys, I am a dishwasher repair guy in barbados, the caribbean. I am having problems with a Hobart LX30H. the relay board is doing half the things right and the othrs not at all. I replaced it with a new one and the same results. At startup, the wash sump heater and wash motor are running, but the fill valve, drain valve and rinse booster are not running. Hence the startup operation is stalled. the funny thing is that the rinse booster and fill valve led's on the relay board light up at


Not sure what sort of problems (fault codes etc) you were having before you chose to go on the path of replacing the relay board.\015\012\015\012It might help to know what fault codes you have been noticing.\015\012\015\012One ... Dishwashers

When I press the start button, Bosch dishwasher (model SHY56A 05UC) just keep running the motor pumping the water out of dishwasher, irrespective of: 1) the wash cycle it is on, 2) whether the door is closed or open, 3) whether I cancel drain cycle, as told by Bosch Cust Svc in following steps: - "Cancel Drain" by pressing 'Quick Wash' and 'Regular Wash' buttons together for a minute until it shows 0* - Shut power off for a minute and wait for a minute - Restart on Quick Cycle. Paid


What is happenig i believe and has happened to me 2 times is that the water level float that is on the left side of dishwasher is stuck.\015\012\015\012Either remove side panel and flick lever or pull dishwasher out and tap lower portion ... Bosch SHY56A02 / SHY56A06 Built-in Dishwasher

Dishwasher keeps running I have a Bosche dishwasher and the water keeps running. As long as we run it and don't stop it, the pump will continue to drain about every 3 minutes. The water just keeps running though. If we open it to empty the dishes, the cycle will stop. But the water keeps running, filling the tub, and then overflows, flooding the kitchen and drains through our wood floors to the basement below. Our ASKO seems to have a similar problem. I started the dishwasher, and the water ke


Open up the door, get out the control unit. Pry open the unit's plastic case and look at the board. Burnt spot? If so, the heater circuit burnt out (happens a lot on Bosches) and the control is waiting for the water temp to rise, but of course it ... Bosch SHU43C05 Stainless Steel Built-in Dishwasher

Dishwasher drain motor keeps running


... Dishwashers

Bosch shy66c drain motor keeps running after wash cycle is complete, can't reset using control panel or circuit breaker , pull dishwasher out and tilt it 45 degrees, there is same water on the flo


... Bosch 24 in. SHY66C05 Stainless Steel Built-in Dishwasher

Bosch built in dishwasher shu4302uc The dishwasher appears to run through the cycle but the cycle keeps running. I have checked the screens and they were clear. I have a Bosch Dishwasher SHU4302UC and I can't figure out how to cancel the cycle it's in. It keeps running and running. It pumped all the water out and the LED indicator are lit for the rinse/dry.


There is a recall on the control board of many of these models. I have written a guide to help. It is here. Look for the phone number near ... Bosch 24 in. SHU43 Built-in Dishwasher

The same problem as everyone else with the motor continuous running, but it keeps happening about every 5 months. Know I have done the normal procedure it is making a fairly loud noise while running.


... Asko 24 in. D3112 Free-Standing Dishwasher

GE Mod # GSD22360Z04WW will not drain water. I manually pushed the solenoid down and the pump and motor seemed to run. No water pumped out of the hose that was disconnected from the garbage disposer. I have discovered that the plug for the disposer was not taken out where the dishwasher hose attached. The dish washer stopped working after a new disposer was installed. I rotated the control knob and at no time did the solenoid for the pump operate. It went back to normal position after control kn


... Dishwashers

GLDT696TSS dishwasher water does not fully drain and drain motor keeps running


... GE GLDT696TSS Builtin Dishwasher

Brand new GLDT696TSS dishwasher water does not fully drain and drain motor keeps running.


... GE GLDT696TSS Builtin Dishwasher

The "clean" light keeps flashing, but dishwasher will not start to fill and operate. When I push the cancel-drain there is a motor sound as if it is doing something, but there is still no response if I try to push "normal wash". Linda Watters


The blinking clean light is an interruption in the dishwasher program that usually indicates a component malfunction. It can also be a result of a momentary program glitch as well. If a component is defective, it's most commonly attributed to a heat ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

I have an ASko dishwasher and some motor keeps running and I cann


... Asko 24 in. D3250 Built-in Dishwasher

Hi there. i have a hoover hd72 m dishwasher and until recently it has been fine. now tho,when running the machine it just seems to keep on filling up with water and consequently leaks from the bottom of the door. i can drain it manually by twisting round the programmer.any ideas guys. any help would be much appreciated. xmas is coming!! cant rtelly afford a new one yet. thanks


... Hoover 24 in. HD72M Free-standing Dishwasher

Bosch dishwasher I am looking for a wire diagram for a Bosch dish washer mod # SMU2046UC SER# ? FD 7609 470358 my problem is the timer will run but there is no operation at any point on the timer dial, and I cant find a wireing diagram for this unit. so that I can try to trouble shoot this problem.


... Dishwashers

Have a GLD6500L00CC dishwasher. after the completion of any cycle there is a lot of water standing in bottom.It is understood that there should be a little water to keep the seal lubricated but the level is as high as the brackets supporting the heating element. The manual refers to running the discharge hose high referring to the installation instructions. The installer did not leave any install instructions only the Operating manual. There is no air gap installed. Where do you go to get a pa


The drain line may be partially clogged. You will find manuals here:http://www.geappliances.com/ ... GE Dishwashers

Dishwasher will not empty the motor just keeps running even if I turn it off.


... Zanussi 21 in. DCE5655 Free-standing Dishwasher

The breaker keeps shutting off when I run my dishwasher. Service already changed the intake hose. Is it the motor?


Rarely. next time this happens. immediatly go to the breaker box, and feel for heat on the breaker that is blown. if it is warm, your miele is okay, call an electrician. ... Miele 23 in. Novotronic G841 Built-In Dishwasher

My neff S5443X2 dishwasher pump keeps running - in addition, the operating lights on the top of the door do not illuminate. I checked the bottom tray and float switch but it was dry and the float switch seems to be down


When this happens usually it is a sensor.and/or the main unit Brain. One needs to troubleshoot to tell, as many, most? symptoms seem similar but have differing sources. One needs to troubleshoot.\015\012\015\012To have any chance at DIY repair ... Neff 24 in. S5443X2 Built-in Dishwasher

Hi have an industrial Jackson Warewashing dishwasher, AVENGERHT, serial#086239693 - the problems listed are: - does not wash well, - we find food on the plates after the wash - does not dry, - keeps on running - is rusted all over - when , where and how to replace the detergent (we do not know if there is any in it) - we do not know how to operate it (even after reading the manual) I'm not sure if there is anything wrong with it, except for the rust- it could be a matter of ope


... Jackson AVENGERHT 24 in Builtin Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2208 seconds