Having problems with your Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher ?

Plumber installed new garbage disposal without removing plug. Dishwasher ran all night without draining. I removed plug and it drained but now the dishwasher doesn't have water coming out of sprays. Is the motor burned out?


Answers :

Spray's are most likely clogged with food debris,carefully use a small nail or similar object to clean them out.
Repair Help & Product Troubleshooting for Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Plumber installed new garbage disposal without removing plug. Dishwasher ran all night without draining. I removed plug and it drained but now the dishwasher doesn't have water coming out of sprays. Is the motor burned out?


Spray's are most likely clogged with food debris,carefully use a small nail or similar object to clean them out. ... Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher

My dishwasher doesnt seem to turn on to a cleaning cycle. barely any water is in there and it smells like it is burning sometimes. my water is on to the dishwasher. also water comes out of the valve in the sink.


Check your disposal. If newly installed the knock out plug was not removed. The smell could be food decaying. No water should be coming out of the vent on the sink.\012\012Remove the rubber pipe from the dishwasher to the disposal. ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

FDW60 dishwasher - taken apart pump and that is clear. Seems that dishwasher fills, and empties and heats all OK but water wont go around the machine ie the motor pump doesnt start - any idea how to take this out and replace without having engineer around? Taken small pump apart and its clear. First of all the Eco and fast light flashed, then we took it apart with some direction from online discussion advice. Now Eco and Pre wash lights are flashing. Machine empties water, then fills with


... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Model #FDB1100RHCO Dishwasher fills up and drains but nothing comes through the jetts. Could the motor be burned up allready its only 2 years old>


... Frigidaire Dishwashers

I would like to know how old this dishwasher is? Mod HDA2000Z05WH and serial is SV826876Y. Would the wheels coming off bottom rack cause the motor to burn up causing washer to not work. There is a hard cap over something in the left corner on the bottom . Imwould like to know what is under that cap?


... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

Water pump in dishwasher then pump out without washing dishes can not hear main motor come on


Check the tub float ... Asko Dishwashers

Amana dishwasher making loud noise when running. nothing stuck, sounds like it is coming from the motor. still wahses dishes, no burning smell.


... Amana Dishwashers

I have a GE dishwasher model GLDL560N10SS. I noticed a burning smell coming from it the other day and then realized that although I can hear water running into the dishwasher when I start it, it never actually runs in the sense that the water is pushed through the various outlets to wash the dishes. I'm assuming that it is because the unit is dry and the heating element is still coming on that it is causing a burning smell. If I open the unit and reset it, it pumps the water back out into the si


The problem sounds like it is in the water inlet selonoid. Pull off the bottom panel and this is the part that the main water line hooks to there is a selonoid and it has a plugg inconnection to it unplugg it and check for power when the unit is supp ... Dishwashers

I was told by a repairman that the seals around the motor swelled because I had gone on vacation for two weeks and not used the dishwasher. He charged $85 to turn the motor manually and restart the dishwasher. The dishwasher is 5 years old. Does this mean I can never leave for two weeks at a time and come home to a working dishwasher?


No. The unit most likely had some debris stuck in the macerator. The seals are water lubricated and its possible that some detergent dried between the seals. Detergent is a lot like glue when it dries. You are probably using the factory recommend ... GE Dishwashers

Burning odor coming from dishwasher and leaking in the basement. Help!


... GE Nautilus 24" Built-in Dishwasher

My Whirlpool Dishwasher ADP931 has stopped working. It stopped in the middle of the cycle with 2 to 3 inches of water on the floor of the compartment. I mopped out the water and tried to restart the dishwasher. The green "on" light now comes on when I press the start button. but nothing happens (no motor comes on,no water enters).Repeating the above action several times does not help the washer to restart even though the other function lights will come on when the knob is turned. saturn1914


Hi,Whenever you see such symptoms, Time for you to investigate it properly. Check the below guide :-\015\012\015\012\015\012\015\012\015\012Power from the house\015\012\015\012Is\015\012there power getting to the dishwa ... Dishwashers

Westinghouse undercounter dishwasher. after shutting door with latch, comes on when dial knob turned to selected wash. was taken out to redo floor underneath. after being placed back in position, did at least 2 loads fine. now after dial knob gets to selected wash, dishwasher light comes on and i can hear the motor try but then starts clicking. there is also water at the bottom inside the dishwasher


This seems to be a drainage problem, obviously. There may be some food debris in the drain tube where it connects to the drain pipe. It would be easy to detach and do a visual check, and see if you can clear the clog. Also, try to s ... Dishwashers

I have a GE potscrubber Dishwasher Model # GSD3630ZZ3WW it has been leaking from the bottom for about a week. I took the bottom off tonight and ran the dishwasher so that I could see where it is leaking from. It is not a hose but the leak seems to be coming from the back of the motor or pump fan where it goes into that plastic housing that attaches to the bottom of the dishwasher seems to be leaking in the very center of that housing where the motor shaft enters the housing. Water is just spray


... Dishwashers

I have a Whirlpool dishwasher (model DU890SWKQO). I turned it on and for a few minutes only the motor was running, no water. I opened the dishwasher to stop it and turn it off, then on again. When I opened it, the was an odor (burning or heat smell) and it was foggy (steam or smoke, not sure which) inside. I am assuming I did not turn the dial correctly so it only 'clicked' on the motor. Concerned now that the dishwasher is broken or concerned that it's not safe to use. Was the steam/smoke


... Dishwashers

Dishwasher confused Dishwasher was switched off just after cycle commenced (tablet had been released). On restarting dishwasher, it wouldn't take in water and has just been going through the motions of the cycle without anything happening. Even when the power button on the machine is switched off or the door is opened, the motor continues to run but without water. Water is definitely switched on under sink. I think the computer is confused - can you please help?


I suspect this is nothing to do with switching off during the cycle.take the bottom plate off and check if there is water leaked into the bottom pan. alternatively, if you can, tilt the machine back to 45deg and see if water runs out.most ... Dishwashers

Cranky dishwasher I have to admit my wife's solution is the only one that works. Our ten-year-old Superba built-in usually starts a normal cycle part-way through, at the wash part, without filling or opening the dispenser door. Therefore the dishes come out with the soil now baked on. Closing the door, selecting normal and start results in a pump-out sound, or at least just the pump running to wash the dishes. The dishwasher ignores any cancel button push,and the light does not come on over t


You want to make sure that the dishwasher is level and secure first of all. Then I would look into the door latch assy. Sounds to me that you are not making all the latch switches when closing normally. When you are slamming it, you are making the s ... KitchenAid KUDS24SE Built-in Dishwasher

Asko 1375 unit will not wash drains and fills ok  motor at back of unit runs well. Suspect impeller   Does motor have to come off for impeller replacement?? My 1375 is leaking a bit, looks like the seal which was mentioned in the impeller repair case,may be the problem? The other problem I noted was a clogged screen at the bottom of the dishwasher which is on the suction side of the pump, the screen had calcium buildup etc. I cleaned it off with vinigar and reran the dishwasher seemed ot fix th


Do you mean to say that the washer does not go into the wash cycle at all, or washes poorly?An answer to both can be found HERE.This article ... Asko 1375 Dishwasher

Have a Kenmore Elite Dishwasher (66513123K701). Was not cleaning dishes very well so we ran diagnostics on it and found a problem with the diverter motor (W10155344) so we replaced it. Now, the dishwasher is leaking from the diverter. There was a o-ring from the original diverter that we had to keep since the new motor did not come with it. Wondering if we should get a new o-ring/seal, but I cannot find mention of such a part anywhere. Is there a certain way to seat the o-ring? Is it ok to


I have experienced the same diverter motor leaking problems. I have the whirlpool gold with the diverter motor (w10155344). I bought the unit new 4 years ago. The fix is remove the the two screws that hold the diverter motor and pull the motor. ... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

I have a Kenmore dishwasher Model # 665.1376 which has always been a quiet unit. This dishwasher is about 4 years old. Now the dishes still come clean, however the cycles have a loud hum to each except for the dry cycle. Could this be a bearing in the motor, and if so how expensive is a new motor?


... Kenmore 13763 Stainless Steel Dishwasher

My KitchenAid KUDI01FL dishwasher will not start. When I run the self test all of the LED lights come on and stay on indefinitey without blinking until I press cancel. Then the cancel light comes on without blinking. What does this mean? Thanks!


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Motor problems? I have a fisher paykel DS6031SS -top drawer dishwasher that the motor makes a loud sound when cycle first starts. Sound seems to be coming from the front of the dishwasher. It is 7 years old. Anyone else have this problem? I llive in a small town in Washington state (Lacey) and have been told the closest place to get parts is Seattle! Thanks.


... Fisher and Paykel DS603SS Stainless Steel Built-in Dishwasher

I have no enr number on my Bosch dishwasher just Maxx Classixx. Motor continues to run after programme finnished and comes on as soon as select programme before turning on. Only way to solve is to tip water out of dishwasher each time by tilting back until it comes out.


... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Leaking dishwasher My GE dishwasher leaks when running a load of dishes. The leak seems to be coming from about the middle of the tub about halfway back. I can't see exactly where it's coming from, but it appears to be dripping right behind the motor. Could it be a poor connection? I would appreciate any suggestions. Thanks, Bob Engle I do not seem to be able to find the model number


Probably a leak at the motor seal where it enters the tub. Best to remove the motor if you can and inspect the seal. ... Dishwashers

Dishwasher problem hi i have a dd605ss dishwasher and the f1 keeps coming up on both drawers at the same time wen i knock them the fi comes back on after a minute with the motor going at the same time


F1 is indeed the flood sensor activation code but coupled with the motor turning on on its own volition it is more than likely one or both of your(motherboards) also known as controllers have cr#pped out.I would buy a new one and then (after 1st t ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Whirlpool Dishwasher detergent door not operating properly. Main wash door opens immediately after starting dishwasher. No pre wash cycle. Loud humming noise coming from bi-metal switch or wax motor attached to the detergent cup assembly. I just replaced detergent cup assembly including the wax motor and I still get a loud vibrating humm from the actuator. model number du1055xtp3


Pdemaio,ngafm at your serviceI believe the loud humming you describe is an electronic problem. And is not worth changing parts randomly and spending unnecessary funds in this fashion!my advice is a hands on experi ... Whirlpool Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2041 seconds