Having problems with your Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher ?

Who can provide repair service for my viking dishwasher near 64056 zip code?


Answers :

That model was producedby asko. Which is now owned by sub zero - wolf. Suggest to get parts direct from mfr as it is more cost effective. Hope this further helps
100 miles of 64056\012\012\012\012\012\012\012Viking Authorized Repair Center - Major Appliances\012\012\012FACTORY DIRECT APPLIANCE
\011\011\011\011\0113401 NE RALPH POWELL RD
LEES SUMMIT MO 64064\011\011\011\011\011
816-246-1018\011\011\011\011\011\012\011\011\011\011\0119.84 miles\011\011\011\011\011\012\012AROUND THE HOUSE SERVICE CENTER, INC
\011\011\011\011\0118024 CONSER ST
OVERLAND PARK KS 66204\011\011\011\011\011
913-341-3322\011\011\011\011\011\012\011\011\011\011\01119.55 miles\011\011\011\011\011\012\012TURNERS CONSUMER SERVICE, INC
\011\011\011\011\01111418 W 89TH ST
OVERLAND PARK KS 66214\011\011\011\011\011
913-541-0438\011\011\011\011\011\012\011\011\011\011\01122.15 miles\011\011\011\011\011\012\012APPLIANCE PLUS
\011\011\011\011\011P O BOX 901237
KANSAS CITY MO 64190\011\011\011\011\011
816-668-8605\011\011\011\011\011\012\011\011\011\011\01123.54 miles\011\011\011\011\011\012\012FACTORY DIRECT APPLIANCE
\011\011\011\011\0111145 SW WANAMAKER RD
TOPEKA KS 66604\011\011\011\011\011
785-272-8800\011\011\011\011\011\012\011\011\011\011\01175.74 miles
Repair Help & Product Troubleshooting for Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Who can provide repair service for my viking dishwasher near 64056 zip code?


That model was producedby asko. Which is now owned by sub zero - wolf. Suggest to get parts direct from mfr as it is more cost effective. Hope this further helps ... Viking 24 in. Professional Series VUD040 Stainless Steel (Premium) Built-in Dishwasher

Need the wiring diagram for the front panel/door of the dishwasher. The wiring diagram in the owners manual does not provide adequate description of which wires connect where. My problem is that, in taking off the door, two wires became disconnected and I cannot tell where they should be reconnected. I called Viking and they are unwilling to provide this (they prefer I call an authorized repair person). Does anyone know whether a repair manual exists for this and where I might get ahold of one.


This is all I could find go to this address www.specsserver.com/CACHE/FILE5412.PDF at the very end is wiring diagram but its not in detail ... Viking DFUD042 Built-in Dishwasher

Our LG 6810 dishwasher has stopped cleaning. After the cycle the dishes are wet and covered in greasy clumps. We ran the test cycle and got the following: 3H/U3 11 22 33 44 55 66 04-2 32 33 0 (inlet valve) 35 36 37 38 23 (Thermistor) 3A 3A (beeped twice and showed 3A) 3A (beeped twice and showed 3A) Any advice you could give me would be appreciated. I have the service manual but have never done any type of dishwasher repair. I'd like to not have to replace this dis


1.) Take racks out of unit.2.) put both of the spray arms in the 12 o'clock position3.) Run the washer,once the washer has started wash cycle,open the door and ensure the spray arms have moved off of the 12 o'clock position. Write down re ... LG LDF6810 Built-in Dishwasher

Looking for a company that repairs Honda pressure washers near zip code 30308 Midtown Atlanta.


We always got our power washing equipment repaired at the lawn mower repair shopTry searching: Small engine repair Atlanta or Lawn mower repair Atlanta ... Honda Pressure Washers

Danby Dishwasher DDW1806BSL Dishes weren't getting clean for awhile. Now, we get an E3 error code and it won't continue through the cycle. There are no repair services in our area for Danby. Help!


Fault Codes E3: Longer heating time, but required temp not met. Possible Causes: Malfunction of temp sensor or heating element. ... Danby DDW1806BSL Stainless Steel Built-in Dishwasher

Bosh dishwasher service codes?


... Dishwashers

Hello ... We have a GE Quiet Power 3 Dishwasher -- only two years old. Dishwasher won't start ...and we are getting an 1h code. What is a 1h code? The manual does not provide any code information. Thank you!


Hello,Try unplugging the unit for several minutes if that does not fix the issue you will need to replace the main control board to fix the issue, let me know, ... Dishwashers

ONCE AGAIN MY DISHWASHER IS DONE DO NOT WANT TO CALL A SERVICE TECH AGAIN HOW DO I RESET THE DISHWASHER FRONT PANEL TO GET RID OF ERROR CODES SERVICE TECH DID IT AND I WAS NOT WATCHING


... Samsung DMT300RFW Builtin Dishwasher

I have a component in the bottom front part of the Miele G542 dishwasher that is leaking water. Its connected to the water IN line. Plumber came out, showed me that I need a dishwasher repair guy to replace the part. Who can I get to make a service call and repair this in San Jose CA.


\015\012Advantage Appliance Repair\015\012\015\012(408) 266-9560\015\012Highly recommended. ... Miele Dishwashers

Leaking Dishwasher seems to be leaking. Otherwise it's performing fine. I have laminate floors, and there are water seeping out along the seams of the flooring area near the dishwasher. The dishwasher is captured by the floor (dishwasher was installed first then floor was put in at 1/2" higher level), so we can't pull it out to check where the leak is coming from. Can dishwasher be repaired from the inside w/out removing it from where it is? Only way to pull it out seem to be cutting a part of


This is a huge problem for you. when you have a leak coming from the bottom of the dishwasher the machine will have to come out. but first check the door gasket to make sure the leak is not coming from there. ... Jenn-Air 24 in. JDB4950 Built-in Dishwasher

I have a whirlpool dishwasher Quiet Partner IV. Every 3/4 months I have to reset it because it will not turn on and perform a wash cycle. The appliance repair people only reset it and charge me $40.00 and do not give me the code. I found the code on the internet but now that code is not working ''High Temp, Air Dry, Air Dry, High Temp, Air Dry, Air Dry.'' Any other suggestions?


... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

MDB6709AWW1 Poor Quality Control Panel Our dish washer is 2 years old this month and the control panel broke!!! My service technician told me that he has seen DOZENS of new Maytag dishwasher control service panels break and is convinced it is a design flaw. When I called Maytag the customer service rep had the NERVE to tell me "that because the house is near the beach, I must get a lot of power outages and power surges, that is why the control panel broke." I told her I wasn't born yesterday


... Maytag Dishwashers

I have Whirlpool Quiet Partner III dishwasher, Model number GU2400XTPS3, Serial number FS1820245. I recently had the thermal fuse replaced by an authorized service repair person. My problem is that the dishwasher stops mid-cycle. I noticed that when I try to clean it in the normal cycle, the dishwasher stops with about 46 or 47 minutes remaining, and the green light flashes continuously. I have pressed the Normal and Heated Dry buttons, as well as the Sani Dry and HEated dry buttons to res


... Whirlpool 24 in. ADG7540 Built-in Dishwasher

I bought a Frigidaire Dishwasher on November 2006. Model #PLD4375RFCO. (I paid K&N Sales $549.00) In October 2008 I called your toll free Number to report Er code was flashing. You recommended Best Service. I called them and the repairman said the"vent was not closing - fault on Drying fan - vent is closed. Sensor bad on assembly." I needed a new drying fan assembly (for $148). With his service fee and labor after he returned to put in the new assembly, the total paid to Best service was $318.25


... Dishwashers

I have Whirlpool Quiet Partner III dishwasher, Model number GU2400XTPS3, Serial number FS1820245. I recently had the thermal fuse replaced by an authorized service repair person. My problem is that the dishwasher stops mid-cycle. I noticed that when I try to clean it in the normal cycle, the dishwasher stops with about 46 or 47 minutes remaining, and the green light flashes continuously. I have pressed the Normal and Heated Dry buttons, as well as the Sani Dry and HEated dry buttons to reset the


... Whirlpool GU2400XTP Built-in Dishwasher

My Whirlpool wdf530payw dishwasher is not draining. I ran the service diagnostics using the control panel, and the code that came back was Function code 8, and Error code 2 "Drain Motor Electrical Problem". The possible causes listed are: a. Loose Connection in drain motor circuit, and/or open drain motor winding. b. Open Fuse on control to drain motor c. Faulty drain motor drive circuit on the control When I hit the "Cancel/Drain" button there's an faint buzzing sound for about 2 minut


... Whirlpool Dishwasher. Front Control Dishwasher in White WDF530PAYW

Hotpoint could we possible have a copy of the error codes and flashing lights codes for the hotpoint / indesit washing machines and dishwashers please? thank you Paula Jay PETER JAY SERVICES LTD [email protected]


Hope this helps u... all the error codes and faults, they can be found here>>>>>>> http://www.hotpointservice.co. ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Our school uses a UH-150B dishwasher. Is there a filter or screen in the back of the machine that needs to be replaced or cleaned periodically? We had it serviced once and the repair man mentioned it but I got that second hand as I was not with him as he serviced the washer. In short, what routine maintenance is required by us as users of this washer?


... Champion 24 in. UH-150B Built-in Dishwasher

Viking dishwasher code says water line problem, but water enters the dishwasher 1st cycle then stops.


... Viking DFUD142 Built-in Dishwasher

Dishwasher does not drain all water after wash, code C=drain hose,coase or fine strainer or sink blocked.(all checked & are ok) then towards end of wash code H= Call AEG service force ,comes up. but if i put machine on pre-rinse it driains ok, so pump is working. only seem's to be end of wash programe fault accurs


... AEG 22 in. Favorit 55750IM Built-in Dishwasher

I have a porter and Charles dishwasher. It comes up with two error codes. E1 and 1f. The repair person did not know why these codes meant, and is looking into it for me. Any help would be appreciated. Thanks Don


... Dishwashers

Our Asko 3530 dishwasher is giving us a 'water inlet fault' code. The machine goes through the pre-drain at cycle start then begins to fill, continues until it's full then kicks out the fault code. I have changed the inlet valve, reset the system to factory default and taken off the lower front panel, finding the overflow area to be dry. Is it time to call for service or is there something else to try before spending the big bucks?


Hi,This sounds like either the overflow sensor or the water control valve is stuck.Usually the valve is a solenoid valve that controls the entrance and fill of the water. If the overflow sensor is underneath, there may be wate ... Asko 24 in. D3530FI Built-in Dishwasher

At 2 minutes left in the wash cycle, the quick rinse light starts blinking and the timer goes to 0. My dishwasher is a Whirlpool Quiet Partner IV gu1500xtkbo dishwasher. I'm assuming the blinking light is an error code. What does it mean?


... Whirlpool Dishwashers

My Viking dishwasher won't fill with water. The motor seems to be running but no water enters the chamber. It's Sunday morning so I'm not able to get a repair person here. I got a response that said ''The ventilators are blocked. Turn it off and have the motor checked'' i was hoping for instructions on how to unblock the ventilators or clean it out. I have a house full of people for the weekend and would love to get this thing back up before Monday when a repair person could come. Any suggestion


... Viking Dishwashers

On 2/18/09, I had a part replaced (due to a recent recall issue) on our Bosch dishwasher, SHU43C06UC. I had not had any problems with my dishwasher - ever - and, since the replacement, my dishes are not being properly cleaned. The Sears repairman who replaced the part tells me that the part he replaced has nothing to do with my present issue and, because my DW is no longer under warranty, I would have to pay for any further services he may provide. 1) What do I need to do to troubleshoot this di


Http://www.boschappliances.com/safetyrecall/dishwasher/default.aspx?pid=BCH0905OIQ001 ... Bosch 24 in. SHU43 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2370 seconds