Having problems with your Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher ?

Detergent dispenser Our detergent dispenser is broken, ie, the catch has broken so the door won't stay closed - where can I find a replacement part? thanks!


Answers :

Here is a link. Sears.com as almost any part for anything including diagrams. The pricing on the part seems WAY out of range. Usually dispensers cost around $60.00 At least you can find the p/n and google around for it on some other sites. I can't imagine it's that much.

http://www.searspartsdirect.com/partsdirect/showPart.pd?partNumber=PD150001&productGroupId=0022&supplierId=425&brandId=x&documentId=10057058&keySuffixId=NA&modelNumber=x&keyId=000018&pageId=00002&productTypeId=x&searchModelNumber=VUD141&subCompDesc=Door&brandDesc=VIKING%20RANGE%20CORP.&modelDesc=UNDERCOUNTER-DISHWASHER&backToLink=Return%20to%20part%20list
Repair Help & Product Troubleshooting for Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Detergent dispenser Our detergent dispenser is broken, ie, the catch has broken so the door won't stay closed - where can I find a replacement part? thanks!


Here is a link. Sears.com as almost any part for anything including diagrams. The pricing on the part seems WAY out of range. Usually dispensers cost around $60.00 At least you can find the p/n and google around for it on some other sites. I can ... Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher

We have a Whirlpool mod# DU1055XTVD0 dishwasher .. the blue latch designed to keep the lid to the detergent dispenser closed after filling has come loose from the inside door panel and now will not stay in place to keep the detergent lid shut. We did find a small o-ring in the bottom of the tub that apparently is part of what helps maybe hold this latch in place, but obviously there must be something else that fits inside the hole the latch goes in that keeps it secure. This


... Whirlpool Dishwashers

I need to replace the detergent dispenser as the door is broken. I have the new part but do not know how to remove the old part


... GE 24 in. PDW7880JSS Built-in Dishwasher

Ge dishwasher model num.GSD2400G01.soap dispenser not opening during cycle.took it apart to replace broken handle.now i have a hard time opening and closing door.when door is closed,it wont let the soap out.dont know if gear-like parts are lineing up or not.please how can i fix this problem.


Hi\015\012If the soap dispenser door doesn't closes on your GE dishwasher then disconnet the dishwasher from power and check the spring & plastic tab under the timer. Check the plastic tab, it breaks often and will not let the soap door t ... Dishwashers

Need new detergent cup dispenser for Model KUDI220T4. The detergent cup dispenser (Part number AP3042989) has been discontinued. Need to find the replacement part and directions on how to remove existing detergent cup dispenser and install new detergent cup dispenser.


... Kitchen and Much More Dishwashers

I have a KitchenAid but model # KUDI24SEWH1. Can not find it on your list although another model without the last letters 'WH1' is on it. Anyway, my nephew ordered the parts he said needed to be replaced. One was the top water feed tube and bearing which he had no problem replacing when the part came in. But, he is having a very difficult time opening up the front door to replace the soap dispenser. Removed the 6 screw (three on each side) and the two at the top of the door but that is as far


You don't Use the WH2 just the first 6 letters and numbers.\015\012Jim ... KitchenAid KUDI24SE Built-in Dishwasher

Maytag MDB8859AWS, cover latch that's a part of the detergent dispenser came entirely out of the hole that the long spindle on the end of the cover latch fits into it. Does this mean the part's broken? Now the detergent dispenser won't open automatically. I can TRY and close the cover after I put the cover latch's long spindle back in the hole, but something doesn't seem right. Only three months old!


... Maytag MDB8859AWS Stainless Steel Dishwasher

The detergent dispenser [Main Wash] door doesn't stay closed. It seems like there is something wrong with the latch, but we can't what. We've cleaned it, but don't know what else to try. There don't seem to be pieces missing or broken. But no matter what, when we put in the detergent [we use the cubes] the door always just pops open and the detergent ends up falling to the bottom on the dishwasher. The dishes are still getting relatively clean, but we want to solve the problem with the door


... Frigidaire FDB1200RG 24 in. Built-in Dishwasher

My Viking DFUD042 dishwasher soap dispenser release is broken. The soap dispenser does not close. Can I replace only the latch or do I have to replace the entire soap dispenser? Where can I get the parts? Thanks, Robbie


You will need to replace the entire soap disp. You can find it at marcone.com w/ your model # ... Viking DFUD042 Built-in Dishwasher

The door flops open as the rope has broken. I have the replacement part but need a diagram to show how to replace the part. Where can i find the diagram?


Documented in the manual...The plastic part goes on the metal hinge on the door...follow the rope down to the top wheel (clockwise and around) to the bottom wheel (counterclockwise and around), attach to the spring. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

The door of the detergent dispenser of my Whirlpool DU1055XTVQ2 will not close. Is there a spring/latch that I can replace, or does the entire dispenser have to be replaced?


... Whirlpool Dishwashers

Broken detergent dispenser. Can I replace it?


... Miele G2150SC Dishwasher

Door leak I have a small leak between the bottom of the dishwasher door the lower service panel on the dishwashere. I did replace the seal on the inside bottom of the door along with the other parts that come with the door seal. Could there be a gasket leak around the detergent dispenser or the vent at the top of the inside of the door. I did not check the water lever as was mentioned in a previous question on water level, but the float does move up and down quite freely. Any suggestions as to w


I had my dishwasher leaking alot at the bottom of the doo,r and found out that the steam vent was very cloged with gunk. After taking the vent cover off on the inside of the door and cleaning, then putting the vent cover back on NO MORE leaking. Th ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

We need to replace the little rubber latch that keeps the dispenser door closed on our Kitchenaid dishwasher. Do we need to replace the whole detergent dispencing unit or just the latch. And if we do have to replace the whole thing, do you know how it attaches and have advice for that repair? Type is Kitchenaid KUDS01IJ


Check here ... KitchenAid Dishwashers

Model FDB956RBC0 Broken plastic handle to open door. Can it be replaced and how do I find a replacement part?


... Frigidaire Dishwashers

Hi, The detergent dispenser COVER on my electrolux esi 602 dishwaher has broken and fallen off. Please can you explain if the dispenser unit can easily be replaced; or do i need to take off the inside door panel in order to do this? Thanks, Verman


... Electrolux 23 in. ESI602X Built-in Dishwasher

Broken vent in dishwasher door . Is it replaceable?Where do I find replacement part?


Call your local used appliance man, they do repairs and sales of various models. Chances are they may have one and give it to you, if you promise to give them your future business while accepting their business card. ... Dishwashers

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

Hi i have a technika bellissimo dishwasher and the cutlery basket has perished, i need to find a replacement. Also, the powder, tablet dispenser does not close or open properly so i need to just put the tablet straight in the dishwasher is there a spare part for this? many thanks!


Make sure the top drawer is fully pushed in when closing the dishwasher - that fixed the dispenser problem for us ... Dishwashers

The little plastic arm that holds the soap dispenser closed on my model DU1055XTSD2 dishwasher broke off. I can't find the part to replace it.


Must get new soup dispenser ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

Looking to find the coorect dimensions of my ASKO ASEA 1402 also looking for replacement ot broken part(dispenser)


... Asko Dishwashers

The detergent dispenser door won't stay closed. A 2 inch long part came loose. How do I repair


... Kenmore 13743 Staimless Steel Built-in Dishwasher

The soap dispenser cover for the main wash section has broken. I think that is why the dishes are not getting clean because the soap is washing away with the first rinse. I cannot find where to get a replacement part.


... KitchenAid 24 in. KUDK02CRBS Stainless Steel Built-in Dishwasher

I was given a low hour, 10 year old, CH PW205002LE 6.5 HP gas vertical shaft 2000 PSI/2.5 GPM pressure washer with a Lavor pump. It did not work - no pressure. I found a broken o-ring on the brass unloader valve and replaced it with a ring as close in size as I could find as the part break down doesn't state size. Everything was very clean. I coated everything with silicine grease and reassembled, seating the brass piston? as deep as it would go. I had to press the trigger in order to get the mo


My personal experience is that 40% of all the sellers I dealt with on e*** exaggerated their products or worse. If you decide to go the e*** way be sure you put it on a good credit card so you can get your money back if it's a bust. Don't use your ba ... Campbell Hausfeld Pressure Washers

Whirlpool dishwasher soap dispenser door will not stay closed. I think a part may have fallen off and I can't find a picture of it.


... Whirlpool Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1049 seconds