Having problems with your Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher ?

Viking VUD 141 doesn't complete cycle. Put in new timer and still won't complete cycle. Help?


Answers :

Repair Help & Product Troubleshooting for Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Viking VUD 141 doesn't complete cycle. Put in new timer and still won't complete cycle. Help?


... Viking 24 in. Professional Series VUD141 (Ultra-Premium) Built-in Dishwasher

I have a 4 year old Maytag MDBH945AWW and the panel lights come on and I can select cycles... but the dishwasher wont start. I tried holding the start cancel button, tried turning the breaker off for a couple of hours, took the inner panel off the door and checked the latch, but its still wont start. Any other suggestions? If it needs a new control panel its probably better to just get a new similar dishwasher for $300, correct?


What you need to do is read for continuity and power across the door latch switch. (2 white wires) AND 2 Black wires Both wires must read continuty at the control panel connectors to the power source terminals for the unit to start. Since the co ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

Have spent $300 in the last week on Haier HDW101ss repairs. It still isnt fixed. The repair guy 'thinks' it is now a faulty timer. The unit hangs at certain points in the cycle. At these points the timer (ticking) noise stops but the machine carries on washing. It will hang at this point indefinately. I have taken the timer out, and it looks brand new (the unit is only 4yr old). Any advise, does this sound like a timer issue, or could it be something else? Where can i source a cheap (2nd hand)


... Haier Dishwashers

My kleenmaid dishwasher super silent model system DW5 doesnt appear to be heating the water on any cycle so it is not washing properly and leaving the powder etc on the glasses up the top particularly and also it does not go completely to the end of the cycle by itself(any cycle).Or completing the drying cycle. I have to switch to 0 cycle to make it complete the clicking to start again. What is the gauge on the inside of the dishwasher on the left that can be adjusted from 1-5 is this a heat


Http://frigidaireservicetips.com/pdfs/486_5.pdf\015\012\015\012\015\012\015\012Service manual, generic, use this to troubleshoot and repair.\015\012\015\012 ... Dishwashers

Hi my nearly 9yr old neff S5555XOGB/40 integrated dishwasher has problems on the control panel the program times come up with the completely the wrong times for the wash ie the 150 one comes up saying 32minutes on a quick wash it gets stuck at 1 minute left and keeps going on, also the delay timer timer is not working ( I have been told this could be a problem with the programmer) . Is it cost effective to get the progammer changed plus engineers cost or shall l look for a new dishwasher? Th


... Neff 24 in. S5543X2 Built-in Dishwasher

Machine doesnt start . when on button is pushed and regular wash button is pushed it goes to agent and cycle is at 0 flashing (both 0 and agent lites).have tried to shut it off and main switch and turned it on and off a few times. and still the same


Because the timer controls many operations, a faulty timer can cause many problems. The timer is a complex component, so you shouldn't attempt a do-it-yourself repair. Test the timer with a VOM set to the RX1 scale. To gain access to the timer, ... Bosch Dishwashers

I have a MDBH945AWW that is just over one year old. It has just started making a various new noises. Grinding, loud buzzing and such. Still cleaned the dishes and completed the full cycle. I followed the solution that bgreenatown gave for removing obstacles. Found some soft material but did not seem that it would cause an obstruction. Removed it and put it back together but it is still making noises. Any next steps?


Hi,\015\012This soound is from the pump assembly. Looks like the "CHOPPER ASSEMBLY". Try to pull the pump apart and take a look.Go to www.sears.com and put in your model number, ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

I have a Candy CS 455M slimline dishwasher which is 3 years old. The program button has stopped moving round I put dishwasher on and went to work and it was still washing the dishes when I got home from work 8 hours later. I thought it might have stuck and been a one off but no it happens every time is it the timer? is a new timer easy to fit?


... Candy 17 in. CS455 Built-in Dishwasher

I have a GE DISHWASHER model #GSD2100R20BB. The motor/pump mechanism has been replaced with a brand new one from GE, The water valve and timer have been replaced with brand new ones from GE and the dishes on the top rack are still not getting clean, can someone point me in the right direction here; please?


Have you looked at the spray arm itself? sometimes over use the spray hole get clogged with debris, clean it and then check the return water filter for debris. clean the filter and check in the hole under it that feeds the pump. ... Hotpoint Dishwashers

Heller Dishwasher DWH16 has completed cycle and the door wont open. I put it on again wishful thinking and it still wont open. Can you please advise.


... Maytag Dishwashers

My kuppersbusch igv659 wont finish the programme it gets to 1 min and wont complete cycle, keeps just throwing hot water around and will keep doing this until you swith off and reset the timer.


... Kuppersbusch Dishwashers

Hi, my LG LD2120WH dishwasher stopped working recently because of the detergent container being empty and the salt level too low. After replacing these the machine still doesnt want to start washing. The timer displays fine but doesnt count down either and the machine turns off after a couple of minutes. Please help.


... Dishwashers

Broken dishwasher idl350 dishwasher fitted a new element but it still wont heat the water what coud the problem be. have checked on everything i can think of but it stil wont work. would it be eney broken wires it the door?


IF your dishwasher is a 220 volt unit find and reset BOTH breakers for it. Also make sure someone hasn't inadvertantly hit the"heat dry" button to off. ... Dishwashers

EDW5500DSS wont completely drain water Okay so now that my dishwasher runs, when it finishes a cycle it has a nice puddle of water at the bottom that never drains completely out. I am assuming its a relay or something because I looked for a floating switch (did not find), I can hear a pump sound as if it wants to pump the remaining water out, but, it doesn't. I really want to solve this problem soon so I can order the new door seal and needed part together. Checked the line out and of course i


The srainer over the pump could be clogged not letting the water drain quick enough. Be sure the screen is cleane out. I believe you would have already checked and cleaned this. I believe it is the impeller on the pump that pumps the water that is ei ... Dishwashers

I have a maytag dishwashwer DWC7602AAB, Made terrible noises wouldn't do anything but spray alittle bit of water in the bottom and that was it. Purchased a new motor, still didn't work and just replaced the timer and still not working help


... Maytag 24 in. DWC7602 Free-standing Dishwasher

Hi my nearly 9yr old neff S5555 integrated dishwasher has problems on the control panel the program times come up with the completely the wrong times for the wash ie the 150 one comes up saying 32minutes on a quick wash it gets stuck at 1 minute left and keeps going on, also the delay timer timer is not working ( I have been told this could be a problem with the programmer) . Is it cost effective to get the progammer changed plus engineers cost or shall l look for a new dishwasher? Thanks Su


... Dishwashers

Bosch dishwasher Dishwasher runs much longer than timer, stays at 88 minutes for an hour! When I open it and then close again, timer will say 90 minutes! It will run for hours till cycle is completed! Most of the time dishes are still wet.


Hello guest. seems you have a leak in the base. Looks as though motor is washing dishes but actually its the drain pump thats been activated which doesnt allow the timer to proceed forward. ... Bosch 24 in. SHU53 Built-in Dishwasher

I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?


If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher

Miele 868 dishwasher-water fills at begin of cycle,but pump/wash cycle doesn't engage(timer dial still advances,drains at end of cycle.dishwasher was workong,but was moved to a new location ans hasn't worked since.impeller moves freely and pump was rotated via 8mm hex key.is there possibly a reboot/reset, or is there possibly a water pressure issue?-I didn't think so as the dishwasher fills to the prescribed level.


... Miele Dishwashers

Wont dry Hello, I have the Asko D3112 dishwasher. It washes great, but does not dry completely. After a wash everything is still drenched as if i splashed in a bucked full of water. I know it drains properly (i hear it draining down the sink), and it attempts to dry (hot air). I also am using the rinse aid as specified in the manual. Any tips would help. thank you Andrew


Make sure you select a high temp wash and the heated dry as well Also, dont put too many plastic items in there at once, they dont dry very well in anything. Check the amount of soap you are using, it shouldent be more than 2 tablespoons (way less th ... Asko 24 in. D3112 Free-Standing Dishwasher

I have a new Frigidaire FDB1050RE diswasher. I ran it for the first time set on normal wash and pressing both the Hi-temp wash and heat dry button. This cycle is supposed to take a total of 89 minutes to complete including the drying cycle. After 89 minutes it was still in the wash cycle so I cancelled it to preserve sanity. In the instruction manual it states that the water temperature must be above 120°F. Our building's water heating unit is set at 110°F. Why there is a lower temperature


It should still work pretty well but you probably can't use the high temp wash because it will take too long for the dishwasher to heat up the water enough to satisfy the high temp washer thermostat. If the thermostat's calibrated closing temperature ... Frigidaire Dishwashers

I have the new kenmore elite, stainless steal front....and have had it for about a year...and have noticed that the dishes are foggy even after dry and as if still dirty. The soap is streaked all inside the washer as well. I have been using Cascade Complete and jet dry.....is this the best dishwasher soap to use? HELP Karen, from California


Have you ever used a product called affresh it is sold at your local home depot and comes in two types one is for front load washers and the other is for dishwashers and let me tell you this product works great it actually cleans the inside of your d ... Dishwashers

My ESL 6115 ssems to be stuck between cycles, it beeps as its finished the cycle, but it still has water in the bottom, and wont accept a new cycle, so not working also the light at the top righthabd side of the door with a sign of an arrow pointing at a straight line is constantly flashing. your help would be greatly appreciated!!


... Dishwashers

My dishwasher wont run when i push the start / cancel button the washing light comes on and blinks ,but the dishwasher does not turn on . i put in a new control panel and it still does the same thing.


Check the water level switch/ pressure switch.Control panel may not have full control. There may be yet another board inside! ... Frigidaire Dishwashers

When starting wash cycle the dishwasher cda cw447 doesnt appear to be getting enough water in and is making a droning / whirring / electrical ? noise. pipes all connected ok inc aquastop water supply unit, no kinks etc. machine 3 1/2 yrs old, just started making this noise. appears to complete rapid cycle but still making unusual sound. water drains away fine from this cycle, dont believe pipes / hoses are blocked.


Try removing the inlet pipe, and refitting, might fix it, else likely that the \015\012Inlet water soleniod failing/failed or tiny mesh filter (it does come out for cleaning) behind the inlet hose clogged. Temporaily bypass the aquastop water s ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0939 seconds