Having problems with your Whirlpool 18 in. ADP530 Free-standing Dishwasher ?

My ADP 542 Dishwasher is not heating water and dial isnt moving through the cycle. Is thi cos element is gone? Is it worth replacing? Machine is almost 7 yrs old


Answers :

Repair Help & Product Troubleshooting for Whirlpool 18 in. ADP530 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My ADP 542 Dishwasher is not heating water and dial isnt moving through the cycle. Is thi cos element is gone? Is it worth replacing? Machine is almost 7 yrs old


... Whirlpool 18 in. ADP530 Free-standing Dishwasher

Whirlpool dishwasher part #3385181. Machine had gone thru wash cycle and was starting to dry. Smelled electrical burning smell, opened washer door and washer was filled with smoke. Turned everything off, cleared smoke, and the washer water dispenser is very hard to turn. Washer has symptoms of burnt up motor that turns water dispenser. Machine is 12 years old. With cost of replacement motor and possible part (pump?) that might have clogged and caused motor freeze up, is it worth fixing or junk


... Dishwashers

Whirlpool model GU2400XTPQ7 (Canada) plastic tub has discoloration from heat element......plastic directly under the element has dried out and cracked....it almost looks like it has been eaten away......now I have a leak! Virtually impossible to fix without replacing the entire plastic tub. Of course because the machine is four years old, the warranty has expired. Is this a common problem? Heard of this before?What now???


... Whirlpool GU2400XTP Built-in Dishwasher

We have a Blanco BFDW 650S dishwasher approx 6 years old. We have been quoted over $450 to replace the inlet valve. Is it worth spending this on a machine this old? Am I being overcharged for this work as I can buy the part for $165? Is this something I could do myself? Can you recommend any tradesmen in the Brisbane area who can do this?


When you buy Bosch, you buy quality, quality costs, it is that simple. That price for you valve is a bout normal, but there are other consumables that are used as well, as travel, and labor. etc. You need to contact your Bosch agent in your local ar ... Bosch 24 in. SHU43 Built-in Dishwasher

Wife put washing up liquid into the machine and let it run it was full of bubbles and now it wont heat the water think the element is gone but the timer wont move past the heating stage if i replace the element will that sort the problem or will i have to get a timer as well?


If you put manual detergent that hapend, it could burnd electronis card (or mechanical timer-programer blowup), thermostat or the presostat, the heating element must be OK. ... Dishwashers

My dishwasher (Maytag MDBH965AWQ quiet series 300 was purchased in May 2006 (making it just a little over 4 years old). The handle broke on it initially and now the control panel has gone out including the start button. The cost of the replacement parts is right around $200, so I don't think it is worth investing that kind of money into it since it seems to be a lemon anyway. I have always been faithful to Maytag. At the time of our kitchen remodel in 2006, we chose all Maytag appliances. I


Well Kathy, you may be in luck. There has been a safety recall on your model of dishwasher and Maytag will give you a considerable allowance to replace with another Maytag. You may contact them at 1-800-544-5513 with your model and serial number and ... Maytag Dishwashers

Dishlex Global 310 isn't heating the water. I assume that this is the heating element. The unit is 10 years old. What would it cost to repair and is it worth repairing or time to replace.


... Dishwashers

My Frigidaire is leaking at the pump and motor connection. It is 10 yrs old and I want to know if it is worth it to repair it or do I need to replace it. The bottom door seal also came off and it has a small leak there as well.


Hi,\012I would replace it...\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101 ... Frigidaire 24 in. FDB435RFR Built-in Dishwasher

Our dishwasher came with our house. Brand new. It is 2 yrs old now, warranty gone. The problem is when you shut the door the machine starts running immediately and keeps running and running and running. You can push the stop button, delay button and it still runs. Also, doesn't clean. model# FDB1050REC4


... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

I have a Miele G868 dishwasher. It is 15 yrs old. 8 months ago the soap dispenser wouldn't close, so I got another dispenser from Miele and replaced it myself. Everything worked fine until 3 months later, when the soap dispenser did not open. After 3 restarts, it began to function as it should. Now 5 months later, the soap dispenser is not opening at all. Here are my observations: 1. Economy wash cycle should run 35 minutes but only runs 13 now. 2. Water in machine is not hot, even though I run


... Miele Dishwashers

I have had a leak (probabaly from the hoses where they connect to hot/copld water inlets) the machine is 8 yrs old - do I need to simply replace the hoses or are there rubber washer inserts to be used instead?


First make sure that all the pipe connections are tight and are installed properly ... Bosch Dishwasher Accessories

Circuit breaker tripped again.( this is the second time). the dishwasher is almost eleven yrs old and I don't want to start replacing expensive motors if it's just a bad breaker.


... Hotpoint 24 in. HDA3700G Built-in Dishwasher

Smeg dwd 64 sse. everytime I put it on a full cycle it starts at the 2nd light and just remains on that programme and sometimes does not even stop I have to stop it manually. do you think its the pcb that has gone and is it worth replacing on a 6-7yr old dishwasher?? always been good up till now


... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher

CMA-180 Dishmachine-4 years old, used up to a maximum of 5 times a month. After 10-12 loads it shuts down, alto the lights are on, it won't start for about 30 minutes. Is it possible there is a heating element in the machine that needs replacement, or our water heater is not keeping up?


... Cma Dishmachines CMA 180 Free-Standing Dishwasher

I have a JDB1090AWS about 3 years old. We noticed a smell and found cutting boards and plastic cups melted. Machine was off. Had to turn off the breaker. Checked both leads to element & have power even with machine off. Not sure if it could be the limiting thermostat; I assume that is to shut the heat down when it gets too hot. Element is on though when it shouldn't be to begin with. I did have to tighten the water supply. Had some water underneath, but all wires seemed dry. Any tests I should t


The heat element can only get so hot.It's timed so it doesn't exceed a period of on, exposing dishwasher contents to continuous high temps.Watch the timer and take note how long it broils your cookware.Good luck. ... Dishwashers

FIsher Paykel DD6031, motor needs replaced, Is it worth it?


Dont bother repairing the Unit the Timer is Fried, Its worth about $350.00 W/ Labour, I'd buy a new one Personally. Goto ajmadison.com they have fantastic deals. ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Leaking dishwasher leaks intermittently. I removed the side panels and there is no sign of water in the base of machine. Door seal seams to be intact. What else can I check. Seal that needs replacing? Machine is 18 months old. seams to leak on the right side of the machine. Please advise. many thanks. My dishwasher showed the error code either OE or E1, I think it was more OE. I stuck my hand in the filter in the bottom of the machine and then it was okay but the next time it was used it leake


What sort of soap powder do you use\015\012some soap powders foam a lot in machine causing dishwasher to leak through seals\015\012also check that the machine is square that is the door is closing parallel with cabinet\015\012do no ... Dishwashers

We have a 6 year old Jenn Air dishwasher model JDB2150AWP We had a cracked door close unit which we replaced but got a short while restoring connections I am wondering if there is an internal circuit breaker, relay or fuse on these machines that we need to check and possibly replace since we cannot get it to run at all. No power or lights at all. I believe all connections are secure and we replaced the door close unit with new parts.


... Jenn-Air 24 in. JDB2150AWP Built-in Dishwasher

Miele Dishwasher Model G1040, Type HG03, NR: 32/65143704 The machine is three years old. The cycle reaches almost to the end, then all three LEDs merge together, and the pump runs continuously, even with the master switch off. I have taken the machine out and removed the base plate. When I first took the machine out of its position, I tipped it backwards and water came out of the bottom. All hoses and parts in the bottom section seem perfect in every way but the inside of the bottom plate indica


... Dishwashers

Leaking dishwasher leaks intermittently. I removed the side panels and there is no sign of water in the base of machine. Door seal seams to be intact. What else can I check. Seal that needs replacing? Machine is 18 months old. seams to leak on the right side of the machine. Please advise. many thanks.


There are screws on the inside of the door on a lot of those\015\012try to tighten them down a little sometimes that can cause a leak. ... LG 24 in. LD-12BW5 Free-standing Dishwasher

Dishwasher leaking. I was supplied a flat seal ring of about 100mm dia., 10mm wide & 1 mm thick for the machine when I bought the house. Water on the floor tells me something underneath is leaking for the first time. The machine is about 10 yr old and in very good order .This seal could be the problem so before I go getting service personel in I'd like to know if replacing this and the door seal are jobs a careful handyman can do ?


I would say you could do it with out a tech.More then likely you can find information on the web on how to do it step by step or hey use this site more then likely one of us has had the same problem. ... Dishwashers

Model- kudm25shwh1 leaking under door when draining. I have replaced the gasket-for the tub, door seal, tub spacer. checked the top vent (cleaned the gunk out). checked the screws on the main sprayer. unit is 9 yrs old. is it time to replace?


... KitchenAid 24 in. KUDS25 Built-in Dishwasher

I have a Miele 24 in. G638 Plus Free-standing Dishwasher which is leaking into the pan underneath the machine (and triggering the polystyrene float switch) I am almost certain that the leak is coming from the main pump seal. Is it feasible to replace the seal (it looks like a major job to take the pump assembly apart). I guess Miele labor charges would make the repair not worthwhile Is there a service manual for this machine. I guess I would need it


Hi\015\012\015\012Please check the bellow link to have a detailed view regarding your query…..\015\012http://www.appliance-r ... Miele 24 in. G638 Plus Free-standing Dishwasher

Global 450 dishlex dishwasher. Had the handle replaced 2 months ago. After that the ready light did not switch off as before. Now it only rinses. When you set the normal wash cycle the lights for Pre Wash, Wash and Rinse all come on. Pots cycle, the Pre Wash, Wash, Rinse and Dry all light up together, hence the machine thinks it up to that stage of the cycle. Can this be repaired or not. The machine is approx. 12 -14 years old.


... Electrolux Dishwashers

I have this dishwasher and it won't drain - I LOVE this dishwasher. It cleans better than any I've ever had. I can't remember how old it is so don't know if its worth fixing. Nobody seems to like their new dishwashers so I'd almost rather fix my old one that has never let me down...but its black...and all my other appliances are stainless....


Probably the flapper in the pump has broken off and is blocking the pump outlet hose. ... Maytag 24 in. MDB4000 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1343 seconds