Having problems with your Whirlpool 24 in. ADP6940 Dishwasher ?

Whirlpool 6600 24 inch dishwasher: low pressure,arms not spinning

\015 HI, Since a year i have a Whirlpool 6600 24 inch dishwasher. Until today it worked great but now it does not pump water with enough pressure to get the arms spinning. The lowest arm moves occasionally but the upper arm does not recive any water at all. There is plenty of hot water in the machine it does just not pump it with enough pressure. Is it possible that my pump is faulty just after a year of use or should I look for anything else?\015

Answers :

Your water pump is blocked. You will either call a repair person or disable the top of the pumb (inside the dishwasher, bottom) and check the water input duck. It just might be just some food, etc.. that is blocking the input. But if you don't see anything then it will be futher inside and will need to be removed and cleaned. BIG pain...
\015\012
\015\012Best of luck. BTW, I have the exact same problem but mine is further inside so I have to remove the whole dang pump, arggggggg.
\015\012
\015\012Rick
Repair Help & Product Troubleshooting for Whirlpool 24 in. ADP6940 Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool 6600 24 inch dishwasher: low pressure,arms not spinning


Your water pump is blocked. You will either call a repair person or disable the top of the pumb (inside the dishwasher, bottom) and check the water input duck. It just might be just some food, etc.. that is blocking the input. But if you don't see an ... Whirlpool 24 in. ADP6940 Dishwasher

I have a frigidaire dishwasher model fdb750rcs0 inwhich the spray arms do not spin. they spin by hand. when you run the dishwasher water comes out of spray arms about 4 inch but arms do not spin.


Remove all the hardware in the machine.Removable trays and such.Such as the arms baffle etc.look really good in the water outlets of every orifice.There will be water outlets under the arms that spin,that`s how it turns,this water pressure turns the ... Dishwashers

I just bought a whirlpool model DU1014XTXQ dishwasher from Lowes. I got half unpacked from the box before I noticed their was no sound insulating blanket. To help me decide weather to return it before I install it I have 2 questions; how quiet is this dishwasher without a blanket? (subjective...i know. Also can I install the blanket from the old dishwasher over this new model without adverse consequences? I tried to get these answers from Whirlpool but all they could tell me was that it doesn't


... Dishwashers

I just bought a whirlpool model DU1014XTXQ dishwasher from Lowes. I got half unpacked from the box before I noticed their was no sound insulating blanket. To help me decide weather to return it before I install it, I have 2 questions; How quiet is this dishwasher without a blanket? (subjective...I know. Also can I install the blanket from the old dishwasher over this new model without adverse consequences? I tried to get these answers from Whirlpool but all they could tell me was that it doe


Hello. I have been installing dishwashers for 35 years. Whenever the new one lacks a blanket I take the blanket off of the old unit and apply it being careful to trim it if necessary. I always use a good quality duct tape to make sure the blanket ... Whirlpool Dishwashers

New kenmore dishwasher and it is sitting too low there is a quarter inch at hole at the top of the dishwasher under the counter. It seems to be tight in the space; can we cut off the metal bracket that screws in under the counter. That way we can raise the dishwaster the quater inch. I think it is tight enough not to move around without the top screws. What is your opinion?


Hello,No do not remove this bracket. if you remove this bracket the dishwasher will tip forward when you ope the door!Why would you want to change anything by cutting a bracket? What is the matter with it!is your dishwasher doing so ... Dishwashers

Whirlpool DU1101 Hello, My Whirlpool DU1100 is only 1 year old. The dishes are dirtu and the soap doesn't disolve completely My husband is convinvced it is low water pressure, primarily from a leak in the sprinkler system in the park behind our house. I think it is just a clog of some kind preventing the water from getting into the dishwasher fill and/or spray arms. The maunual says you need 20 120 PS to run the dishwasher I doubt it is below 20 PS because of a leak in the park. Is there anyway


Well you should have water up to the heating element. if there is more than likly your chopper is the culprate. do you make sure that there isn't big food particles on your dishes because that is a lot of stress on that chopper and that is what help ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Good morning! My Whirlpool dishwasher (I'm at work so don't know the precise number) leaves about an inch of water at the bottom after washing. I called a Whirlpool representative soon after my purchase (post Ike devastation of previous dishwasher that drained fully) and was told that this was rather normal for Whirlppol. I live on Galveston Island in Texas, and adding any more sources of water and humiditiy to my household seems counterproductive. Is there anything that I can do to cause


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Dishwasher not draining properly or not draining at all issues\015\012can arise due to different reasons ... Dishwashers

Bathtubs was not listed in the "pick an expert" list, so choose dishwashers as closest thing to a bathtub. I have a whirlpool bath tub (don't know the make, but it is only 4 years old) It works fine but have a question - near the top of the bathtub there is a screaw in cap type of thing. It is a disk with a threaded bit on the back. The disk is about 1-1/4 inches in diameter and the threaded bit on the back is about 1/2 inch diameter and 1 inch long. Is this for allowing extra air into the syste


This would be a plumming issue. i do not know the answer you are looking for ... Dishwashers

I have a Whirlpool GU2700XTSB1 dushwasher. It stopped one day and cleanning light was blinking. I was able to reset the dishwasher by pressing two of the button 3 times. Now when I run the dishwasher it fills the bottom with water, heats the water and then buzzes. The wash motor does not spin. Any help?


... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Sears kenmore dishwasher; model: 665.13763K600 (made by Whirlpool). Dishes have debris after washing in all cycles. Arms spin, water is running, dishwasher drains, and I removed the sump assembly to clean the chopper inlet. How do I diagnose it. I put it into diagnostics cycle and am unable to identify the issue.


... Kenmore 24 in. 16012 Built-in Dishwasher

I have a brand new whirlpool DU1055XTV5 dishwasher, installed two days ago. After the cycle completes there is about 1/2" clean standing water left in the bottom. It is not just down in the well area, the whole bottom is covered with water. This is after running a normal cycle with no other options such as sanitize or heat dry. I called Lowes, the store that sold/installed it, and they said this is normal in new dishwashers to keep the parts wet. They said as long as the water does reach th


... Whirlpool DU1055XTS Built-in Dishwasher

Dishwasher i have fixed the fridgadair dishwasher so that i can see what it is doing with the door open; water is coming out of the spinner arms but the arms are not spinning ; it seems that water sprays about 4 inches in air; the top is feed water off and on but not constant.


  This dishwasher does not feed water to top and bottom arms at same time.  It starts with bottom and then after awhile it switches to top and then cycles.  If water comes out arms but arms won't turn,  check all holes in arms.&nb ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

My Whirlpool Dishwasher ADP931 has stopped working. It stopped in the middle of the cycle with 2 to 3 inches of water on the floor of the compartment. I mopped out the water and tried to restart the dishwasher. The green "on" light now comes on when I press the start button. but nothing happens (no motor comes on,no water enters).Repeating the above action several times does not help the washer to restart even though the other function lights will come on when the knob is turned. saturn1914


Hi,Whenever you see such symptoms, Time for you to investigate it properly. Check the below guide :-\015\012\015\012\015\012\015\012\015\012Power from the house\015\012\015\012Is\015\012there power getting to the dishwa ... Dishwashers

I have a Whirlpool dishwasher (Model #: du800cwdb5) and need help going about the repairs myself. When the dishwasher is turned on, the spray arm at the bottom does not spin, nor does it spray any water and the spray tower produces water but, rather than spraying, the water just kind of bubbles out of the top of the tower. The tower does also does not extend up as it supposed to.


There is something clogged in the motor/pump or its intake ... Dishwashers

Dishwasher does not drain or spin - Whirlpool 24 in. GU940SCG Built-in Dishwasher


... Whirlpool 24 in. GU940SCG Built-in Dishwasher

Whirlpool dishwasher top spinner and top rack spinner is not putting out water or very little and not spinning. I have taken apart and cleaned everything including the sump / chopper, can't find any blockage in the tubes that deliver water from the pump to the spinners. Is the Pump or Motor done? how can that be it's less than 5 years old? Its a Whirlpool Quiet Partner I Model DU1055XTPQ3


First, confirm that the holes are not blocked on these arms. (I did not want to assume you have done this.)Then check the impeller on top of the motor stem for being loose or worn/damaged - to rule the impeller out. If it is fine, then ... Whirlpool 24 in. DU1055XTP Built-in Dishwasher

At 2 minutes left in the wash cycle, the quick rinse light starts blinking and the timer goes to 0. My dishwasher is a Whirlpool Quiet Partner IV gu1500xtkbo dishwasher. I'm assuming the blinking light is an error code. What does it mean?


... Whirlpool Dishwashers

Have whirlpool dishwasher model DU1055XTSS2 and the top rack water wheel does not spin. Operated the washer with door opened and it gets water but doesn't spin. There are no restrictions to the jets on wheel and the wheel turns feeely. The only thing i can figure is inadequate water pressure....


... Dishwashers

Whirlpool dishwasher arm not spinning - Dishwashers


... Dishwashers

Dishwasher repair Dear Guru, I hope you are well this evening. I have a Whirlpool Quietwash Plus dishwasher (940 Series) that will randomly have water sitting in after running through a washing cycle. In addition, some mornings there will randomly be a couple inches of water sitting in the bottom without every running the washer. Need assistance. Any help will be appreciated. Thank you for your time. J


Without model unablr to look up exact unit, but in genreral, either ther is a blockage/clog in oyour drain line not alowing complete drain of cycle, as far as never really washing, i would look into perhaps a faulty/ sloppy door switch assembly. if f ... Dishwashers

Whirlpool dishwasher: Model DU920PWKT0; 8 years old Lately, have noticed not full drainage of water at end of cycle... about 1 inch standing (thus 2 inches at the sump). Glasses have had noticeable film on them. Ran the rinse cycle a number of times to explore problem. When I interrupted the cycle, the water on the bottom was soapy, yet no new soap had been introduced. I even colored the water "left" in the tub to see if it was replaced by fresher water. Although it was going through t


Find the 'tech sheet' behind the front 'kick plate' of the machine. This doc will give you a troubleshooting procedure for that specific machine. Check drain line and make sure it's clear and not kinked. Is filter clean?Has machine ... Dishwashers

I purchased a Whirlpool dishwasher # DU945PWSQ0 from Lowes Hardware. I don't see this model number listed but I need help just the same. There are two plastic bags containing insulation that were tacky glued to my dishwasher. I don't know if they are packing materials or should they be left intact.


That is insolation it stay's on ... Whirlpool GU2400XTP Built-in Dishwasher

Dishwasher bottom wont spin and is noise - Whirlpool Gold Dishwasher with Quiet Partner Iv Sound Package


... Whirlpool Gold Dishwasher with Quiet Partner Iv Sound Package

Prima dishwasher - arms not spinning - Whirlpool 24 in. DU1100XTP Built-in Dishwasher


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Whirlpool dishwasher low water presure upper level


Since you have low pressure \015\012\015\012Check the float switch inside the tub, it should move freely up and down.\015\012\015\012Check the harness to the mo ... Whirlpool GU2400XTP Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1894 seconds