Having problems with your Whirlpool 24 in. DU1055XTP Built-in Dishwasher ?

Dishwasher will not run. clean light flashes seven times

\015 The green light above the clean button flashes seven times and the dishwasher will not start. i have checked the water supply and if the float was stuck, both were ok. the diswasher was full when it failed. it filled with water and began it's cycle then shut down. the only feature that still works is the drain cycle when the drain button is pushed. how do i reset the dishwasher.\015

Answers :

I tried the button sequence described by guest #1 but nothing happened.... is there anything more to it?
This worked!! Thank you, we were ready to buy another dishwasher and you saved us around $400.00...
\015\012Thank you, thank you, thank you!
Repair Help & Product Troubleshooting for Whirlpool 24 in. DU1055XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher will not run. clean light flashes seven times


I tried the button sequence described by guest #1 but nothing happened.... is there anything more to it? ... Whirlpool 24 in. DU1055XTP Built-in Dishwasher

Whirlpool dishwasher GU2500XTPS3 QUIET PARTNER. "clean" light flashing. Unit will not run. Light flashes seven (7) times. Manual says call service and check heater circuit.


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Kenmore 665 17033400 Elite dishwasher clean light flashes 7 times and it wont run. i used the reset combination, all lights lit and stayed lit until i pressed reset. Then it started a wash. now the wash seems to be finished, though i am not sure and the clean light is flashing 7 times, pause, 7 times, etc.


That signals an issue with a faulty heater &/or heater drive circuit.(that info comes from their troubleshooting guide)I ran into it this weekend and discovered that the heater coil in the bottom of the washer was broken. ... Kenmore 24 in. 17032 Built-in Dishwasher

When we run our dishwasher at the end of the cycle it does not finish. The clean light flashes seven times then repeats. Some of the dishes and glasses come out feeling slimy. We were told it was a drying element. But the element did get hot. What's up with it?


Hi\015\012\015\012\015\012\015\012\015\012\015\012Thanks for using FixYa. If the\015\012clean light flashes 7 times, pauses, and then repeats. When the dishwasher\015\012doesn't sense a water temperature increase, it stops working a ... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

Whirlpool dishwasher Clean light is flashing which says check heat circuit. I've reset board a couple times and run diagnostic. Element tests okay. Light keeps going back to flashing when running dishwasher.


... Whirlpool DU1055XTS Built-in Dishwasher

Won't run; clean light flashes seven times. - Whirlpool 24 in. GU2548XTP Built-in Dishwasher


... Whirlpool 24 in. GU2548XTP Built-in Dishwasher

Whirlpool gold, quiet partner III, My dishwasher is not cleaning very well and when it is done it flashes clean. The clean flashing light wont stop. It flashes 7 times and stops for 3 sec then starts again. I know how to reset washer using heated dry and normal buttons but when i run it again when it is finished it goes back to the clean button flashing


... Whirlpool Dishwashers

Kenmore Dishwasher:665.13222K601, S/N FU2603549 purchased Oct 2007. Clean Light flashing seven times then a short pause and flashes seven times, repeating.


... Kenmore Dishwashers

My Frigidaire model FDBB2040FC3 "acts" like it starts running when I press start but after just a few moments the Start indicator light goes out and the Hi-Temp Wash and Air Dry lights start flashing... I can hear it "running" or doing something but it clearly isn't actually cleaning anything. I've tried cancelling, letting it reset itself and then restarting... even shut it off from the breaker. Each time the problem returns. We're a family of 6 so our dishwasher is pretty important in this hou


... Frigidaire Dishwashers

My 1yo slimline hotpoint dishwasher LST216 has developed a fault when trying to run the 'normal wash': washing stops after a couple of mins, the lights start flashing and the alarm comes on as soon as the water is being drawn into the machine. When I open the door I can hear a whirling/grating motor noise coming from the bottom of the machine. I have cleaned all filters and have run other programmes to check overall functionality and they all work as expected most of the time. I cannot unders


... Hotpoint Dishwashers

Clean light flashing flashes seven times - Kenmore 24 in. 17012 Built-in Dishwasher


I posted the solution to another persons question today with the same problem. Hope it helps. ... Kenmore 24 in. 17012 Built-in Dishwasher

I have a kitchenaid KUDP01FL dishwasher. The clean light is flashing 7 times. I am not able to reset it and the dishwasher will not run. I would like to know the proper reset sequence and if that does not fix it what to try next.


... KitchenAid 24 in. KUDP01FL Built-in Dishwasher

How to diagnose? My Kenmore won't run. First it was flashing the clean light 7 times, so I figured out how to reset ("High Temp Scrub"/"Air Dry"/"High Temp Scrub"/"Air Dry"), but when I try to run a wash, it sounds like it's not getting water into the tub. When I checked it several minutes later, it was in "Cancel" mode, making a sound like it was draining (or trying to drain), then the clean light started flashing 7 times again. Clearly, the machine has something wrong but I don't know where to


Once this code goes off, it is not going to run. The module has picked up ths issue as you said. I would check the sensor first. You can make sure it is getting current by testing the circuit. ... Kenmore Dishwashers

I have a DU1100XTP83 dishwasher and does not run. The clean light flashes 7 times, stops for about a second and then blinks 7 times, etc... Before all this started to happen, and I don't know if it was related, there was an odd odor I couldn't identify in the kitchen.


... Whirlpool Dishwashers

Dishwasher Fault Hi, My dishwasher is a Diplomat ADP8322 (which i think is a rebadged whirlpool unit) & has been playing up recently. When you start a cycle it is fine for a minute or so then it starts beeping, the rinse light comes on & the light next to the start button flashes 11 times, pauses then repeats. I have read online that this flashing relates to what the fault is, but i cannot find out what fault the 11 flashes relate to. The first time this happened i cleaned out all of the filters


... Dishwashers

I have a Kenmore Elite dishwasher (model 665.1315), and the dishwasher will run through the wash cycle as expected, but when it gets to the heated dry cycle , it doesn't appear to dry. It will then flash a fault code 81 (8 short flashes of the 'clean' light, pause, and then 1 more short flash of the 'clean' light, longer pause, and repeat the code). The dishes seem to be somewhat dry, but there is certainly water on the dishes and on the tub (there is never any water standing in the tub, and t


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers...Dishwasher Problems The ... Kenmore 24 in. 15932 Built-in Dishwasher

Kenmore dishwasher 665.13422k701, the clean light is flashing 6 times, pause, 1 time, long pause. What does this mean?


... Kenmore Dishwashers

I HAVE A WHIRLPOOL DISHWASHER AND THE LED LIGHT FOR CLEAN KEEPS FLASHING AND IF I PUSH THE CANCEL BUTTON IT PUTS IT IN TO A DRAIN CYCLE THEN THE LIGHT KEEPS FLASHING I CAN SELECT ANY CYLCE I WANT BUT WHEN I PUSH THE START BUTTON ITS LED FLASHES SEVERAL TIMES AND THEN STOPS AND THE CLEAN LED LIGHT STARTS FLASHING AGAIN


Check out it there is a water leak to the bottom housing. Usually this happens when there is a leak activated the flood sensor causing LED light turned on. Dry out the leak then leave it unplug for 24 hours so the sensor dry out by itself. Make sure ... Whirlpool Dishwashers

I have a kenmore dishwasher mo. no.665.17039401 the clean green light flashes 7 times and it keeps doing that if i try to start the dishwasher on the start button a red light flashs three times what do how do i fix it .i made shure the door was locked


... Dishwashers

Clean light flashes 7 times then restarts, but dishwasher won't run


This issue means that your dishwasher isn't heating. There are a lot of things that can cause this issue. Go to the link to see all the possibilities of what can cause this issue and how to reset the control board. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

My dishwasher quit working and the clean light flashes on it seven times.


... KitchenAid KUDC20CV Builtin Dishwasher

Dear sirs, I own a Kenmore dishwasher Model # 665.17039400. The clean light flashes 7 times and then repeats. It will not run, only the drain button will work. I changed the heating element from advise on another forum. This did not resolve the issue. Please advise promptly as my wife is going crazy without this appliance. Regards, R. Carmikel


... Kenmore Dishwashers

Reset code I recently had a problem with my dishwasher that required me to use a reset code on my control panel. I can no longer find the manual that tells me that code. I was wondering if anyone knows it as to save a tech call. The error occurs when the clean light flashes. We have checked the heating element and the tech told us there is no problem there, we just need to reset the machine. The error has occured again, but this time because I tried to run the machine right when we came home fro


I believe the reset sequence is accomplished by pushing the NORMAL WASH then HEATED DRY buttons in that sequence two to three times. The unit will enter diagnostics mode, but can be stopped by pressing the CANCEL button. Let me know if this helps. ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

Own a Kenmore 665 dishwasher. The clean light is flashing (7 times) and the machine won't run. Have pulled the control panel and checked the door latch switches and they appear fine. No obvious burned wires any where. Any ideas on what this could be? thanks


It sensed a problem in the heater circuit. try this sequence to reset the code. If it comes back again you will have to determine a cause.The reset sequence used was reported to be the following:\015\0121) Crack the door open. ... Kenmore Dishwashers

The clean light is flashing 7 times on my kenmore dishwasher and it won't run. What does this mean?


When the light flashes 7 times it is telling you the machine has a problem and the flash is a error code. depending on the model it could me that the heat sensor and circuit board has to be changed. check the make and model #.Go to searspartsdirect.c ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2029 seconds