Having problems with your Whirlpool 24 in. DU1100XTP Built-in Dishwasher ?

Prima LPR 600

\015 Hello ,\015\012My dishwasher seems to have tripped out,Any ideas how to reset the settings,I have pulled the plug out thinking it might reset to original settings to no avail,\015\012Please email me at \015\[email protected]\015\012\015\012thanks\015\012John\015

Answers :

Control Lock means that the entire dishwasher is locked, for child safety purposes.  It's normally cleared by holding the "No Heat Dry" button in for 4 seconds or more.  It is locked again by the same procedure -- holding the "No HEat Dry" button for 4 seconds (or more.  Try this.
Repair Help & Product Troubleshooting for Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Pump stuttering at last cycle, no water pressure (Prima LPR 600


... Dishwashers

Prima lpr 450 switch beeps - Kuppersbusch K 24 in. IGVS 669.1 Built-in Dishwasher


... Kuppersbusch K 24 in. IGVS 669.1 Built-in Dishwasher

Prima LPR 600 dishwasher manual


... Dishwashers

Prima lpr 600 dishwahser


Control Lock means that the entire dishwasher is locked, for child safety purposes.  It's normally cleared by holding the "No Heat Dry" button in for 4 seconds or more.  It is locked again by the same procedure -- holding the "No Heat Dry" ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Prima lpr 601 does the prewash cycle and drains it and then 4 beeps and goes to the end of cycle and shuts down tried ion different heats but only does the pre wash cycle any help please


... Dishwashers

My prima lpr 450 is not working the power light is on but will not programme or catch when closed?


... LG LDF9810ST Built-in Dishwasher

Continual beeping I have a Prima LPR 450, when I switch it on it beeps continually and won't let me choose and programs. Just keeps on beeping!


I've had this problem a couple of times.. I filled a pan of water, poured it into the bottom, turned it on and made sure the pump was actually pumping. I then unscrewed the dishwasher from the housing and turned off the water and electric ... Dishwashers

Prima LPR 600


Control Lock means that the entire dishwasher is locked, for child safety purposes.  It's normally cleared by holding the "No Heat Dry" button in for 4 seconds or more.  It is locked again by the same procedure -- holding the "No HEat Dry" ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

My Prima LPR 600 shows the fault code of four flashes followed by a pause. Any ideas please?


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

My prima lpr 600 wont drain


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

I have a prima lpr 450 and it has stopped working. Now, when I turn the power button on the lights flash and then it beeps around 30 times. When I close the door it makes a noice as if it is starting then it stops and the beeps also stop. I have seen on the web that many others are seeing tyhe same issue but I have not seen a solution. Hope you can help.


... LG LDF9810ST Built-in Dishwasher

Prima dishwasher model lpr 661 - Whirlpool Dishwashers


... Whirlpool Dishwashers

No lights on prima lpr 600 dishwasher just keeps filling up with water not draining


When there is no light at all, and machine is stuck with inlet valve open from start, then it is probably a faulty timer control board.Before replacing the control board , the inlet valve, wiring harness, and additional electronic control ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Prima lpr 600


Sounds like something may be blocking the pump, causing overload -- may need a service call. ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Seem to have an earth fault with a prima lpr 450 dishwasher runs for about 15 min then trips our electric.It did a few times from new (about 3 years old now) then stopped doing it, now does it nearly every wash.Any help would be nice.Thanks Gary


Hello gcsounds,\015\012If I understand your problem correctly, it appears that you have a ground fault ( or earth fault) that is causing your breaker to trip. I am assuming ( but don't know for sure ) that your dishwasher is hard wired into a j ... Dishwashers

Hi, I bought a second hand prima lpr 450 dishwasher, and I switched it on, the light is on, but I can not get it to work, the button ''program'' does not do anything. Please, help.


Hi, thanks for your help. We have solved the problem and the dishwasher is working! Thanks. ... LG LDF9810ST Built-in Dishwasher

Hi I have a LG LD-2052 dishwasher. It gives me an E 0 error - the water does not pump out when I open the machine after a few minutes when started to wash and message of E 0 appears? Have cleaned an


... LG Dishwashers

Machine doesnt start . when on button is pushed and regular wash button is pushed it goes to agent and cycle is at 0 flashing (both 0 and agent lites).have tried to shut it off and main switch and turned it on and off a few times. and still the same


Because the timer controls many operations, a faulty timer can cause many problems. The timer is a complex component, so you shouldn't attempt a do-it-yourself repair. Test the timer with a VOM set to the RX1 scale. To gain access to the timer, ... Bosch Dishwashers

Fills ok wash ok at 156 degrees goes into rinse cycle dont seem to have much water comming out shows 0 degrees rinse temp. screen is out so thats not clogged have separate free standing electric heater piped in has been working fine for 5 years that way dont understand 0 degree water temp. on display any help would be great thanks for your time joe


... Hobart AM14-253 Free-standing Dishwasher

My Prima LPR450 slimline dishwasher has become impossible to programme as it bleeps and flashes at me and will not allow me to set a programme. Up until now it has been perfect. Ihave tried to find a manual /user guide but without success. It might help to know who actually maked prima dishwashers. Thank you


... Dishwashers

I have a Neff s4457n0gb/32 dishwasher that will not complete the cycle as it finishes on 0:01 minutes remaining on rinse and not moving to drying. I have to press the reset to clear the display to 0:00. If you've any idea how I can correct this problem that would be most helpful.


... Neff 24 in. S4457 Built-in Dishwasher

Nothing comes on on my kitchenIaid KUDI24SEBL4.checked door switch(2poles,com and NO3)res was infinite across com and NO3 and 0 when the actuator was depessed.the actuator has to be held down after it clicks to get a 0 resistance otherwise it goes to infinite.is this correct.if so I guess I need to check the timer?


... KitchenAid Dishwashers

This dishwasher caught fire it got to hot and burnt the plactie around the bottom by the element. This modle has been recalled what can I do? GSD2620J01SS AG736720B not sure if the 0 are zero's or the number 0


... GE Tritonr XL GSD6260JCC Dishwasher

Zanussi dishwasher when cycle finished displays .60 instead of 0?


... Dishwashers

How long should a normal wash cycle take for a kitchenaid dishwasher type 577 0


... KitchenAid Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0159 seconds