Having problems with your Whirlpool 24 in. DU1100XTP Built-in Dishwasher ?

Dishwashwer wont fit under counter

\015 I have a rental house and bought a replacement standard dishwasher at Home Depot. GE installation could not fit it in, says its too tall. It could be the flooring with is old hard wood covered with laminate. The shorter dishwashers are MUCH more expensive and hard to find. Couldn't they just remove the legs/feet and make it fit? What are my options?\015

Answers :

It depends on how much tallerit is . you can adjust the legs but you have to know how much. if this helps let me know.
Repair Help & Product Troubleshooting for Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwashwer wont fit under counter


It depends on how much tallerit is . you can adjust the legs but you have to know how much. if this helps let me know. ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Ge dishwasher water disposal hose wont fit


... Dishwashers

Hi my indesit dish washer dvg622 wont heat up. i have had a new element fitted and a new thermostat, it all works OK just wont heat up or dry .. HELP.


... Indesit 23 in. DV62 IX Built-in Dishwasher

Broken dishwasher idl350 dishwasher fitted a new element but it still wont heat the water what coud the problem be. have checked on everything i can think of but it stil wont work. would it be eney broken wires it the door?


IF your dishwasher is a 220 volt unit find and reset BOTH breakers for it. Also make sure someone hasn't inadvertantly hit the"heat dry" button to off. ... Dishwashers

Idl350 dishwasher fitted a new element but it wont heat the water


Check that there is a circuit through the thermostat(over temp thermostat) or there may be a faulty heat sensor on the control board. ... Dishwashers

Can the insulation be removed from the washer. The washer doesn't fit under our counter with the insulation on.


Not advisable. You are putting yourself into risk as well as yourself or the people using it ... Kenmore Dishwashers

Gsd6200g00cc My dishwasher will not drain.. i have pulled the protective mesh off and cleaned around the inside of the drain with my finger.. cannot fit a snake in it to clear it. draino wont work. what to do?


... Dishwashers

Installing model 665 kenmore dishwasher with granit counter top.The side bracket we are trying to use need to be snap of at the line to get dishwasher to fit right.The problem is we cant get to the screw the side of the washer is in the way and no hole is in the side of the washer.Need a real fix.


... Dishwashers

Maytag dishwasher Anyway to convert this model to an adjustable top rack. Wife not happy that taller bottles wont fit on top.


... Dishwashers

I have an older under the counter high temp dish washer not sure the model number but it has the three switches on the lower left, has both upper and lower wands and it is high temp. Not for sure but it seem like the homing cam switch is not working you can manually turn the came to get machine working but when it shuts off it wont restart when you close and latch the door could you please help!


The cam switch may be faulty and may be available for replacement.\015\012\015\012Hard to find replacement without model no. but for the current model it is available ... Moyer Diebel Dishwashers

My kitchenAid dishwasher won't fit under my counter top


... KitchenAid Dishwashers

Got a lound buzz type noise that I thought was a bad solenoid on the water valve. Tub also filled up & overflowed1 Replaced water valve ($30), but now dishwasher wont run thru cycles or fill with water to wash--seems to be stuck on drain even though digital counter counts down. What should I check next?


You may have dislocated the connection that controls the AquaStop circuit.\015\012\015\012This is linked to the inlet hose. Either the connector linking the inlet tap to the inlet valve is loose or the float switch has triggered.\01 ... Bosch 24 in. SHU53 Built-in Dishwasher

My haier compact counter top dishwasher model # HDT18PA turned off mid-cycle and wont turn back on


... Haier Best prices HDT18PA Space Saver Compact Countertop Dishwasher

My kitchenaide dishwasher won't fit under my counter top


... Dishwashers

Kenmore elite dishwasher, less than 1 yr old. Wont drain. I have pressed ''Drain'' on the keypad, motor/pump runs but no drainage. If blocked, where? Can I clear it without having to dismantle and remove from under the counter. I have no manual to reference. Thanks.


Could be blocked in the bottom of dishwash, you may have to remove blockage. or take lose the hose under the sink enter the garbage dis. ... Dishwashers

How do I take the top off of the dishwasher so that it fits under standard counter height?


... Hoover HD95M Free-standing Dishwasher

INSULLATION BLANKET Today I had two KitchenAid dishwashers installed. The installer took the insullation blanket off and told me that it was not necessary. He did this because the dishwashers did not fit under the counter with it on. I bought these dishwasher because if had a 51 Db rating for sound. They are noisy. Is it possible that this wrap around polyester foam like blanket actually helps decrease the sound?


Get his **** back out there. ... Dishwashers

Plumbing issues for under the counter frigidaire mini dishwasher


Your right the one with the rounded end and nut is the intake. It is supposed to be attatched to your faucet. Adapters may be needed. The other is the drain hose, make sure it is attatched firmly, you can't just throw it in sink or BIG mess will foll ... Frigidaire 18 in. FDR252RB Built-in Dishwasher

Replace dishwasher / counter tops are not standard


I have had that problem before and used a saws-al and cut the legs and what ever else i needed to get that puppy out.the question is will your new one fit?in my case most all i ever tried to install i got them in.and i have done a hundre ... Whirlpool Dishwashers

How to mount into counter


There are normally a kit with mounting screws and clips to hold dishwasher in. also you can adjust the lower legs. ... LG LDF6810 Built-in Dishwasher

My DPD 3100 is leaking from a brass fitting on the side of the pump (opposite of the white ??reset?? button. The brass fitting has a star shaped whole in the center. When i remove the fitting, there's a heavy duty spring behind it. Do i need to replace the fitting, or is there another problem? Where do i find parts for this?


First things first, before replacing I would wrap this valve with teflon tape and then retighten and see if the leak stops, I checked the entire schematic and found no listing for a spring so this is part of a valve assembly of some type. It might b ... Dewalt DPD3100 Gas Pressure Washer

My GSD900G-01 dishwasher leaks where the hot water is supposed to go into the tub. There's a plastic fitting that seems to be glued to the side of the tub and the hose from the inlet valve goes to the top of this fitting. There are no visible cracks or other damage but there is some rust inside the tub at the fitting. The fitting has two open gaps on it's side which is where the water is leaking out. It looks like the water is supposed to flow past these gaps (which I'm guessing are there to


Hi, I seen where this posted on premium. If you still need assistance, please let me know. I can help you through this.\015\012\015\012Vic ... Dishwashers

I set up a drip system years ago and now am looking to replace it (old, worn, leaks) but the problem is this-I can't push any fitting (be it connectors, tees, etc) onto the main hose. Both hose and fittings are 1/2''. The fittings in the original system were not near as difficult to use-I also tried hot water (fittings) and ice water (hose), nothing. Is there any size difference between the old and new components?


It's not really a solution-it seems there are two sizes OD (.700", .620") both called 1/2" tubing. The appropriate sized fittings must therefore be used ... Raindrip R333CT Swivel Tee Adapter

I'm having my kitchen counter tops replaced with granite. I have a GE Model GSD700 dishwasher that is now attached to the existing counter top. The granite counter tops will not accept having a dishwasher attached. I need installation instructions for the dishwasher which do not include being attached to the counter top. [email protected]


You can attach a block of wood using silicone adhesive to hold it in place on the underside of the granite top. After the silicone has cured (usually 24 hrs) you can use the same mounting clips as before. Just be sure to use shorter screws than the ... Dishwashers

I purchased a replacement lower dishwasher basket for a DU8500XB-0 Whirlpool. The replacement part is W10311986. The part fits washer as far as rolling in and out, but there are 4 extra parts that I don't know how they fit, no paper work with the part from FSP. Basket probably fits more than one machine. Would like to know how the extra parts fit the basket. Thanks


Did you get a response to your question? I have the same question. ... Whirlpool W10311986 DISHRACK
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0549 seconds