Having problems with your Whirlpool 24 in. DU1100XTP Built-in Dishwasher ?

I have a Hoover dishwasher model D7610 and the springs in the door seem to be broken. The door drops down hard instead of easy. Can I replace the springs myself or do I have to get a repair guy to do it?


Answers :

Repair Help & Product Troubleshooting for Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Hoover dishwasher model D7610 and the springs in the door seem to be broken. The door drops down hard instead of easy. Can I replace the springs myself or do I have to get a repair guy to do it?


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

The opening latch on the amana sofsound II dishwasher came loose. To avoid a service call, I would like to disconnect the door and haul the door to the repair shop. How do I disconnect the door? This same problem has happend before and I tried to replace the opening latch myself but I ended up having to have a guy come out and fix it.


... Amana 24 in. ADB2200AW Built-In Dishwasher

No sanitizer Hi, I've got a 501HT that's acting up, it is not taking up any sanitizer, is it the pump or could the line be clogged? Also, I've noticed the detergent line has never been installed, isn't there a pump for that aswell and shouldn't that be operational. The previous owner never mentioned it? Lastly, I had a service guy out this spring to do some repairs and told me that one of the coils on the booster tank was shot and should be replaced. Should I replace all of the coils or just the


Hello\015\012If you have a 501HT you shouldn't need a sanitizer because the machine sanitizes using hot water. The final rinse temperature should reach 82 C to kill all germs. The chemical pump's element tubes may be worn out. This would preven ... Moyer Diebel 24 in. 501HT Built-in Dishwasher

Hello,I hope you can answer the question below for me. My dishwasher is a Hotpoint model BFI680 - integrated. I want to replace the old interlocking assembly with a new one as the spring has broken and I can not close the dishwasher door. I have trouble removing the old interlocking assembly though. I can not see any screws that keep it into place as with other models. Instead, it looks like that it is "clipped" to the dishwasher door via the two inner side round holes at the bottom. Tried to re


... Hotpoint 23 in. BFI68 Built-in Dishwasher

KITCHEN AID STAINLESS DISHWASHER MODEL #kuds02frssWe just replaced both springs in the door and the latch mechanism and the soap dispenser that still does not work. Our door will not stay shut. MY HUSBAND NEEDS HELP.. PLEASE HELP. HE IS VERY GOOD AT REPAIRS AND IS STUMPED!!


Hi.Your husband must check wiring harness from electronic control to door lock solenoid.The solenoid should also be tested reading Ohms with a multimeter.Here parts and diagrams: ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Washing powder dispenser is not working in Rosiere LVI 255 dishwasher. it would not open during the relevant washing cycle. Also. the spring in door is broken and needs replacement. Can anybody in Australia repair my dishwasher? I live in ACT.


... Dishwashers

Hi Tricity bendix BK205. The door is not supported by I assume a spring mechanism. How easy is it to repair and how do you access Thanks


... Tricity Bendix Dishwashers

This is the second time in 2 years my door to the dishwasher slammed open and hit me in the shins. A spring or something was replaced once ALREADY how do I get this repaired again? I thought buying a kitchen Aid I would not have problems Please help I am afraid someone will get hurt.


Hi,\012That is not that hard to fix and you can easily buy the parts yourselfonline...Here is a tip that will help you with the online buying...How to Buy ... KitchenAid Dishwashers

Frigidaire dishwasher model # FDB635RFS4 possable break of spring for door. How do you repair or replace?


... Dishwashers

How do you repair or replace the door tension spring on a KUDP01FLBT2 built-in Kitchenaid dishwasher? Thanks


Hi, If your door falls down or is noisy I have put together some instructions here on how to repair. You will need a kit part number 8194001, it is relatively inexpensive, let me know if you have questions. ... KitchenAid 24 in. KUDP01FL Built-in Dishwasher

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

KitchenAid KUDI10FL dishwasher- The door spring system broke and I repaired it, but now all of the sudden the dishwasher will not start. The door may have been dropped a couple of time before the spring system was repaired, but it did not hit the floor, just a hard sudden stop. All of the cycle setting lights come on when they are pressed except for the start button. Just before the start button stopped working the dishwasher started by itself or started several hours after cycle selection had b


Hi- It is possible that the door latch is not completely engaging. If the door dropped the hinges may have bent a little thus preventing a good contact with door switch. Try pressing and holding the door shut, hard, and pressing start. If that wor ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

KitchenAid dishwasher model KUDI0FLSS6 replace door spring


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Repair LD-14AT2 door spring


... LG LDF6810ST Stainless Steel Built-in Dishwasher

The detergent dispenser door on my AEG favorit 86070vi will not spring open. I found a small coil spring on the floor and suspect that it was involved with the opening function. For info, the dispenser door fell off a few weeks ago and was replaced by my wife. She can't recall how she did it and I can't see how it can be removed. The spring has one arm approx 10 mm long, the other is about 2 mm and the coil (body) is about 10 mm. Hope you can help


... Dishwashers

Whirlpool DU927QWDG1 Hi, The problem I'm having with my dishwasher pertains to the door cover for the area I place the soap. There is a small spring which helps the door pop open to release the soap when washing. I cant figure out how to place the spring so that the pops open.....right now when I run the unit the door stays latched and the soap doesn't get dispensed. Any ideas on how to repair this or where I could maybe get a parts manual??? Your expertise will be greatly appreciated!!!!


... Whirlpool GU2400XTP Built-in Dishwasher

How do I replace the spring in the soap door? Spring appears to be broken because it is sticking out from the door. Door will not stay shut.


It depends on the breakage. Contact service center and get the part replaced. ... Bosch 24 in. SHU43 Built-in Dishwasher

Dishwasher leaking We bought our dishwasher in Sep/07, it was fine for a year, then started leaking out the bottom of the door on the left. We had the seal on the door replaced (didn't work) and then the door gasket replaced. That worked for less than a year, now it is leaking again in the same place. What could be going on? Have already put $400.00 repairs into this machine and am reluctant to put more money in to have it break again the same way. What do you suggest?


This sounds like a hinge problem to start with.\015\012\015\012Test the seal by dragging a strip of paper through it with door closed. Probably that left hinge isn't holding door close enough which was probably the original cause. As se ... KitchenAid Architect? II S SERIES KUDS03FT Stainless Steel Built-in Dishwasher

Door Springs I need to replace the door springs in my dishwasher how is this done?


Goto http://www.applianceaid.com/lookup.html for directions ... Westinghouse 24 in. MDP531 RF Free-standing Dishwasher

I have a GE dishwasher (purchased in1992) the door falls open I suspect a broken spring. I looked all over the door hinge and cannot locate a spring(s). Where are they located. Also because of the age would I be better off to just replace the washer?


... Maytag Dishwasher

The cable to the door of my GE Potscrubber 900 dish washer (model GSD900L-02) broke. I purchase the replacement cable and now need to know how to reinstall this new cable. The replacement parts include two cables and two springs. Can you provide a "visual" of how this cable connects to the lower left corner of the door???


Question, my cable just broke yesterday. Where did you buy the part? ... Maytag Dishwasher

Amana dishwasher door springs need to be replaced how do i put door springs back into dishwasher


... Dishwashers

My dishwasher (model #110763510) lets water go out from the door; I think the problem comes from the overfill protector because it is no more linked to the system: I can pull it out from the dishwasher. I would like to know if it easy to repair, easy access from under. If so, then I would order the piece and repair it myself. Thanks for your advice. Claude


Hello Claude. Yes. The best place to order parts is Sears Direct. Just go there, enter the model number and you get a great schematic showing every part, screw, etc. J. ... Kenmore Dishwashers

What's the trick replacing broken pin dowel #3372028 with spring #8066018 on door of whirlpool dishwasher #ydu920qwdqo so that spring is cocked to pop open detergent door?


Is the washer door is stuck up, & can't open..?Thanks ... Dishwashers

Model kuds 02frb10 serial # fs4604161 at first use attempt after install door would not latch, unit is in st thomas usvi where there are no kitchaid authorized repair people; local repairman has replaced latch, gasket, and door hinges all to no avail; now he says not repairable and it is junk to throw away; help


Hi\015\012\015\012\015\012\015\012\015\012This is a common problem not only for your type of dishwasher but also with other models. You need to unscrew the screws on the inside of the door. After all the screws are taken out ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0760 seconds