Having problems with your Whirlpool 24 in. DU1100XTP Built-in Dishwasher ?

My Prima LPR 600 shows the fault code of four flashes followed by a pause. Any ideas please?


Answers :

Repair Help & Product Troubleshooting for Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Prima LPR 600 shows the fault code of four flashes followed by a pause. Any ideas please?


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Hi i have a Candy CDI 1012/B Intergrated dishwasher and 4 lights are flashing during the first programme then system drains and stops showing four lights lit. We have no instruction manual or service manual this would be good to get hold of as we have serveral of these machines. any idea what the problem is to save us time investigating it. Thanks Paul


Hi. The four leds flashing quickly at start of the cycle means that there is an inlet problem. Check that the inlet hose is not bent, blocked or kinked, ensure that water has sufficient pressure. The inlet valve can be tested reading Ohms at valve te ... Dishwashers

I have just had a CDA WC430IN Dishwasher installed. I have followed the instruction manual regarding what to do when you first use it. Unfortunately it runs for around a minute then beeps 10 times and has four lights flashing. The trouble shooting guide doesn't show what this means. I have checked that the water is on can you help?.


I would called the people who you bought the dishwasher off of and let them worked on it. There should be at least a 90 days warranty on parts and coverage. ... Dishwashers

Bosch dishwasher SGS45EO2GB/45 does not complete washing cycle. It stays at 1 min left with pump running. I have reset the machine twice at which stage the pump empties the machine and the display shows 0 mins. However, have tried it agin and same problem. Any ideas, please?


... Dishwashers

I have a Whirlpool ADF951, it has power to it and was working fine, the power light is on and the green light to the far right of the cycle lights is flashing, I can only get any response if I hold the start button in for about 10-15 seconds, The machine stops the light flashing and makes the noise like it is starting , that goes for about 20 secs then returns to the flashing light stage, any idea's please


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If the light flashes, pauses, and then repeats. When\015\012the dishwasher doesn't sense a water tempera ... Dishwashers

Miele G894SC Dishwasher. Flashing LEDs on front pannel. Power cycle no help. The following LEDs are flashing. Top Solo,End,Start/Stop. Recycled power, turned on and off via power sw. all to no avail. Leds continue to flash when pwr is restored. Ideas?


... Miele Novotronic Elite G856SCV Elite Built-in Dishwasher

Dishwasher ADP8540 keeps stopping showing four flashes for


... Dishwashers

Whirlpool dishwasher model #DU1100XTPSB wont work and the clean button flashes 7 times and pauses, any idea? I shut the power off to it at the breaker to see if it would reset, didnt work


... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Diplomat dishwasher ADP8112 - stopped mid cycle, full of water, no lights on. Thought on/off switch faulty so fitted a new on. Now when you switch it on, lights 4 and 5 flash, then there's a beep and then flashing lights stop and lights 3 and 5 come on and stay on. Any ideas as to how to fix, please?


... Dishwashers

Green light flashes 11 times pauses then flashes 11 times again any ideas ?


Hello & Welcome to FixYaFlashing green light is reset by pressing two buttons in sequence 3-4 times, to reset your kenmore press these buttons in sequence:High te ... Whirlpool Dishwashers

Our LG 6810 dishwasher has stopped cleaning. After the cycle the dishes are wet and covered in greasy clumps. We ran the test cycle and got the following: 3H/U3 11 22 33 44 55 66 04-2 32 33 0 (inlet valve) 35 36 37 38 23 (Thermistor) 3A 3A (beeped twice and showed 3A) 3A (beeped twice and showed 3A) Any advice you could give me would be appreciated. I have the service manual but have never done any type of dishwasher repair. I'd like to not have to replace this dis


1.) Take racks out of unit.2.) put both of the spray arms in the 12 o'clock position3.) Run the washer,once the washer has started wash cycle,open the door and ensure the spray arms have moved off of the 12 o'clock position. Write down re ... LG LDF6810 Built-in Dishwasher

I have a F2 flashing on the top drawer. My dishwasher is only 2 years old. It started to bip on rinse and F2 was flashing. Also water does not drain when it get to rinse. I have this problem 4 months. I have no idea what's wrong. Will it be covered by the manufacture warranty? Please help. Many Thanks.


The motor has not\015\012been sensed rotating\015\012\003 Foreign object has jammed the rotor\015\012\003 The rotor has failed\015\012\003 The hall sensor has failed (small sensor on the underside of the motor)\015\012\0 ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

Whirlpool APD5550 Dishwasher, cycle does not start, green light on start button flashes 6 times, pauses, flashes 6 times etc. can you please give me some indication what the problem may be. Thanks


... Dishwashers

Hi there, I have a Whirlpool DWF A00, A few mins after I turned it on, it stopped, drained the water and the ON-light started flashing. It flashes twice, pauses for a sec and then repeats. I searched the net, but could only find other dishwashers or other light-codes. Please Help! Thank you Michael


... Whirlpool Dishwashers

Hi Masters! My dishwasher was stopped during the program and the second LED ( from the four ) is flashing. Please send me the ARISTON LS 248 T dishwasher error code list if you could or please give advice for me. Many thanks,


... Dishwashers

I have a Siemens SN25M230GB Dishwasher showing the following: Fault Code E15 Digital display showing (Error) E15 with a flashing 'tap' What does this mean? Is it something that I can fix myself or does it need to be looked at by a professional? Thanks Tina


... Siemens Dishwashers

We have a neff dishwasher with the following alarm flashing -- The Check water supply display (12) flashes rapidly"--meaning water in the safety system. Can you please advise Thanks Tadhg


... Neff Dishwashers

I have a Whirpool D/W Mod. GU2275XTVYO. The clean light flashes 7 timed, pauses and flashes 7 times again... Is that in the board? It will cancel and drain but won't do anything after that. Please help. Pat


Hi If clean light is blinking 7 times then it may be an issue with heater circuit, door switch or wash pump. If yes then please reset the power to the dishwasher. After, 5 minutes check if you are still getting the same error. ... Whirlpool Gold GU2275XTV Builtin Dishwasher

HI, We have a Meiko DV 80.2, with a recurring error code of 204. I changed the booster level switch, and it worked for a while, but is now showing the same error 204. Any ideas Please ?


... Meiko Dishwashers

I have a whirlpool adg 332 and the green light is flashing 4 times any ideas ?


... Whirlpool ADG332 Built-in Dishwasher

Whirlpool ADP5966 Start button keeps flashing machine will not run on any programme any ideas please


Just choose another programme setting and hold the start button in for a few seconds. this should solve the problem ... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

My Indesit dishwasher model no DE73 is showing a flashing light that appears to read A08 and the water in the dishwasher gets to hot filter is clean and salt and rince aid are correct is it the thermostat ? Can you help me me please.


... Dishwashers

Haier diswasher flashing lights and beeping after 10 mins i have tried the lean back to 40degrees and it not sorted it ive checked the float switch thats not blocked etc if anyone has any more ideas please help


I took apart the door fiddled with the micro switch which tell the washer the door is closed looks like the switch was worn so i have place a little paper under the switch to get it to make a better contact until i can find a replacment ... Haier Dishwashers

Leaky dishwasher I have a whirlpool lagan dw 110 w dishwasher. Following a wash cycle today it has leaked water over the floor and the light on the dishwasher was flashing. There seems to be no apparent problems and I can't find the manual ... any ideas?


Check to see from where your dishwasher is leaking. First, wipe off all\015\012the area around and below the dishwasher and then check for the source\015\012of the leak. If the leak is near the door, give the gasket a look. If\015\012the gasket is lo ... Dishwashers

Dishwasher showing Er . Reads as follows: Drying Sensing Er Sanitized Low Clean * Serial # th44076578 model # PLD346ORDCO Professional series Have filled with JetDry but cannot delete Er message. Please advise. Brenda Brammar


ER code, that indicates a keypad switch failure.\015\012\015\012\015\012\015\012\015\012\015\012Below is a DIY self help Dishwasher repair help website.\015\012 ... Frigidaire Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1191 seconds