Having problems with your Whirlpool 24 in. DU1100XTPS Built-in Dishwasher ?

Why thermal fuse is blown - Whirlpool 24 in. DU1100XTPS Built-in Dishwasher


Answers :

If you have no power to your machine and the power is on it is the thermal fuse. If the fuse is blown you will get no power at all. To my understanding after talking to many people the thermal fuse is likely the first thing to go bad on a whirlpool dishwasher. A power surge to your unit would cause the fuse to blow or the control board to go bad.
Repair Help & Product Troubleshooting for Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Why thermal fuse is blown - Whirlpool 24 in. DU1100XTPS Built-in Dishwasher


If you have no power to your machine and the power is on it is the thermal fuse. If the fuse is blown you will get no power at all. To my understanding after talking to many people the thermal fuse is likely the first thing to go bad on a whirlpool d ... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Thermal fuse blown - Whirlpool 24 in. GU3200XTPS Stainless Steel Built-in Dishwasher


... Whirlpool 24 in. GU3200XTPS Stainless Steel Built-in Dishwasher

Whirlpool Dishwasher No Power: GU1200XT dishwasher thermal fuse in power up circuit blew & was replaced about two months ago. It has blown again. Both times it was after wash was finished but water was left in tub. Would appreciate suggestions on what may be causing the hi temp condition and how to verify.


I have a similar problem with my whirpool diswashre GU2500XTPB1. I check thermal fuse (on the board. It is OK (continuty). Right door switch _ OK, Left door switch _ weaker a bit). It still not work) I do not know what to check? ... Whirlpool 24 in. GU1200XT Built-in Dishwasher

Kenmore elite dishwasher blown thermal fuse - Kenmore 24 in. 17372 / 17374 / 17379 Built-in Dishwasher


... Kenmore 24 in. 17372 / 17374 / 17379 Built-in Dishwasher

Kenmore dishwasher thermal fuse - Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher


... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

Whirpool thermal fuse - Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Causes of a blown thermal use and a whirlpool gold dishwasher


Your lint vents in the dryer are clogged.\015\012Your connecting vent on the rear is clogged.\015\012Your through the wall vent is clogged.\015\012Could be any one of these problems or a combination of these.\015\012In any eve ... Dishwashers

I have a Whirlpool DU1055XTSS dishwasher that completely stopped working. I took it apart, found the thermal fuse to be bad, ordered a new, then replaced it and it worked for 2 loads. Now the thermal is open again. What could be "taking it out"? Is the thermal fuse strictly a thermal or does it repsond to current? It's 2 years old, i have already replaced the heating element, the main control board, and now the thermal....twice.


Hi.If the thermal fuse is blowing, that means that there is overheating.Common causes for overheating are:Thermostat cutting off too late.Plugged element.Plugged element means that the element sta ... Whirlpool Dishwashers

My Whirlpool GU2400XTP dishwasher keeps blowing the fuse. It sat up for 6months because the control panel went out and I couldn't afford to get a new one. Finally replaced the panel and the thermal fuse blew during the first wash cycle. I tried to put a 15AMP fuse in it's place to check it out before I bought a new thermal fuse and it too blew during the first cycle. Any ideas?


Are you replacing the wires along with the fuse? It is important to change the wires too as they are usually the cause for the fuse blowing. Be sure and get the fuse kit that includes the wires. \015\012\015\012Is your water too hot? Hot ... Whirlpool GU2400XTP Built-in Dishwasher

I have a Whirlpool DU1055XTSS dishwasher that completely stopped working. I took it apart, found the thermal fuse to be bad, ordered a new, then replaced it and it worked for 2 loads. Now the thermal is open again. What could be "taking it out"? Is the thermal fuse strictly a thermal or does it repsond to current? thanks


Water is getting on the wiring somewhere, take it apart right after a cycle and see if you have a door leak, or the motor is going bad ... Whirlpool DU1055XTS Built-in Dishwasher

I have Whirlpool Quiet Partner III dishwasher, Model number GU2400XTPS3, Serial number FS1820245. I recently had the thermal fuse replaced by an authorized service repair person. My problem is that the dishwasher stops mid-cycle. I noticed that when I try to clean it in the normal cycle, the dishwasher stops with about 46 or 47 minutes remaining, and the green light flashes continuously. I have pressed the Normal and Heated Dry buttons, as well as the Sani Dry and HEated dry buttons to reset the


... Whirlpool GU2400XTP Built-in Dishwasher

Whirlpool Gold Quiet Partner Model # GU980SCGQ2 The dishwasher normal light flashes on and off continually. The dishwasher won't stop cycling now, everything seems to work normally other than it won't stop cycling. I've attempted turning off the breaker- no luck. Attempted resetting the dishwasher- no luck. Any assistance would be appreciated. Is this a problem with the control module? The thermal fuse?


... Whirlpool 24 in. GU980SCG Built-in Dishwasher

I have Whirlpool Quiet Partner III dishwasher, Model number GU2400XTPS3, Serial number FS1820245. I recently had the thermal fuse replaced by an authorized service repair person. My problem is that the dishwasher stops mid-cycle. I noticed that when I try to clean it in the normal cycle, the dishwasher stops with about 46 or 47 minutes remaining, and the green light flashes continuously. I have pressed the Normal and Heated Dry buttons, as well as the Sani Dry and HEated dry buttons to res


... Whirlpool 24 in. ADG7540 Built-in Dishwasher

We have a Whirlpool DU943PWKT0 dishwasher which continues to blow the 'thermal fuse' periodically.


... Whirlpool DU943PWK - Multiple Color Built-in Dishwasher

Whirlpool Dishwaser Model #DU8000XX5. Dishwasher won't do anything. Almost as if not getting any power. Was told to check thermal fuse. Noticed some burning around suspected fuse. Ordered new one, but new one doesn't look like old one. Old has 4 connections, new one only has 2. What gives?


... Dishwashers

I have a whirlpool dishwasher model# du943pwkqo. What wires go to the thermal fuse? I lost power to it and took it apart to check the fuse and there are no wires hooked up to it. Does any one have a wiring diagram?


It is a black wire from the door switch.. hope it helps the tech sheet \015\012\015\012http://www.servicematters.com/docs/w ... Dishwashers

Testing thermal fuse on dishwasher - Whirlpool Dishwashers


... Whirlpool Dishwashers

Bypass thermocouple fuse - Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Replacing thermal fuse on whirlpool oven - Whirlpool WDT910SAYE Gold Series Dishwasher with PowerScour Option - B


... Whirlpool WDT910SAYE Gold Series Dishwasher with PowerScour Option - B

I want block diagram of automatic dishwasher - Whirlpool 24 in. DU1100XTPS Built-in Dishwasher


... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Whirlpool GU1500XTKT0 dishwasher has a Rinse only led blinking. No functions are responding on the control panel. Keyswitch resistance check table on Whirlpool Service Technician's Tech Sheet checks good with digital multimeter. Door switches and thermal fuse near control module check good.


If your keypad tests, door switches, and thermal fuse are all good, the only test left is to make sure you are getting 120 volts at your control board. Test for 120 volts at terminals p8 and p7, and at p2-6 and p7. You will have to activate the doo ... Dishwashers

No power to dishwasher - Whirlpool 24 in. DU1100XTPS Built-in Dishwasher


Check to see if your dishwasher has power going to it. If you confirm the power supply is good you likely have a bad fuse. Go to the link if you want to download a video so that you can see how to access and replace the fuse. ... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

My du943 dishwasher will not power on....it looks like it lost power after the dishes were washed and before the water drained. The fuse is not blown, the power box underneath the unit appears ok, and I checked the thermal fuse after reading other posts with the same problem. What to do from here?


... Whirlpool 24 in. DU930PWP Built-in Dishwasher

Whirlpool DU1055XTSS dishwasher is totally dead as if it were unplugged. No response from front lights. Only 3 years old. Another post for an different Whirlpool model says it's the thermal fuse, but I cant find that part for this model.


Hi,If you have power going to the dishwasher, meaning the breaker, switches, wiring and fuses in the home are okay, the most common cause for your symptoms is the thermal fuse. The thermal fuse is a small disk shaped device th ... Whirlpool DU1055XTS Built-in Dishwasher

How to test dishwasher thermal fuse - KitchenAid 24 in. KUDP01FL Built-in Dishwasher


... KitchenAid 24 in. KUDP01FL Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2215 seconds