Having problems with your Whirlpool 24 in. DU1100XTPS Built-in Dishwasher ?

There is a green light on with padlock next to it

\015 What reason could there be for the controls of the dishwasher to be locked out? This dishwasher was just installed by my father who has no clue what he is doing. It has never run before, so I don't know what could be wrong with it.\015

Answers :

My whirlpool dishwasher control is locked. I tried hitting several button and the light went out. I turned the dishwasher on. It filled with water and then stopped with the controls locked button flashing again. Does anyone have any solutions? If I don't figure this out soon I will be back to washing dishes.
\015\012Thanks
Try holding the "heated dry" button for 3-4 seconds. It may be that the "child-proof" lock is on.
Repair Help & Product Troubleshooting for Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

There is a green light on with padlock next to it


My whirlpool dishwasher control is locked. I tried hitting several button and the light went out. I turned the dishwasher on. It filled with water and then stopped with the controls locked button flashing again. Does anyone have any solutions? If I d ... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Dishwasher Normally, after the dishwasher cleans the load, it displays green light next to clean. Once the door is opened, the light goes off an dishwasher is ready for next load. But from few days, after opening the dishwasher door, the clean light does not go off, it remains lit. Dishwasher doe snot reset for next cycle. So, I have to go in the basement and trip the main power to dishwasher. That resets the dishwasher. This needs to be done before each cycle. Not sure how to resolve the issue.


Make sure that you do not open the door during the wash cycle. Wait until all the cycles \015\012are complete before opening the door. Especially don't open the door \015\012during the drying cycle. ... Dishwashers

Kudm01fkss0 not running, initially the green light next to rinse flashes in the middle of the cycle. I clicked on cancel to drain. I ran the test cycle and the light next to normal was lit when done but it still will not run a cycle.


... KitchenAid Dishwashers

Model KUDS30FXSSO, Unit attempts to start. Blue light on the front of the door comes on indicating the cycle is starting. Pump runs a few seconds as normal. Then the maching sounds like it trying to start the next step three or four times. The blue light goes out. The washing cycle then switches to cancel/drain, ( I opened the door to see which control lights were on.) runs the drain pump then stops. The green light on the front panel does not come on indicating the cycle was completed.


... KitchenAid 24 in. KUDP01FL Built-in Dishwasher

I have a Whirlpool Gu180 ESJQ with a blinking green start light. If I clear this light (hold the start button for 5 second to place it in the end of cycle) then I can get it to start another wash cycle. However, the next wash cycle ends with a blinking start button again and the dishes aren't dry. I had an appliance service man come to check it out and he could not detect any problem! Now I have a leak!


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Maytag quiet series 100; won't start, there is a green light to the left of the number 3 next to the heated drying option. When I select a washing cycle the light just blinks, is it locked- adult proof or something?


... Dishwashers

Our GE Triton Dishwasher, mod# GSD5620D01BB is 10 years old. A problem started two days ago where; when it runs through a normal washing cycle; it contuously beeps about every 1 second when it reaches the Drying Cycle and the LED Green light flashes next to the Drying . I reset the breaker and tried again; same thing happened as it went through the normal cycle and when it reached the Drying part; same thing happened. The dishwasher is cleaning and everything else seems to be working fine.


The drying fan and vent system seems faulty.\015\012\015\012Refer this diagram. Item 918. ... Dishwashers

I have this model dishwasher and last year I spent close to $300.00 having this control panel replaced and as soon as the warranty went p it stopped working again, but there is a green light that blinks next to right side where it says clean. It seems like it is blinking in sequence.. I cannot afford to spend this kind of money to have this fixed again. The co. that has the contract with kitchenaid is horrible and do not double check their work. The only thing tey care about is the bck.


Sorry to hear about the trouble with service. I have put together a sheet to show why the clean light blinks and how to reset the control so you can use it. Let me know if you have questions I would be happy to assist. Here is the link to the instruc ... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

I have a Quiet Partner II dishwasher. The clean button is blinking with a green light. When I try to start is over, nothing happens. When I push the cancel/drain button, I hear something happening for maybe a minute, then it reverts back to the clean button blinking and won't take any other commands. What should I try next?


... Kenmore 24 in. 16222 Built-in Dishwasher

We can't get it to cycle.... the green light next to 'clean' is flashing on the panel - can't get it to stop flashing and run??


Found it; High temp scrub--Energy saver dry---High temp scrub---Energy saver dry--press start, close door ,wait for it to reset,open door press cancel and you are ready to go. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a maytag quiet series 300 dishwasher. On the control panel there is a green light on next to a picture of what appears to be a lock with a number 3 in the middle of it. I am not able to use my dishwasher because of this problem. How do I fix this issue?


Hold down the heated dry button for 3 seconds until the light goes off. This should take care of that problem. ... Maytag Dishwasher

I have a maytag quiet series 300 dishwasher. On the control panel there is a green light on next to a picture of what appears to be a lock with a number 3 in the middle of it. I am not able to use my dishwasher because of this problem. How do I fix this issue?


Press and hold the heated dry button 3 seconds it will unlock the dishwasher. That 3 with the lock around it show you that the dishwasher has been locked out to keep buttons from being able to be pushed. You can lock it and unlock it by holding ... Maytag Dishwashers

I have a maytag dishwasher model mdbh955aws. the light under the option panel that is next to a symbol the appear to be a 3 stay on green.


... Maytag MDBH955AWS Stainless Steel 24 in. Built-in Dishwasher

I have a Eurotech Model EDW242C, I can't get the "on" light to turn green, the program light is green, and the start light is solid green but the "on" light stays red and the dishwasher will not start. My cell is 404-229


If the start light is red from start, and there is no water inside the machine , then it can be an inlet error.Trip first the circuit breaker to reset the appliance.Check the inlet hose and ensure there is pressure. ... EuroTech Dishwashers

I have a kenmore DW model 16019. The clean Light stays on the light does not turn off. I have tried to disconnect and have taken the motort apart to make sure everything is clean. What Can I do to solve this problem? 1. Does the washer work at all? No it does not work 2. Does it display any codes or flashing lights other than the CLEAN LIGHT being lit? no other lights are on except for the green blinking light 3. Is the light solid or blinking? blinking Green light 4. Entire model # is necessary


Thanks for re-posting with all the info!!The model # is 665.16019403The cleaning light blinking is a fault code listed in the tech. service sheet, its usually a faulty heating circuit.The sheet can be found behind the ki ... Kenmore Dishwashers

Ran dishwasher overnight came downstairs this morning and instead of a steady green light indicating the dishes are clean, i see a flashing green light indicating dishes are not sanitized. how do you get rid of green light.


Hi.If the dishwasher is not sanitizin that means that the machine does not detect that the water temperature required for sanitizing (120) is reached.I do not have make an model info. Most appliances will reset simply by tripp ... Dishwashers

The third green light (where the three green lights light up and red) flashes. The dishwasher will not start. When you press start it just flashes green.


... Electrolux Kenmore 24 in. Built-In Dishwasher with 5-level Precision Direct Water Delivery System Dishwasher

Hi i dont know the model of the dishwasher.. but the controls are fairly staright forward... a little knob for temperatur control and an on/off button.. and a light that lights up green when dishwasher is switched on... now the problem is as happened recently, when you switch the washer on greenlight is on and washer can be heard doing something but after a minuit or so the washer stops and the green light flashes. open up the dishwasher no sign of water or that it has done anything at all... th


It sounds like your washer is not getting enough water to start. If your washing machine is filling too slowly or not at all, then you probably have a clogged screen on the back of your washer. To check this: \015\012\015\012 ... Whirlpool Dishwashers

I have a diplomat ADP 8342 slimline dishwasher which has just stopped working,the green on light comes on but the programme buttons won't,however if you turn the green light off and then press the programme button they beep and the red light shows briefly.


... Hotpoint Dishwashers

My dishwasher, a Whirlpool ADP 931, has stopped working. Possibly because the door was opened during operation, right after it was started. There is some kind of error condition indicated through a blinking Start light, but I don't know how to analyze this. This is a quite simple model with very few buttons to press. When I turn the program knob right to start it, the only thing that happens is that the green Start lights begins to blink continuously. There is also another green light


Hello & Welcome to FixYaThis light is reset by pressing two buttons in sequence 3-4 times, to reset your dishwasher press these buttons in sequence:High tem ... Dishwashers

We've got Beko DE 2542 FW Slimline dishwasher. Everything switches on as it is supposed to but nothing happens. Rinse aid and Salt indicator red light is not on, because we've filled them up. Switched on dishwasher, green light for "On" comes on. Selected programme level, pressed start. Green light comes on for "Wash" Nothing happens - we've left it overnight but nothing happens. What seems to be the problem? Look forward to hearing the solution.


... Beko DE2541FW 18 in. Portable Dishwasher

The third light (where the three green lights light up and red) flashes. The dishwasher will not start. When you press start it just flashes green.


Either the door switch may not be making proper contact will you shut the door or the float switch at the base is stuck making the dishwasher believe it is flooded and should not take anymore water. But generally the drain motor should also start in ... Electrolux Kenmore 24 in. Built-In Dishwasher with 5-level Precision Direct Water Delivery System Dishwasher

First 2 weeks ago i put an electric control module into the upper section. what comes on is the green flashing light for clean. in checking connections i found the paper for trouble shouting. i did what they said to do. they said hit the time saver - high temp - time saver - high temp. from there all the lights went on & the wash cycle started and ran. then it just stopped & the green light for clean just flashes. the water is still in the bottom & won't drain.


The error indicates that the machine has taken too long to drain the water. Do the following.\015\012 \015\012\015\012Switch off the machine, unplug or disconnect the ma ... Kenmore 16874 Built-in Dishwasher

I have a Kenmore Quiet Guard Ultra Wash and the lights on control panel are blinking green. It's the Smart Wash, Normal Wash and Light Wash lights that are blinking green. Dishwasher won't sta


... Dishwashers

Dishwasher won't start. Green light beside 'Clean' flashes repeat


I checked the whirlpool tech line on this it said call for service check heating circet check your warrenty for 2-5th year warrenties some parts like control bd touch pads are under extended but youll have to use a kenmore autherized tech sorry ... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0974 seconds