Having problems with your Whirlpool 24 in. DU1148XTP Built-in Dishwasher ?

I have a whirlpool had a tech come out to look at it, it needs a fuse. he said it will be $65 but i found the same part online for $17. is this guy ripping me off?? ps the part # is W10258275 it is a Whirlpool DU1148XTPBA.


Answers :

I found the same part listed at pcappliancerepair.com for about $15.
\012
\012You have to remember that repair technician fees include the diagnostic charge (diagnoses of your problem), the labor charge (to install the part - which is usually a set fee set by the company they work for) and the cost of the part. $65 dollars for a COMPLETE repair job is not a bad price. However, if he is charging you $65 for just the bi-metal (fuse), then you would be better off ordering the part and installing it yourself. This is not a difficult repair and can be accompished by any do-it-yourselfer with a little guidance.
\012
\012If you need further assistance, please post back and let me know. I hope this helps you.
Repair Help & Product Troubleshooting for Whirlpool 24 in. DU1148XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a whirlpool had a tech come out to look at it, it needs a fuse. he said it will be $65 but i found the same part online for $17. is this guy ripping me off?? ps the part # is W10258275 it is a Whirlpool DU1148XTPBA.


Did he say it would be $65 for the fuse or for the fuse and labor?\015\012\015\012If he's charging $65 for just the fuse then he's ripping you off. If his quote includes labor, then it's a fair price as the tech will have made 2 visits to ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

I have a whirlpool had a tech come out to look at it, it needs a fuse. he said it will be $65 but i found the same part online for $17. is this guy ripping me off?? ps the part # is W10258275 it is a Whirlpool DU1148XTPBA.


I found the same part listed at pcappliancerepair.com for about $15. \012\012You have to remember that repair technician fees include the diagnostic charge (diagnoses of your problem), the labor charge (to install the part - which is usu ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

I have a Whirlpool Dishwasher, I had a problem with the garbage disposal, so it was replaced, I hurt myself at the time and my wife had someone install the Garbage Disposal and now you run the dishwasher and no water is brought in to the dishwasher. It does drain, because I put water in and ran that part of the cycle and drained, it does turn on, it does dry but not bring in water is there something basic the guy forgot to do? Any suggestions, thank you.


He turned the hot water faucet under the sink for the dishwasher ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Whirlpool GU1500 XTLS Dishwasher, need control panel part number


Just go to this site and you will find the part you are looking for.\015\012 http://tiny.cc/z5Sy6 ... Dishwashers

Are the top rack adjusters on the Whirlpool GU2400XTP dishwasher an owner-serviceable item? Do most Whirlpool parts stores sell the top rack adjusters for the Adjustable 2-position top rack? My dishwasher is five years old and one of the adjusters has broken. The two-position rack seems like a good idea but the plastic part doesn't look like it was built for high-temperature durability.


... Whirlpool GU2400XTP Built-in Dishwasher

I purchased a replacement lower dishwasher basket for a DU8500XB-0 Whirlpool. The replacement part is W10311986. The part fits washer as far as rolling in and out, but there are 4 extra parts that I don't know how they fit, no paper work with the part from FSP. Basket probably fits more than one machine. Would like to know how the extra parts fit the basket. Thanks


Did you get a response to your question? I have the same question. ... Whirlpool W10311986 DISHRACK

Just need a part number, I have a CA-2003-HDHB pressure washer and I need the part number for the valve kit. also if you could direct me to where I might find a parts breakdown online for my machine, in case I need more part numbers. Thank you. Joe G.


... Mi T M Pressure Washers

Bosch dishwashers I have 2 in my kitchen. 10 years old. BOTH have broken part on the top rack of the rolling part. Can I order the parts online? Thank-you.


Yes . you can go to thermador .com and order these parts.they will send them to you 2-7days ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

Looking for manual for honda pressure washer,its a GX 340 11.0 HP that I can view online without buying so I can find the part and part number


Go to this page: \015\012\015\012http://www.jackssmallengines.com/help.cfm\015\012\015\012You must have your exact engine model number lis ... Honda Pressure Washer PSI 3000

Need a part #8564929 which is the plastic rinse aid knob that fell off during a cycle and melted. kitchenaid wants $37.76 with tax and shipping for this this little plasticpart. rip off. anyone know where i can get a better deal for this part? the model # is KUDS02FRSS1 (stainless Stell) kitchen Aid dishwasher.


... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

I have a CDA CW494 dishwasher, which is a rebadged Whirlpool. The pump has been changed by a service engineer, using a Whirlpool part instead of the original, apparently it is superior. It seemed to work OK, but now the main jets only squirt for a short burst when the motor stops or starts. The rest of the time the motor can be heard running, but no water comes from the jets. Could the motor be running in reverse?


I would check to see if there is any blockage in the area of the dishwasher where the water collects to be recirculated through the pump back into the washer. It sounds as though the water isn't being allowed into the pump enough to continue the was ... Dishwashers

Hi, I need a parts and service manual for a dd603 fisher & Paykel dishwasher. Also can I buy parts at the right price online? Thank you Colin


Http://kitchen.manualsonline.com/manuals/mfg/fisher_paykel/dd603h.html ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

Im replacing a frigidaire with a whirlpool and the problem I'm having is the electrical connections. My old Dw had two elec cords running to it. One small one that runs in the same direction as the drain and water hose runs the other is a slightly bigger elec cord that runs straight out the back of the cabinet unit and I cant tell where it goes. But it has on it anaconda w dutrax type nm 12/2 with grounding 600 volts.Do I need both elec cords for the new whirlpool or just one? All the online vid


Hello. Older houses offer all kinds of challenges. In the long run though, that is part of the joy of life. \015\012\015\012You need three things to hook up a typical dishwasher:\015\0121. The hot water source which goes to fee ... Dishwashers

Whirlpool DU1055XTSS dishwasher is totally dead as if it were unplugged. No response from front lights. Only 3 years old. Another post for an different Whirlpool model says it's the thermal fuse, but I cant find that part for this model.


Hi,If you have power going to the dishwasher, meaning the breaker, switches, wiring and fuses in the home are okay, the most common cause for your symptoms is the thermal fuse. The thermal fuse is a small disk shaped device th ... Whirlpool DU1055XTS Built-in Dishwasher

The top spray arm of my Frigidare model FBD4315LFC0 Aqua Surge dishwasher fell off. Their appears to be a missing part. I've been searching online for a schematic and can't find one thorough enough to use. The parts I have are: 1. The top sprayer arm (the one in the top of the tub) 2. The two piece plastic keeper ring that appears to fit into the top of the spray arm. 3. A small white grommet looking item that fit inside the keeper nut. 4. The keeper nut that screws directly onto the wate


Hello there:hey sorry i keep getting disconnected i will be back on really soon i need to find out what is going on i hope these things that i have discussed with you is helping you out the parts are not as hard as they look once yo ... Frigidaire 24 in. FDB435RFR Built-in Dishwasher

I have a Whirlpool Model DU943PWKQ0 dishwasher. Several of the controls on the front panel no longer work, ie normal wash, cnacel and drain, etc. Others like heavy duty wash work perfectly. It appears the most used are what is not functioning. My question is should I replace the Microcomputer assembly part number 8530929 or the Console (with overlay) part number 8274732. Can you help as I cannot really afford both!


... Dishwashers

Regarding the Whirlpool DU960PWKQ1 little white balls, where exactly are they placed? are they just dropped in randomly into the receptacle on part no 23, per pump and motor parts diagram?


... Dishwashers

Whirlpool DU900,09,10,11,15,20,30,DUL100 Hi, I'm not sure what exact model mine is, but those are the models listed on the manual. I opened the washer and the whole upper part of the wash tower was laying on the dishes! I took everything out, and began trying to think logically, and re-assemble the thing; nothing appears to be broken. page 17 of the manual is the only place that even shows this set up, but it's just a part description. As I am looking at the picture, I realize that the spray tow


... Whirlpool 24 in. DU920PW Built-In Dishwasher

I have a component in the bottom front part of the Miele G542 dishwasher that is leaking water. Its connected to the water IN line. Plumber came out, showed me that I need a dishwasher repair guy to replace the part. Who can I get to make a service call and repair this in San Jose CA.


\015\012Advantage Appliance Repair\015\012\015\012(408) 266-9560\015\012Highly recommended. ... Miele Dishwashers

My model # on my whirlpool dishwasher is du920gwdg4 and all of the parts outlets say it is wrong.The searial # is fg16333950 and stock # isdu920gw.how can I get parts?


... Whirlpool Dishwashers

Have Whirlpool dishwasher Gold Series, Model GU9805CGB1 which stops part way through wash cycle with the led indicator blinks on the normal cycle.....if we ope nthe door and shut ...it continues until part way through rinse cycle...stops again....led indicator blinks again.....we open the door & shut and it continues....but then continues to run through the normal wash cycle continuously.....until we open the door again.....what's wrong???


Sounds like the door is losing contact with the door switch, first thing i would check is the door strike.Metal strike plate located on the tub itself that the door latch catches as it closes. its a spring metal striker, i would try bending it down ... Dishwashers

I have a Kenmore Ultra Dishwasher. Model # 665 or 655. 15895791. A peice fell off the upper middle area. Its round and has 2 concave areas on it. It looks loke it might spin and distribute water. Ive tried to put it back on, but there must be a part missing. Ihave looked and looked online for this part but have not found it. Also I am even having a hard time with the model #. Ive checked it several times to see if I read it wrong. Thanks in advace.


... Kenmore Dishwashers

I have a three year old Whirlpool Dishwasher DU1148XTP which is making a load flickering noise when it release the soap during the wash cycle. I removed the front panel and looks like it small solinoid that had a part number 91127.00.1404504 120V 60Hz making all the racket. So my question is could it be as simple as just replacing this part or is there more to this problem?


Yes due to voltage fluctuation you need to change the fuse..... ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

We just purchased a whirlpool dishwasher & while taking it out of the box I noticed a gray piece in the lower back with a red electrical part in the middle with a wire connected hanging down. I looked up the part number to find out it was an actuator. The little black plunger was broke. What does this actuator do & what should I do about it?


You just got it. call for service or take it back for a replacement. If that piece was damaged, what else was jarred and soon to fail. I would return it for a replacement.Eric ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Dishwasher stench It's BAD. I had the dishwasher guy out - there's nothing in the filter. He said everything was fine - run shome dishwasher cleaner thru it. We tried that - no good. I looked online and saw there should be a loop in the hose (there was not). I got that taken care of. That guy said run some bleach thru it after and we'd be fine. I did. Still stniks. It's okay right after we run it, but gets skanky in about 2 days after running. I had another plumber today for something else. he s


You might have luck with some enzime cleaners,some washing liquid comes with it,have you tried bakeing soda? the in side is made of plastic . ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0588 seconds