Having problems with your Whirlpool 24 in. DU930PWP Built-in Dishwasher ?

My dishwasher did not come with power cord. what kind of cord do it need and how do i connect the cord? On the new cord how will i know which one to connect to the white and black wire? The dishwasher is Whirlpool model du930pwsb, Sku numbmer 451-5344.


Answers :

120 Volt 16 gauge, 3 wire power cord.
\015\012
\015\012Brass Screw is Black, White Screw is is Common, Green is Ground....Try Home Deport for a cord. If no screws are on the dishwasher, use wire nuts and elec. tape
Repair Help & Product Troubleshooting for Whirlpool 24 in. DU930PWP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher did not come with power cord. what kind of cord do it need and how do i connect the cord? On the new cord how will i know which one to connect to the white and black wire? The dishwasher is Whirlpool model du930pwsb, Sku numbmer 451-5344.


120 Volt 16 gauge, 3 wire power cord.\015\012\015\012Brass Screw is Black, White Screw is is Common, Green is Ground....Try Home Deport for a cord. If no screws are on the dishwasher, use wire nuts and elec. tape ... Whirlpool 24 in. DU930PWP Built-in Dishwasher

We need to connect it back to the built in wires in the dishwasher. We need to know what colours or wires connect to the flat gold metal plates, there is a black plastic case that slips on and then 3 plates underneath and on the top, but not quite sure if that is correct. Then there is still wires that are loose that need connecting. Part NO. C00059727 Copreci - Merloni 1 160010266 TD02 0008


... Dishwashers

I have a new switch for electrolux dishwasher numbered 1 to 6 and need to know which wires connect to it I have 2 black (bulb) single brown, single blue, double blue single black which wires goto which number on the switch ?


... Electrolux 23 in. ESI602 Free-standing Dishwasher

Kenmore Elite dishwasher won't finish cycle. I have the same model, problem, symptoms, and fault codes as in thread: http://www.fixya.com/support/t7120066-kenmore_elite Model: 630.16303401 Fault code: H The water at the faucet is hot: 120F I pulled the control board and all the solder joints looked good--there were no signs of burnt solder joints, missing solder, cold solder, etc I measured the current on the grey-black wire at less than 1 (one) amp when the t-shoot says it should


Hello\015\012& Welcome to FixYa\015\012\015\012If\015\012the water inlet valve is fine then it can be a shorted wire or the heating\015\012element itself that is bad and needs replacement. Please get back to me if you\0 ... Dishwashers

I wired a ge dishwasher ..white to white and black to black. the ground..green wire a screwd to the dishwasher.. turn it on and everything worked ok til the pump came on and the the black to black connection overheadt and starte a fire.... what did i do wrong...note my house wire has only white and black...thanks


Well, hard to say at this point. Your wiring sounds correct, but there may be some other stuff going on which you may have not anticipated. First off, what size breker is attached to the wires you connected to the machine. Most household machine requ ... Dishwashers

My LG Dishwasher LDF7932ST has White, Black and Green wires coming out of the unit, no problem there, however the ALL Grey Cord that was in a separate bag does not help me identify which wire is white and which wire is the black, I can only see that the green wire is in the middle of the three attached to the grey cord as I can just see a little bit of green, how am I suppose to know which ones are the other two? I tried pullilng back the grey rubberized cord to see if it was show me ... but no


Hi,\015\012\015\012There is a simple way to tell is to look at the plug end of the cord...\015\012The blades on the plug will be two different sizes...\015\012The blade that is the larger of the two will be the white wire... ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

We just purchased a whirlpool dishwasher & while taking it out of the box I noticed a gray piece in the lower back with a red electrical part in the middle with a wire connected hanging down. I looked up the part number to find out it was an actuator. The little black plunger was broke. What does this actuator do & what should I do about it?


You just got it. call for service or take it back for a replacement. If that piece was damaged, what else was jarred and soon to fail. I would return it for a replacement.Eric ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

I'm attempting to reuse a Maytag dishwasher motor for a bench grinder. Since this is a reversible motor, I'm not sure how to connect the wiring to a simple switch so that it works in one direction only. The motor has 4 wires: blue, gray, red, yellow. Not sure which to connect to the hot (black), return (white) and ground (bare) wires from the romex and can't find a wiring diagram online for this dishwasher. Any ideas? Thanks.


... Hobart 29 in. AM15-1 Free-Standing Dishwasher

KitchenAid dishwasher Hi I have kitchen aid kds 20 dishwasher around 25 years old it has a broken motor and I was trying to put a new motor in it,the old motor has 3 wires white,black and ground but no extra startrelay. the new motor (partno: 4171686 from whirlpool) has 4 wires white,black , yellow and ground , also in package was startrelay but no wiring info for this motor. I Need wiring info if someone can help. Regards. Bjorgvinj


... KitchenAid Dishwashers

I am installing a Kenmore dishwasher model 13743. I have direct wired the washer?s terminal box wires to the wall power via a BX wire and the washer doesn?t respond. None of the panel buttons are active. With a multimeter, I find that there is voltage on the wall wires and on the dishwasher end of the BX cable wires that hard wired to the wall current. Even though, when I connect the dishwasher?s terminal box wires to the BX wires as directed in the Installation Instructions (white to white,


Next step to check the door switch...the door must close and the switches on the door must close to send power to the control...let me know ... Dishwashers

Need to know how replace a 3 prong plug on my dishwasher model # fdb1050rem0 frigidaire dishwasher the wires on dishwasher are white,black,red wires on 3 prong are green an 2 white wires


On libnk below tells you how to change the plug. Step 8\015\012\015\012http://manuals.frigidaire.com/prodinfo_pdf/Kinston/15442730 ... Frigidaire Dishwashers

I would like to purchase a Moyer Diebel U/C dishwasher for residential use. I have the option of purchasing a used dishwasher - it could be one of three models. Which one is the model he is trying to sell to me? 1. 501 HT 2. 501 HTN 3. 501 LT the owner states the voltage is 120/208-240 and heats between 150 f and 180f.He notes there is a 4 ft. cord at the back without a plug on the end of it but the model is rubbed off of the serial number tag.There are three switches on the lower right hand co


The way you mentioned the unit have a 4 ft. cord at the back seem like a 50l LT the best way to determent is open up the bottom plate and see whether there is a booster tank in the right hand side. \015\012Hope this can help you. ... Moyer Diebel 24 in. 501HT Built-in Dishwasher

Model ffb2409ls dishwasher just installed will not come on wired black to black n white to white grounded green wire


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

How to clean black residue out of the filter, dishes and drain hose in my Whirlpool dishwasher. Model No. DU810SWLUO, Type No. 280-0. How to prevent black residue from building up in the dishwasher.


There are could be several reasons for the black residue you mention.\015\012\015\012Not sure of the age of the dishwasher, but most common could be the quality of water used or if aluminium dishes are washed. \015\012\015\012 ... Dishwashers

I have a 5 year old GE Dishwasher Model Number PDW9880JSS which needs to be replaced. What type of electrical connection does this unit have? Is it a standard USA plug type or does this unit require hard wiring? Reason I ask: I want to replace with a dishwasher using the same electrical connection type.


Hi\015\012\015\012Electrical connection is on right side of dishwasher. This dishwasher should have a 3-prong grounding type receptacle in the rear wall of sink cabinet next to the dishwasher. The receptacle should be installed at least 6 ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

HI. Trying to install a LDF6920ST Dishwasher. Question about the wiring. The wires coming out of the machine are Black, Green with a yellowish stripe and White (the white one has a label attached to it with a "N" on it). The plug wires are 3 side-by-side. They are gray, green and gray. Which wires do I connect with which wires?.


... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

Whirlpool Dishwasher model DU930 stopped before cycle completed. There is still some water in the bottom. Dishwasher will not restart. Touch panel is dead, as if there is no electric. I checked the incoming wires and there is electric being supplied to the dishwasher. Any suggestions? Thanks.


... Dishwashers

I have a whirlpool dishwasher model# du943pwkqo. What wires go to the thermal fuse? I lost power to it and took it apart to check the fuse and there are no wires hooked up to it. Does any one have a wiring diagram?


It is a black wire from the door switch.. hope it helps the tech sheet \015\012\015\012http://www.servicematters.com/docs/w ... Dishwashers

My Ge triton xl dishwasher, model PDW739n00ss has a green wire with a yellow stripe that is not connected to anything. It is laying on the floor. I cannot find the wiring diagram. Where should this wire be attached?


... GE PDW7380NSS Stainless Steel Dishwasher

Trying to wire cord to asko dishwasher, model D5424


... Asko D1976 Built-in Dishwasher

Frigidaire dishwasher model# fdb641rab1 Door latch wiring diagram


... Frigidaire FDB641RA Built-in Dishwasher

Whirlpool dishwasher, model DU1050XTPQ1, type 575-0; problem: showing no sign of power to unit and bottom of dishwasher is full of water---it apparently stopped during cycle. Is there a reset button? I have tried depressing the front panel "lock" button for five to ten seconds to unlock the system with no luck. The washer is hard wired to the home electrical system. What should be my next course of action? Thanks


... Whirlpool 24 in. DU1050SS Built-in Dishwasher

The power cord in my install kit for the Kenmore 1344 dishwasher, isnt color coded. The power cord is 3 leads of course but the manual says nothing about which lead to connect to the color coded wires coming from the DW. halp?


It does not matter what lead goes to the white or the black. You just need to make sure that you have the ground in the right place. If it is a flat cord then the center wire is the ground and if it really matters the lead on the right of the ground ... Kenmore Dishwashers

Dishwasher doesn't seem to be cleaning very well. Washtower is just sitting in place - should this be connected?. I found a pices of stainless steel wire in the bottom of the dishwasher - what was this ? How can i tell if washtower is functioning properly? Model GSD5630


Where do i start?first you tell me its not cleaning very well then you say, does it need connected im really confused.If its not connected then it will not work at all,the first thing is to get someone to check it becaues it should be pluged in and p ... GE 24 in. GSD530X Built-in Dishwasher

There are cut wires and no cord for the second hand dishwasher i purchased and I need to find out what wires I am connecting and where


There should be a small junction box under the dishwasher behind the front toe panel. There should be three wires:\015\012\015\012BLACK - HOT (120VAC)\015\012WHITE - NEUTRAL (0 VAC)\015\012GREEN - GROUND\015\012\0 ... Maytag 24 in. MDB5601AWS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2623 seconds