Having problems with your Whirlpool 24 in. DU948PWPQ Built-in Dishwasher ?

Will not start - Whirlpool 24 in. DU948PWPQ Built-in Dishwasher


Answers :

Check the switch, fuse,power contactor, the timer or electronic control board if available.
Repair Help & Product Troubleshooting for Whirlpool 24 in. DU948PWPQ Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Will not start - Whirlpool 24 in. DU948PWPQ Built-in Dishwasher


Check the switch, fuse,power contactor, the timer or electronic control board if available. ... Whirlpool 24 in. DU948PWPQ Built-in Dishwasher

Blinking start light whirlpool dishwasher - Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher


... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

Describe your whirlpool du948pwpq Problem: I have a whirlpool du948pwpq dishwasher in a tenant's unit. They said the delay start button is no longer working. Also, they cannot "de-select" the heated dry option. It seems to be an issue with the electronics of the control panel. I've already tried to "unlock" the buttons - no change. I also powered off the unit in hopes of re-setting - no change. Does anyone have any other suggestions? I am hesitant to call a service person (it's out of warrant


... Whirlpool 24 in. DU948PWPQ Built-in Dishwasher

Dishwasher starts but does not get water - Whirlpool GU2400XTP Built-in Dishwasher


Check vater control valve ... Whirlpool GU2400XTP Built-in Dishwasher

Machine won't start. - Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher


Put your washer on the lowest wash setting - press and hold the start button for about 3 seconds. The washer will run for about 5 seconds and then turn off (do not have the heated dry setting on when you do this).Turn it off ( ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Does not start - Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher


Have someone look over your breaker box and reset all GFI plugs these are the plugs in your house with the Black and Red buttons press all of these around the kitchen near the dishwasher and breaker box. If you finally determine the appliance is gett ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Power Light on but will not start cycle - Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher


Usually Whirlpool dishwashers have a reset code which is pushing the buttons on your dishwasher such as push heat dry, then normal, then heat dry, then normal, within 5 seconds - so push them fast and in that order and wait. It may take a couple of m ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Does not start, Nornal light blinking - Whirlpool GU2400XTP Built-in Dishwasher


Hello- Common problem. Touchpad has a short at 'normal' switch. Console assy. is about 120$ Installation instructions available. Let me know if this info helps- have more if needed.- Thanks- ED ... Whirlpool GU2400XTP Built-in Dishwasher

Wont start, blinks 7 times on a diode - Whirlpool 24 in. DU1148XTP Built-in Dishwasher


... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

Whirlpool built-in dishwasher GU2475XTVB1 will not start.


... Whirlpool Dishwashers

Will not start with light flashing - Whirlpool DU930PWS Built-in Dishwasher


It is possible that themachine does not start off the cycle because there are errors or feedback fromthe inputs. For the program to start up the main program controller mustinitiate the INLET/PUMP MOTOR/DRAIN to workwhen it is commanded .If thi ... Whirlpool DU930PWS Built-in Dishwasher

Start button wont respond - Whirlpool 24 in. DU1100XTP Built-in Dishwasher


If all the other buttons work except the start button, you have a faulty touch pad that will need to be replaced. Below is a \015\012link to a video you will want to download so you can see how to replace \015\012the touch pad.\015\012\0 ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Start light flashes 6 times - Whirlpool 24 in. ADG7540 Built-in Dishwasher


6 'start' led blinks indicates WATER TAP CLOSEDWater walve is switched on but flow meter sends no impulses or sends less tan 10 impulses in 10 seconds and the water indicator is off (empty)posible reasons: ... Whirlpool 24 in. ADG7540 Built-in Dishwasher

Hi I am in an emergency situation with an ikea whirlpool dishwasher. I have no idea what model it is since it's built in and I can't find the manual in my rental apartment. The machine works normally until the part where it's supposed to pump the water out after rinsing. At this point it starts to beep, once, and then 3 times. On and on and on. If I open it, there is water stagnated there. If I try to turn it off and back in, it will go through a whole new program and then I get the same problem


Can you feel the pump operate during the last wash cycles? if not either theres a bad pump motor or lack of power to the pump during that cycle,if this is ok,then remove the drain hose to the main drain to see if this is plugged up with food debris ... Whirlpool GU2400XTP Built-in Dishwasher

My Whirlpool ADG6340/1 IX built in Dishwasher has stopped working and when turning on and pressing the start button, the light flashes 4 times between pauses. what could the problem be?


... Whirlpool 24 in. ADG6340iX Built-in Dishwasher

Start light just blinks when you press it - Whirlpool GU2400XTP Built-in Dishwasher


Whirlpool built ( Kenmore, Kitchen-Aid, Jenn-Air, etc. ) dishwasher electronic control \342\200\234blinking start light\342\200\235 Hello, Welcome to FixYa.The most co ... Whirlpool GU2400XTP Built-in Dishwasher

Clean light flashes and it will not start up - Whirlpool GU2400XTP Built-in Dishwasher


Hi,This is an indication that the water did not properly heat. I have put together some instructions on how to reset the control so you can use the dishwasher and some things to check. Follow the link below and let me know if it helps. ... Whirlpool GU2400XTP Built-in Dishwasher

Water will not drain - Whirlpool 24 in. DU948PWPQ Built-in Dishwasher


Hi,\012Here is a tip that I wrote that will help you with your dishwasher not draining problem...Dishwasher Problems - ... Whirlpool 24 in. DU948PWPQ Built-in Dishwasher

Door won't lock - so it will not start - Whirlpool 24 in. DU1148XTP Built-in Dishwasher


Make sure it not hitting the cabinet some where ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

Whirlpool GU2300 built in Dishwasher. It rather suddenly began shutting off in mid-cycle. If I cancel or open it, getting it to finish the cycle or even drain takes many tries.Once started, the cycle might take several hours with long pauses during the cycle. When it puases, none of the lights are on at all. If the cycle is disturbed, the normal wash light blinks, and if I hit cancel, the cancel light and the normal wash light blink.


... Whirlpool Dishwashers

We have a new Whirlpool Dishwasher Model GU3200XTVY3, serial # F00404693 bought in April 2010. Yesterday,when we pressed the "normal" button, it started flashing then when we pressed the "cancel" button, it started flashing also. The dishwasher will not start when we pressed the "start" button. We tried to reset by turning off the power to the dishwasher and then turned it back on. All lights were off and then we pressed the "normal" button and it started flashing again. When we tried to pr


... Whirlpool 24 in. GU3200XTPS Stainless Steel Built-in Dishwasher

We have the Whirlpool dishwasher ,Model: ADG6 955. used it smoothly last night but this afternoon, it just will not start up. The green 'START" button keeps flashing and the dishwasher just does not start operation. I tried to reset it by holding onto the start button for a few seconds. The dishwasher stops and nothing more. KIndly advise


... Whirlpool Dishwashers

Whirlpool dishwasher whirlpool ADG7440 dishwasher is starting then after about 5 mins it stops and the start button is flashing 2 times then pausing then flashing 2 times again


Hi,\015\012\015\012I can't guarantee to solve this but we had flashingh light problem and in the end all I did was to set the dial to the wash I wanted and kept my finger on the start button for about 10 to 20 seconds and it suddenly woke up an ... Whirlpool Dishwashers

Whirlpool Dishwasher ADG 450. Start as normal and it keeps intermittentlly stopping and starting. Washs / drains fine, but sometimes cycle seams to last for a couple of hours. I think it is four beeps when it is stopping and then immediately starts again. We had a problem months ago where as the sink was draining into the dishwasher out pipe, so dishwasher wasn't draining / filling up. Fixed the problem by turning the pipe the other way so water couldn't flow that way - but I don't know if that


... Dishwashers

I have a Whirlpool model DU1055KJVQ1, Type 575-0 under-counter dishwasher which is less than 2 years old. In the last couple of weeks, it wouldn't start intermittently, and I would need to hit cancel on the keypad, and then restart. Now that doesn't work. When I try and start the dishwasher, it doesn't work. I press Normal for the cycle, heated dry for the Option, and then hit Start. The buttons light up for 20 seconds or so, nothing happens and then they go out. Any ideas?


... Whirlpool Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2015 seconds