Having problems with your Whirlpool 24 in. GU2500 XTP Built-in Dishwasher ?

Whirlpool gx2500 whirlpool dw has had repeated repairs / new pump and motor/ new sensor/ but still will only go thru about 20 mins of the cycle, and then the CLEAN light flash,it will onjly restart after a bypass. what is the proper repair now? i thought my repair man knew what he was doing, but im no longer sure


Answers :

Clean light blinkn can be a number of things, ranging form bad heating element, possible bad door latch( not maintaining contact through cycle) motor and sensor could also cause this( but now changed they're ruled out.. in order to correct this issue, ive even had to rpelace the entire wiring harness to machine, i would advise you deal with an AUTHORIZED WHIRLPOOL servicer, so he can have the whirlpool techline assist in any future diagnosis, instead of just changing parts randoml.
Repair Help & Product Troubleshooting for Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool gx2500 whirlpool dw has had repeated repairs / new pump and motor/ new sensor/ but still will only go thru about 20 mins of the cycle, and then the CLEAN light flash,it will onjly restart after a bypass. what is the proper repair now? i thought my repair man knew what he was doing, but im no longer sure


Clean light blinkn can be a number of things, ranging form bad heating element, possible bad door latch( not maintaining contact through cycle) motor and sensor could also cause this( but now changed they're ruled out.. in order to correct this issue ... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

I purchased a NEW Whirlpool dishwasher from Appliance Direct in Daytona Beach FL. The dishwasher was delivered broken. It needs a new motor pump. I asked for a new machine and they said it's their policy to fix a machine that's been delivered. I think I have a lemon. It's been a month now since delivery and they haven't even repaired the machine. Do you have any advise on how I should proceed? Glenda


You must go with the fact and hold the company accountable. 1 call speakto manager get his name and direct #. give him 3days to resolve the problem. ask him will it be repaired monday or teusday because both of those days are convinent for you.then f ... Dishwashers

Maytag Dishwasher I would like to know the proper water level after DW fills. Older Whirlpool units a quick guide was when water just covered heater. I have a new D/W and the water supply is difficult to access, there is a kink in the water line slowing the water flow. The D/W fills to bottom of heater, but because the unit is so quiet I can't determine if it is timing out or working properly. I intend to repair water line when counter work is done. Thanks for any help Gary


Newer Maytags should fill close or up to the heater not over. Sounds like your alright for now but I would get that water line fixed. ... Maytag 24 in. MDB8951AWS Stainless Steel Built-in Dishwasher

I have Whirlpool DU913 undercounter dishwasher. It is about 7 years old. The soap dispenser for the second wash does not open as it should. Is this a repair I can do myself? If not, is it worth repairing or should I just invest in a new diswasher? Thanks!


... Whirlpool DP920PF Dishwasher

When the cyle is complete the dishes are cold and wet and greasy ones not washed properly. I think it needs a new heater but the person who came out to look at it said it was because it is in my garage (?). I have always had my dishwasher in the garage and never had this problem. If it is the heater, is it an expensive repair or would I be better off buying new. I have a six year old Zanussi de6754


At http://www.usersmanualguide.com/zanussi/dishwasher/de6754\015\012you wil find the user manual, if the dish washer is instaled proper it ... Dishwashers

I have a Whirlpool Quiet Partner 3. It sat up for a few months because the control panel went out and it took a while to save up and order a new one. Now it blew the thermal fuse. I put a 15amp automotive fuse in it to try it, and it runs until it fills up and blows the fuse again. I am trying to figure out how to test the motor and the heating element to see if they are shorted. My local repair shop told me that they want to replace my new panel with their panel first, and that after that


A 15amp automotive fuse is rated for a 12VDC system in an automobile, not a 125VAC houshold electrical system in an appliance. I don't think your automotive fuse can handle the start current being drawn by the main wash pump as the dishwasher starts ... Dishwashers

We hav a aMaytag MJD 2000 AAW dishwashing machine displaying E3 which according to the manual means the water element does not work properly or th efilter mesh is blocked. The macine is not warming at all so we suspect the heater element is the problem. We where wondering how expensive this is to repair. Is it worth repairing or would buying a new appliance be a similar cost?


... Maytag Dishwashers

My Bosch dishwasher, S9J1F will not clean things properly, I've changed the arms, cleaned it. I think the arms don't seem to spin properly, (I bypassed the door switch so I could see them spin)I have tried new arms though, pump pressure or ?


Not enuff water in it or pump blockage or bad pump impeller. if you ran it with the door open even if the arms didn't turn you should have got drenched is the bottom covered with water about 1 inch deep some times the fill valve screens get clogged a ... Bosch Dishwashers

I have brand new whirlpool ADG7561 that has only been used a few times, without issue and it now will not start the cycle properly. It seems to start and can hear water filling then after a few minutes it stops and beeps 3/4 times. I have no flashing error light by the start button.


... Whirlpool ADG 7561 Dishwasher

Motor removal Our dishwasher (Model LDS 5811WW) has LE come up when you turn it on. We were told by LG that it needs a new motor...so how do we get one? Also do you have any instructions as to properly getting it out? The clsest repair person suggested is 1 hr. from us and it would cost 3/4 of what the diswasher cost originally.


I am having a same problem. You can open dishwasher sump assembly from inside the dishwasher and check if something is blocking white impeller. I tried to open impeller and sheared screw head as I did't realized it is left handed screw. Even after cl ... LG 24 in. LDS 5811 Built-in Dishwasher

Buzzing sound we have a gold quiet lll edition , it is now buzzing when we start it. we have had a repair man here twice each time he has taken it apart and cleaned it. he has said because we have hard water, the water oxidized and some sediment has broke though the seal into the motor and now we need a new motor. does this sound right? we have had dishwashers from whirlpool for years prior. never had to change a motor. please can you offer some suggestions? thanks very much desperate in Mexico.


If buzzing while it is washing then probably is a motor problem but mostly not from hard water just poor quality parts ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

WE have a LG dishwasher model LD-14AW3. It recently stopped working properly and stopped draining the water. WE called our dishwasher repair man in and he said he thought it would need a new board and we would be better off to discard the dishwasher.I took the dishwasher downstairs to discard but left it there for awhile as I still had reservations about it. I took it in and hooked it up again it worked very well doing the whole cycle. We brought the dishwasher back up into its place and it con


Hello, welcome to FixYa.\015\012\015\012The OE code is designed to indicate an overfill error, however there has been a revision made on these dishwashers since they can often incorrectly display the error. I doubt if there is anything very serious w ... LG Dishwashers

Whirlpool tud6700..bottom turning pressure arm not turning to dispense water to to dishes. Is this a problem that can be economicaly repaired or would it be wiser to buy new


... Dishwashers

I've a Kenmore - Whirlpool dishwasher purchased in 7/2002(665.17574200), which seems clogged. T The ''Accumulator Assembly'' (8268429) filter is clean, and I've stripped the unit down to the plastic components. This has happened once before, and the repair person cleaned some kind of secondary filter, but I can't locate that filter on the parts diagram. I'm guessing it's below the ''Protector inlet'' (8268390). Either I buy a new dishwasher, which seems a waste, or I find out how to clear the


... Kenmore 24 in. 17572 Built-in Dishwasher

Brand new dishwasher...not cleaning properly especially the bottom. I looked in while operating and I think the sprayers are not rotating, what would be the problem? Easy fix or call repair?


... Dacor Millenia MDV24 Built-in Dishwasher

Whirlpool adp 8540 dishwasher not washing properly. Not getting enough water pressure to spin the arms or even take the granules out of the wash powder compartment. Have checked hoses and water supply all Ok. Is is something simple that can fix myself or do I have to call an expensive repairer? L


I have had the same problem, for me it was caused by small pieces of food, normally woody grains, it blocks the outer jets.\015\012\015\012When looking you may not see that it is blocked because they seem to move around.\015\012 ... Dishwashers

My son and daughter in law bought a new home with all ge appliances and the dishwasher is americana. the dishwasher from the start has never worked properly. the water is cold and the drying cycle doesn't heat up. also, it doesn't drain completely. I think that this dishwasher should be repaired or replaced free of charge.


I agree, especially if it is less than 1 year old. See if the builder of the house will make arrangements for repair or replacement under his guarantee. If not then try the store or company that supplied the dishwasher. If the appliance was registe ... Maytag Dishwasher

Our Asko dishwasher no longer cleans the top shelf of dishes properly. Fine white and black grit is left on the dishes after every wash, and if there is any food residue on the dishes it does not come off. In addition, food residue that was not on the dishes to start with is being thrown up onto the top shelf and doesn't clean off the dishes. The control unit was replaced 2 months ago at vast expense, and this problem only arose following the repair. The only suggestion from Asko to fix the new


The problem is most likely that there is still water residue at the bottom of your machine. If the machine is not fully drained it picks up some of the residue and sprays that onto the dishes during the final rinse, leaving an unhealthy and un ... Asko 24 in. D3350 Dishwasher

Whirlpool adp 8540 dishwasher not washing properly. Not getting enough water pressure to spin the arms or even take the granules out of the wash powder compartment. Have checked hoses and water supply all Ok. Is is something simple that can fix myself or do I have to call an expensive repairer?


... Whirlpool Dishwashers

The spring loaded catch that locks the flap on the rinse aid compartment has broken on my dishwasher, this coincided with the tablet not being dissolved as the washer went through its cycle. is this connected or a seperate issue? Also can it be repaired or is a new machine needed.The model is Whirlpool ADG722


The catch should be replaceable. \015\012The timing is most likely coincidence. ... Dishwashers

Whirlpool Quiet Wash Plus not draining? After cycles completed, water remained in dishwasher. Cancel/Drain resulted in one very, very slow drain. When new cycle started, there was no draining at all. Help !! Any ideas or easy solutions? I am not near any repair places.


... Whirlpool Dishwashers

I purchased a new dishwasher on 2/22/07 at the Home Depot in Parksburg,Pa. I first had to have it repaired on 4/28/08 for wires stuck to inner door. They repaired two broken wires and added insulation so wires do not stick to the door. The second repair was a little more than two months later. On 7/18/08 they had to install a new motor because the motor locked up. Both times I waited several weeks due to not having money and appliance center being busy. I used J.B Zimmerman in Blue Ball,P


Hel1Dav2,\015\012\015\012I understand your frustration with having to deal with major repairs to a new applaince. However, I don't belive this is the correct forum that you need to use. I have found a helpful link that you may try in th ... Dishwashers

Dishwasher I am getting a run around with getting my LG dishwasher fixed properly. We had a tech more than once come in and look at our dishwasher. It has not been fixed and never dried the dishes properly. It is now leaking and going to a "del" level when we attempt to wash the dishes. It is also leaking on our fairly new tiled floor and under our new kitchen cabinet. Your tech stated the dishwasher was not installed properly. The installation dept , Francine stated it is not their problem


Not sure what you mean by a "del" level, but as far a drying issues:\015\012\015\012LG chose to use a very energy efficient drying method which relies on the residual heat of the dishes to help dry them rather than many manufacturer ... LG LDF6810 Built-in Dishwasher

Control panel on my whirlpool dishwaher not functioning properly


The console (control panel) is defective. The buttons may be getting stuck and/or are corroded. ... Whirlpool 24 in. ADG7540 Built-in Dishwasher

I have a craftsman Pressure washer Model 580-725400 the unit has ran great until today. I last used the unit 1 week ago with no problems but now I have to run the machine almost full choke to get it it rev up and run smooth. The engine oil is clean and filled to the proper point. The spark plug is new and gapped proper. The air filter is new also. And the gas is 97 Oct and fresh. When it choke it to crank the engione I move the choen to run and the engine struggles to run. When I move the choke


... Craftsman Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0744 seconds