Having problems with your Whirlpool 24 in. GU2548XTP Built-in Dishwasher ?

Troubleshooting to confirm

\015 Thanks for the repsponse. As you can see form all my posts, I have had several generic responses to my issue. Can you help me troubleshoot to confirm that it is not the sensors? It looks like it is two of the same sensor. If they are in series, that might explain the different voltage readings. The odd thing is that if I push on the right spot, then the cycle will start, but it is literally 15 mins of pushing all around the panel in the attemp to get it "latched" The door is latched though from the beginning, you can hear the click. I also taped off the two sensors to make sure they wer depressed and still no luck.\015

Answers :

Im sorry i didnt get back to you in a timeley manner but ive had some faimly issues to deal with as i answer these ? on my spare time,im glad you fixed your problem.
Repair Help & Product Troubleshooting for Whirlpool 24 in. GU2548XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Troubleshooting to confirm


Im sorry i didnt get back to you in a timeley manner but ive had some faimly issues to deal with as i answer these ? on my spare time,im glad you fixed your problem. ... Whirlpool 24 in. GU2548XTP Built-in Dishwasher

Dishwasher does not start. Confirmed power is making to dishwasher. It is as if there is no power to control panel - no led's or lights. Do not know how to follow power for further troubleshooting? Any instructions or guidance to doc that will help? Steve


Same symptomz, but slightly over a gallon of water remaining in bottom of washer. Found following with google:sounds like something is jammed in drain pump. pull out screens and on left side of sump (looking down into bottom, 9:00 positio ... Bosch SHU9915UC Dishwasher

My hotpoint dishwasher(model#hda3400goobb) will not run it's cycle. Was wondering about possible troubleshooting.


... Hotpoint Dishwashers

GE Dishwasher model GLD4408R00WW that does not drain properly. We have already worked through the manual's troubleshooting and verified the problem is not with the drain. We suspect a pump problem


... Dishwashers

Kenmore dishwasher Troubleshooting


Watch the light closely. If it blinks 7 times then pauses, this indicates a heater or door latch issue.\015\012\015\012Press the following buttons in sequence: Hi Temp Wash, Heated Dry, Hi Temp Wash, Heated Dry ... Kenmore Dishwashers

Water hasn't drained and combination of lights notin troubleshoot


Hi,Here is a tip that I wrote that will help you with your problem...Dishwasher ... Smeg STX2 Dishwashers

My Hotpoint model #hda3400g00bb will not start it cycle. Has power. Any troubleshooting possibilities?


... Dishwashers

Whirlpool ADP5550 causes electrical points to trip safety switch. have confirmed it is definately located to the dishwasher being turned on - at the dishwasher not the power point. Will I need a whirlpool technician (& how to find one locally) or electrician? TE


... Whirlpool Dishwashers

Will not drain. I have tried the troubleshooting tips in the manual. also the bottom rack falls off the track when moved. model gsd2300n10ww


Don't buy Any GE product, they are useless pieces of @@@@. ... GE Dishwashers

Westoint Dishwasher I have looked in the manual under troubleshooting tips, but didn't find anything on the problem. The dishwasher goes into cycle,but during the wash cycle it stops,makes alarm and the wash and rinse ligts come on. And now I can't even find the product on this site.Westpoint Dishwasher WQP12-9240. Thankyou My dishwasher is stopping at stage 2 of the programme after beeping once. Quite often the detergent flap doesn't open. Am at my wits end and threatening to leave home!!!! Th


Hi again,\015\012\015\012That should be OK. Just get in touch with your sales rep or his boss. Somebody there will be able to look up the record of the purchase. If they ask for model & serial numbers, you have them. You will find ... Dishwashers

New hoover HED 6612-80 dishwasher all indicator lights staying on, manual says due to overfilling with water which is confirmed by water leaking on to floor, how do i solve this problem


Hi, i have same problem with my hoover dishwasher same model as your own, did you ever find out how to fix the problem. your help would be really welcomed. thanks lesley ... Hoover Dishwashers

Pressure Troubleshooting what is the pressure that is needed?


Light tasks - 100 bar - garden BBQ & furniture, cycles, bins. Medium tasks - 110 bar - cars, fences, boats, pools, hot tubs. Tougher jobs - 110-130 bar - Roofs, garden decking, bricks, farm machinery. ... Karcher Quick Connect Nozzle Set

Kitchenaid kudr25shwh1 dishwasher troubleshooting stops in mid-cycle and rinse only light blinks


... KitchenAid Dishwashers

Error f8 Hi there I have a Fagor Innovation dishwasher. I get an error f8, related to the water pressure. I checked and the pressure seems to be OK. Any idea of how to troubleshoot it? Thanks and regards


... Fagor Dishwashers

'Dead' DU1100XTP The dishwasher will not start - no lights at all - no indication that anything's working (although I confirmed the unit has power). I've seen numerous posts regarding the control board - is there a problem with these in general? My unit is just beyond the warranty (naturally!) so I'd like to know if there's been any concession made by the manufacturer due to the number of problems. I'd gladly replace the board if Whirlpool would send me one. Thanks.


This may sound simple but... make sure its plugged in all the way. ... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Ge quiet power 3 troubleshooting


First clean the sprayer arm of all debris. In the back of most dishwashers there is a screen on the bottom that is often full of junk, debris and other stuff from dishes not being scraped off.\015\012\015\012Clean that screeen off. ... Miele 24 in. G665 Built-in Dishwasher

Troubleshooting problem with two drawer fisher & payke dishwasher


My dishwasher drawers grind away while showing F1. I have had to turn off the breaker because I cannot get the machines to turn off with the power switches. I turn them off and they just start up again in a few seconds. ... Fisher DD603B / DD603W / DD603H Dishwasher

Dishwasher my dishwasher lately has not been cleaning well-the soap dispenser opens, but at the end of the cycle, most of the soap is all clumped in the dispenser, and there are food particles and film all over the dishes. Please advise what i could do to troubleshoot, as i do not want to call in a repairman at this point-Thanks!


If you are you using a liquid soap or packets that will be the main problem.If your unit fills with water circulates the water and drains the water,and also heaters are working then you probally need to change to cascade powder soap.The film on the d ... Dishwashers

Frigidaire Dishwasher Hi, I have installed a new model GLD2250RDC0 Frigidaire dishwasher and it will not start. Power and water supply is connected. When I push the cycle button for Normal the light comes on but when I push Start nothing happens except the "hi-temp wash" and "no heat dry" lights flash. I assume this is some kind of troubleshooting code but the manual does not cover this and I am in Honduras so service is non existent. Any ideas? By the way, I was a builder in the States for 25 y


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

Miele dishwasher troubleshooting


Either your heater is broken or spray arms are clogged. ... Dishwashers

Re; Smeg DWD612CSS dishwasher. Please help. On setting our dishwasher to operate overnight, we were awoken by a loud bang only to find a strong rubber burning smell and the trip had blown. After investigating we found that the part no DWF 409 interface filter required replacing which we have done. Now however the dishwasher runs to the middle of its cycle and stops. The troubleshooting page of the manual tells us code E3 applies i.e.first 2 phase lights are lit and states "The appliance is not


I would first look for anything that may be stuck anywhere in the machine that may be causing it to come up with an error. Possibly something that was in the dishwasher is making it think it can pump out the water even though it is draining.\01 ... Dishwashers

No water Thanks for the try, but I have already replaced the inlet valve. Still no water. I also checked and confirmed that I am not getting 120v to the inlet valve and/or float switch.


Check your heat dry options I have seen them short out a lot and that will prevent the water valve from getting 120v. ... Frigidaire 24 in. FDB126RB Built-in Dishwasher

Dishwasher i need help either installing for troubleshooting my 18' portable frigidare dishwasher. when the dishwasher is turned opn and it starts to fill the water flows out of the bottom of the machine what is the problem and how dod i fix it is it the hoses ? it also hooks up to the sink it isnot a built in dishwasher so is the hose for the draining need to go in the sink or does it hook up somewhere under the sink?


I would put the dishwasher on its back so you can see underneath to check the fill and drain hose to make sure there not damaged in any way to cause it to leak. if it all looks good under there return it upright and remove the front lower kick panel ... Frigidaire 18 in. FDR252RB Built-in Dishwasher

ASKO 1595 daer greendude, indeed your troubleshooting was right!!!! i pulled out the dishwasher and the base was full of water. once i got water out, the fault sign went away and it's ready to run its normal cycle. now i need to figure out where the leak comes from: either the fitting or the valve itself. just in case i have to replace the valve: any good source to get it from? i live in california. once again, thank you much!!! i'll keep you posted on the developments


I live in australia our part no is 8052120 ... Asko D1776 Stainless Steel Built-in Dishwasher

Ge quiet power 3 troubleshooting


I am trying to se;ect pots and pans so I can wash my dishes. The button is blinking and not one button I push makes a difference. I can not reset........nothing! Help. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0181 seconds