Having problems with your Whirlpool 24 in. GU980SCG Built-in Dishwasher ?
Dishwasher stopped working but lights still light up
Repair Help & Product Troubleshooting for Whirlpool 24 in. GU980SCG Built-in Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have a maytag mdb6650 aww dishwasher. The dishwasher just stopped. The light on the control panel is on. If I push the buttons to try a different cycle, the light over light wash remains lit, so the buttons don't seem to respond. I was wondering if it is the control assembly, or if the door switch is not working. The handle cracked a while ago, but if the dishwasher still worked even though the handle had cracked in half.
... Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher
I have a kitchenaid dishwasher model KUDS01FKSS0 which is not running. For the past 2-3 months it occasionally stopped mid cycle with water still at the bottom of dishwasher but eventually resumed working. Now it just doesn't run any more(and there is no water presently in the dishwasher tub). The user interface part (keypad) seems to be working. I can press the keys and the corresponding LED would light up. However after I close the door, nothing happens. There is also no noise what so ever. A
... KitchenAid KUDS01FKSS Dishwasher
I have a kitchenaid dishwasher model KUDS01FKSS0 which is not running. For the past 2-3 months it occasionally stopped mid cycle with water still at the bottom of dishwasher but eventually resumed working. Now it just doesn't run any more and there is water presently in the dishwasher tub). The user interface part (keypad) seems to be working. I can press the keys and the corresponding LED would light up. However after I close the door, nothing happens. There is also no noise what so ever. Any i
THE MOTOR SHOULD MAKE NOISE IF ON, CHECK THE MOTOR OR TIMER. ... KitchenAid KUDS01FKSS Dishwasher
Stopped Working Hi, My Zanussi Aquapulse Dishwasher (DE6744S)has just stopped working. The red on/off switch still lights up when I try to start off a wash but nothing else happens. I know this is probably just a case of "call out a repair guy" but, even though I've had the machine a few years, I'm I bit miffed on the thought of coughing-up to have the thing repaired because I very rarely use it. Any suggestions? Many thanks
The problem is with the PCB, this is the board behind the buttons, you can buy this for £120 or you can get it fixed by QEA for about £45 link below. I am not an engineer but I replaced mine in 10 minutes.\015\012 ... Zanussi 24 in. DE6744S Free-standing Dishwasher
I have a candy dishwasher seriel number:CSD 68, which lights up, prepares to work, then does nothing. The pre-rinse light comes on, starts to fill up and then stops. It is water mains fed and all the filters are clean but it still does not work. What can be wrong with it?
... Candy Dishwashers
I have a whirlpool DU915 built in dishwasher. During the last pre wash cycle after filling with water, it suddenly stopped and the lights on tne control panel went out as it was suddenly unplugged. All connections are still intact, the breaker box to the house has been checked. The shared outlet is still working, as the garbage disposal still operates normally. The latch on the door appears to be functioning. Can you please give me a direction to look?
I have a GE Quiet Power 2 and the face plate (buttons) stopped working (i.e no lights, sound, action). Is there a fuse for this or something I can dismantle and replace? The dishwasher shares power and the shared sources are still working and the breaker is not tripped. Any suggestions?
Look for a bad fuse on the control board. Soldered in near the power connection. You may see a burn mark from under the fuse. ... GE 24 in. GLD5860LSS Stainless Still Built-in Dishwasher
My ASKO 1805 Dishwasher started to smell weird and white smoke came from it. I turned it off, but after I turned it on again it just keeps pumping water in and out, I can't get in contact with it (None of the indicator lights are working and it is not reacting to any commands) In addition the safety feauture that is supposed to stop all operation the moment the door is opened is no longer working. (i.e. even with the door open it is still pumping water) Does it sound like an expensive repair? (
Hello,\015\012\015\012Welcome to FixYa. Based on your description ( specifically the white smoke and smell ) I would suspect the control board is faulty. \015\012\015\012If the unit does not stop when the door is open can be r ... Asko 24 in. 1805 Built-in Dishwasher
Proline dishwasher stopped working mid cycle the salt light was on re-filled salt light still on and nothing is happening
Dishwasher stopped working but lights still light up
... Whirlpool 24 in. GU980SCG Built-in Dishwasher
My siemens SE 24 M 254 dishwasher has stopped working. Lights on the front have gone off. Elec supply and powerpoint still working but some water left to drain and no sign of life. What may be the problem? Do you have a set of instructions?
GE Profile Dishwasher, GSD4920 won't stop running. Still spraying water. No lights on the display. Looks like it ran all day since I started it before work. I turned power off and back on, but it still starts running when I close the door. Water is in the bottom and looks pretty dirty. Any ideas? Thanks, Larry
... GE GSD3800G - Multiple Color Built-in Dishwasher
My Kenmore Dishwasher won't turn on. Was working fine last week, but when I went to start it yesterday, nothing starts or lights up when I push the button. The options buttons still light up, but thats it, the wash cycles and the start and stop buttons...nothing happens. I tried tripping the breaker to reset and it did no good.
Hi,\015\012\015\012A device may cease to function or operate sporadically if the electrical cord is damaged. Inspect the cord for any damage. Check whether there are any black smudges or burn marks on the outlet, cord or anywhere the cord comes ... Kenmore 15129 Built-in Dishwasher
I have a Whirlpool Dishwasher, model DUC600, serial # FS2202628. It suddenly stopped working and "clean" light is flashing. I turned the power off, hoping to reset it but the light is still flashing. Can you give me some direction? If it's a component gone bad, I can replace it if you can tell me which one. Thanks! Joe
... Whirlpool Dishwashers
Do indesit dishwashers have a reset button? If so where is it located on the dishwasher? As ours just stopped working for no apparent reason yet the power light still shows up but when you push any of the 4 cycle buttons nothing happens?
No they dont have a reset button you might be able to reset by holding the on button for 4 to 5 seconds ... Indesit 24 in. D63 Free-standing Dishwasher
Whirlpool dishwasher DU1015XTXBO Stopped working during cycle, acts like don't getting any power. Checked the plugin and it works. No lights or anything coming on the dishwasher. Its like it just
... Whirlpool Dishwashers
Kenmore dishwasher, model 665.170 344 01. "Clean" light keeps flashing and will not stop. Have tried everything in the manual and the light still will not stop flashing.
Only reset you can do is unplugging power cord for 10 minutes.The control panel it is probably faulty and in need for replacement. ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher
Hoover dishwasher the start light flashes when switched on takes ages to go out machine starts working for 2 mins then stops can you help me I GOT IT FROM CATALOGUE IN2005 parts are still covered but not labour
... Hoover 24 in. HD96M Free-standing Dishwasher
I have a Whirlpool Dishwasher Model #GU240CXTPB1. The normal light won't stop blinking. Tried turning the breaker to reset, but still blinks. No other button works.
Whirlpool dishwasher reset sequence is usually to hit the heat dry then normal then heat dry then normal buttons within 5 seconds and it usually resets. ... Whirlpool GU2400XTP Built-in Dishwasher
My whirlpool dishwasher just stopped working the middle of the cycle with water still in the bottom and now nothing lights up or comes on and the water is just sitting in the bottom. Any suggestions?
Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. If the cycle doesn't\015\012complete, then the first thing that should be checked is the Timer and then the\015 ... Whirlpool 24 in. GU3200XTP Built-in Dishwasher
The dishwasher stop during the wash cycle. It did finish draining the water from the tub. The machine is not showing a power signs, I check the circuit breaker and the fuse is not tripped. I open and closed the door and the door latch seems to be working fine. There is just no power to the washer. Usually when a machine breaks down, there still is power or buttons that light up on the front of the machine. I looked on the internet and many say that the fuse could be tripped. No where can I find
... Whirlpool DU912 Dishwasher
My Bosch Classic Electronic Dishwasher has stopped mid cycle and the "Check Water" light is on. It won't drain at all. The detergent is still in its receptacle. I have tried the reset button on the dial but that doesn't fix it. I have also tried the old, turn it off, turn it back on routine which didn't work either. Please help!!
... Bosch Dishwashers
My dishwasher will not turn on at all, i have changed the fuse i the plug but still no joy. The light was flickering on and off before it completley stopped working, any ideas?
... Zanussi 24 in. DA6141 Built-in Dishwasher
Dishwasher stopped working. Lights blinking on panel. Turned off breaker and turned it back on after 10 secs and it still would not start.
... KitchenAid Dishwashers
My Amana dishwasher will not start anymore. The selection panel lights stopped turning on a few months ago, but we could still push the start button to start the cycle. Now that won't even work. Obviously an electrical panel problem, but what can I do to fix it?
... Amana 24 in. DWA22A Built-in Dishwasher