Having problems with your Whirlpool 24 in. GU980SCG Built-in Dishwasher ?

980 series I need the dimensions of my dishwasher so I can find a replacement that will fit in the cutout in my cabinet.


Answers :

Hello.
\015\012Take a measuring tape and measure.
\015\012Easy,nice and clean also
\015\012Good luck
Repair Help & Product Troubleshooting for Whirlpool 24 in. GU980SCG Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

980 series I need the dimensions of my dishwasher so I can find a replacement that will fit in the cutout in my cabinet.


Hello.\015\012Take a measuring tape and measure.\015\012Easy,nice and clean also\015\012Good luck ... Whirlpool 24 in. GU980SCG Built-in Dishwasher

I have a Lady Kenmore(model 665-1596581) that needs replacing. Is there a current DW model that will accept the wood panels from the Lady Kenmore? Where can I find the dimensions of the current cabinet door kit for the DU 1055 XTS to see if the old oak panels will fit the new dishwasher.


... Whirlpool DU1055XTS Built-in Dishwasher

Hello, I purchased a Kitchen Aid Architect II series KUDSO3FTPA3 ~ two years ago. It is deigned so you can put your own panel on it. Duw to a design issue with my cabinets I was not able to add my own panel and wanted to purchase the stainless panel to cover the front of the dishwasher. Kitchen aid was no help, they sold me a panel that would not fit and then would not take it back! Then they said I would need to replace the entire door for $389.00! I need to know if there is a stainless


There is a MUCH better way! go to www.applianceart.com, these guys have tons of panel options including stainless and fax stainless that was featured on HGTV and the Today Show. www.applianceart.com (Appliance Art) ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Broken fitting The plastic curved piece that attaches the hose to the white fitting on the back of the dishwasher broke, and I need a replacement.  I have been to Home Depot and they don't have anything to fit it, and I was told to go back to the manufacturer for a replacement piece but have looked online and can't find anything that would allow me to order the part.  Help!??


You don't have to change that piece,just tie the hose (drain hose ) to something that is equal height,this prevents siphoning. Please Rate This ! ... Danby 22 in. DDW396 Free-standing Dishwasher

Need exact maytag MDBD820 dishwasher specs (measurements) so I can replace it with a new dishwasher with same dimensions which will fit in the same small space. I am unable to pull the old maytag all the way out to measure it. thanks!


... Maytag Dishwasher

Replacing dishwasher and need the dimensions for the Whirlpool Gold GU980SCGB3 Built-in Dishwasher to make sure the new one fits where this one is currently. Can you help?


... Whirlpool 24 in. GU980SCG Built-in Dishwasher

I need the dimensions for GE dishwasher GSD500G. For fitting a replacement washer.


Under the counter dish washers are very standardized. Just measure the current counter height and width of the opening. Nearly everything will fit unless it's a special order. GSD500G install dimensions are available on-line. Just Google the Model Nu ... Dishwashers

I need the dimensions of my maytag 24 inch 18 yr old builtin WU284 dishwasher. I was planning on replacing it, and I wanted to make sure the new one would fit into the opening.


... Dishwashers

Dishwasher I need to know the dimensions of a Siemans Dishwasher that I would like to buy sight unseen. The model number is SE657390G, and although it is built in at the moment, the owner said that it can also sit independantly. I need to know the dimensions to see if it will fit in our kitchen.


(H x W x D). ? 810-870 x 598 x 570 mm. ... Siemens 24 in. SE25A266 ExtraKlasse Free-standing Dishwasher

We need to replace the locking ring in the bottom of our Asko 1716 dishwasher.(It's cracked) I can only find one kind of replacement ring for that,but it looks like the right size. I need to know if Asko uses one ring for more than one model of dishwasher?It's a 5" locking ring for the bottom well of the tub. Thanks for your help!


Only 1 size ... Asko D1716 Built-in Dishwasher

I need to replace the heating element and electronic control board on my Kitchenaid KUDS01DL Dishwasher. I have the parts. I have been able to find directions on how to replace the heating element, but am not finding anything on the electronic control board. I don't even know where this part goes. I am guessing somewhere in the door, but can't find any instructions. Help...


... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

Need exact dimensions of Maytag Performa dishwasher model PDB1100 or PDB2430


... Maytag Dishwashers

Dishwasher we recently removed our old dishwasher and need to clamp off the water line what size cap do i need cant seem to find one to fit 1/2inch to big 3/8didnt work either hwo do i cap off to prevent leaking


3/8 tubing is the normal size. other than buying a few different sizes from hardware store, (return the ones that dont wrok. not much else that can be done. well excepot call a plumber cause there shloud be a working shut off valve leading to dishwa ... Tappan 18 in. MDR251RE Built-in Dishwasher

Hi i have a technika bellissimo dishwasher and the cutlery basket has perished, i need to find a replacement. Also, the powder, tablet dispenser does not close or open properly so i need to just put the tablet straight in the dishwasher is there a spare part for this? many thanks!


Make sure the top drawer is fully pushed in when closing the dishwasher - that fixed the dispenser problem for us ... Dishwashers

Neff Dishwasher Hi; I have a Neff slimline Dishwasher that won't fill with water but works ok if I fill with a bucket. I have searched the net and found that it probably has either a stuck float or a faulty inlet valve. The probelm is I can't find these things. Should I pull it out and turn it upside down or what? And if I do need to replace one of these where can I get them from? I have tried a search online but can't find them.


Hallo Champer,\015\012\015\0121)Be sure water supply is arriving with enough pressure. \015\0122)If the hose between the crane and dishwasher has an aqua-stop ( or water-stop) which you recognize at the hose being enlarged twice the size close to the ... Neff 18 in. S5943 Slim-Line Built-in Dishwasher

Trying to find the dimensions of the Miele G694 SC Toughtronic Turbothermic Dishwasher. It doesn't appear to be the standard 24 inch size and wanted to verify the dimensions before I replace it with another dishwasher. Any help would be appreciated.


Hi,\015\012\015\012if you go to the Miele website you should be able to download the manual for the machine if you don't have one and in the installation part of the manual this should give you dimensions. if not Miele service dept should ... Miele 24 in. Touchtronic G694SC Built-In Dishwasher

I have a Necht dishwasher. The dishwasher door does not close therefore I can not get it to operate. Someone came to have a look at it and they said that it needs a replacement for the door latch. The problem is I do not know where I can find this replacement for this brand ( Necht). Can you tell me where I can burchase or order it from? a website or a shop.


Depends where you are located. Try google .com and search for Necht. ... Dishwashers

My DPD 3100 is leaking from a brass fitting on the side of the pump (opposite of the white ??reset?? button. The brass fitting has a star shaped whole in the center. When i remove the fitting, there's a heavy duty spring behind it. Do i need to replace the fitting, or is there another problem? Where do i find parts for this?


First things first, before replacing I would wrap this valve with teflon tape and then retighten and see if the leak stops, I checked the entire schematic and found no listing for a spring so this is part of a valve assembly of some type. It might b ... Dewalt DPD3100 Gas Pressure Washer

I have a kitchen aid dishwasher model number KUD101TJBLO. I have had the thermal fuse replaced numerous times. It may run two weeks ir it may rub two cycles then the fuse blows. My serviceman has given up on finding a solution.He has replaced the control board and the door switch. However it continues blowing the fuse. I read on the internet that you need to replace the entire wiring kit that comes with the fuse but my repairman says this will not fix the problem and refused to replace the kit.


Hi\015\012\015\012\015\012Thanks for using FixYa. Please check for the short on the wires near the heating element. Also check the resistance of the heating element, it should not be more than 1.6 K ohms. Also ma ... KitchenAid Dishwashers

I need the built-in dimensions for a Maytag dishwasher model DWU 8250. I need to replace the model and I need something similar in size.


... Dishwashers

G661 SC My Dishwasher wouldn't take the water, and I had a Technician come by. He opened the right side of the dishwasher and said that I need to replace the  large White Plastic Part that transfers the water from the hose to the inside of the dishwasher. Does anybody know the name of it, or where I can find one for this model?


It's called the water intake. They usually dont give too much trouble. Can you give more info on the symptoms please?\015\012Any lights flashing on the machine? If so which ones?\015\012Is any water at all coming in? or is the machine tot ... Miele 24 in. G656SCi Plus SS Built-in Dishwasher

Have the same problem as other with the maytag quiet series 300 model MDBS561AWB dishwasher. Two of the buttons on the front light up, but dishwasher will not start. Don't know if CBoard or the buttons or the ribbon cable is the problem. Took the door apart and couldn't find any condensation....Looks like maytag has done it again......could use some help with the cost of replacing all those parts. Will help me decide if better to buy new dishwasher.....preferrably not a maytag or whirlpool, or a


... Dishwashers

Bent leg We had tile installed and so we have to be able to adjust the legs by approx 1/2 in. to pull the dishwasher out. The timer went out and so we were going to replace the dishwasher, but the new one won't fit in our cabinet. So, while trying to put the Bosch back in, I guess the back leg hung up on something and bent ... can't screw it in, can't screw it out, dishwasher is out of level as it is. Questions as follows: 1) how important is it to have it level? 2) any suggestions on wh


It's hard to say what to do about the leg without seeing it. You should at least try to get something under it to get it level as possible. If not perfect, it is better to have it tilted slightly back than foreward. ... Bosch 24 in. SMU40 Built-in Dishwasher

I need a 32 inch dishwasher to fit under existing cabinets


32 inch is bigger than I have ever seen - the standard is 24" - but apartment models can be 18" ... Dishwashers

I need to replace my dishwasher. I need to know size specs to order one that will fit. My measurements are a little dif. Then what is offered. Can anyone help??? Ge model no. Gsd4030y70ww


... GE Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2454 seconds