Having problems with your Whirlpool 8531292 WHIRLPOOL 8531292 ELECTRONIC CONTROL BOARD ?

Whirlpool Dishwasher DU920QWDB3 control board 3375556 has been updated to 8531292..but wiring doesnot match up ...any ideas..?????


Answers :

Repair Help & Product Troubleshooting for Whirlpool 8531292 WHIRLPOOL 8531292 ELECTRONIC CONTROL BOARD

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool Dishwasher DU920QWDB3 control board 3375556 has been updated to 8531292..but wiring doesnot match up ...any ideas..?????


... Whirlpool 8531292 WHIRLPOOL 8531292 ELECTRONIC CONTROL BOARD

I'm attempting to reuse a Maytag dishwasher motor for a bench grinder. Since this is a reversible motor, I'm not sure how to connect the wiring to a simple switch so that it works in one direction only. The motor has 4 wires: blue, gray, red, yellow. Not sure which to connect to the hot (black), return (white) and ground (bare) wires from the romex and can't find a wiring diagram online for this dishwasher. Any ideas? Thanks.


... Hobart 29 in. AM15-1 Free-Standing Dishwasher

TV static I just installed a new dishwasher. When it is running, it causes static lines on the TV. Prior to the new dish washer, I did not have this problem. It is wired correctley, and not on the same circuit. As I stated I did not have this problem until the new dishwasher. I called the service people for the dishwasher, and they stated they could not help me. Have you got any ideas, or do they make some type of filter I can put on the line to the TV.


There should be a suppressor fitted to the mains terminal block on most dishwashers. if this is not the case you will have to get hold of one you plug in. regards ... Dishwashers

Bosch she3ar76UC/07 In the box where the house current is connected , the load wire (white) has been hot and insulation burned. No visible damage on the back side feeding the dishwasher. Cleaned up the white re connected, have power, dishwasher will not turn on. Any ideas, is there a fuse somewhere? Thanks


... Dishwashers

I have a Neff S544X2gb/17 dishwasher which seems to be dead i.e no programme lights on. Have checked fuse in plug, dishwasher on/off switch which has live going to it and out, interferance filter is ok as is wiring harness in door panel. When you first switch on, for a split second you can hear a noise coming from the aquastop valve. Any ideas?


... Neff Dishwashers

My dishwasher smells as though the wiring is burning when it is on the dry cycle. (There is also a very faint odour while cleaning as well.) Any ideas as to what may be causing this. I can't see anything on looking underneath while the thing is operating


Make sure that you don't have the heat dry cycle on. The element gets hot and if it was not used for a while, will give off an odor. Other than that, there may be some moisture on some connections which may cause it too. But I thinks it is more likel ... Dishwashers

What wire colors match up for hooking up LG dishwasher?


White to white\015\012\015\012green to green or bare\015\012\015\012red or black to the red or black from the house wiring. ... LG 24 in. LDS 5811 Built-in Dishwasher

Own a Kenmore 665 dishwasher. The clean light is flashing (7 times) and the machine won't run. Have pulled the control panel and checked the door latch switches and they appear fine. No obvious burned wires any where. Any ideas on what this could be? thanks


It sensed a problem in the heater circuit. try this sequence to reset the code. If it comes back again you will have to determine a cause.The reset sequence used was reported to be the following:\015\0121) Crack the door open. ... Kenmore Dishwashers

Re: bosch-integra-500-shx45p05uc PEASE, please, tell me how to turn off the annoying signal that comes on at the end of the cycle!!!!! Who had the big idea to add this feature and what is so important about being alerted when the dishes are clean? And if it can't be turned off, is there a way to disconnect the wiring and disable it? If so, how and if not, is it legal to shoot your brand new dishwasher or throw it out the window? Thanks so much!


... Bosch Integra 500 SHX42L15UC 24 in Builtin Dishwasher

ASKO D1706 This dishwasher was working well then it tripped out the fusebox and keeps on doing so. The on light is on when connected but when you shut the door it trips the fuse box on the house. The wiring looks ok, there is no water leaks in it. Any ideas


I agree with marine0612, It depends on when it blows the fuse box. ... Asko D1706 Built-in Dishwasher

MY DISHWASHER WILL NOT TURN ON- THE WATER HAS NOT FULLY DRAINED FROM THE LAST WASH-I HAVE CLEANED OUT THE FILTER AND ALL THE WIRES SEEM TO BE CONNECTED. I AM NOT SURE WHERE THE PLUNGER OR PUMP IS LOCATED AND IF IT IS A GOOD IDEA TO OPEN THEM BEFORE I CONSULT AN EXPERT.


If theres no lites at all check power with volt meter at cord in the little box at the bottem panel.if power ther next check door switches then board.you can look at your wiring diagram for you checks.its on the bottem also ... Dishwashers

I am installing a Kenmore dishwasher model 13743. I have direct wired the washer?s terminal box wires to the wall power via a BX wire and the washer doesn?t respond. None of the panel buttons are active. With a multimeter, I find that there is voltage on the wall wires and on the dishwasher end of the BX cable wires that hard wired to the wall current. Even though, when I connect the dishwasher?s terminal box wires to the BX wires as directed in the Installation Instructions (white to white,


Next step to check the door switch...the door must close and the switches on the door must close to send power to the control...let me know ... Dishwashers

I'm installing an electrolux dishwasher, the first thing I'm going to do is the electric wire. I know I have to attach the black white and green (ground wire).I've done this before with my Maytag and it was a breeze. When I open the elec. box on the electrolux dishwasher the black white and green wires go into the box from the Dishwasher and then THROUGH THE BOX AND THEN BACK INTO THE DISHWASHER>>>>>THERE IS NO END........... In the Maytag I just opened the box on the dishwasher and the ends of


There should be a complete wire connection already there ready to be plugged in. If not, typically at the back of the unit there should be a black plastic box that when opened will indicate 3 terminals. live - neutral - and earth. Looks to m ... Electrolux Dishwashers

Need to know how replace a 3 prong plug on my dishwasher model # fdb1050rem0 frigidaire dishwasher the wires on dishwasher are white,black,red wires on 3 prong are green an 2 white wires


On libnk below tells you how to change the plug. Step 8\015\012\015\012http://manuals.frigidaire.com/prodinfo_pdf/Kinston/15442730 ... Frigidaire Dishwashers

KitchenAid dishwasher Hi I have kitchen aid kds 20 dishwasher around 25 years old it has a broken motor and I was trying to put a new motor in it,the old motor has 3 wires white,black and ground but no extra startrelay. the new motor (partno: 4171686 from whirlpool) has 4 wires white,black , yellow and ground , also in package was startrelay but no wiring info for this motor. I Need wiring info if someone can help. Regards. Bjorgvinj


... KitchenAid Dishwashers

Electrical for dishwasher insallation-missing wires?


Black wire is phase,white is 0,you need single phase pork for this wire if it is on devices. ... Dishwashers

Dishwasher fills with water and then stops. No lights are on at all. I cked wiring and circuit breaker and no issues there. I then flipped off circuit breaker over night. Got up next morning and flipped breaker back on. Dishwasher lights were on and when I pushed Start button, it ran fine. Now it is doing same thing except circuit breaker trick dont work like last time. THERE is NO issues with wiring or connections to dishwasher.


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

I wired a ge dishwasher ..white to white and black to black. the ground..green wire a screwd to the dishwasher.. turn it on and everything worked ok til the pump came on and the the black to black connection overheadt and starte a fire.... what did i do wrong...note my house wire has only white and black...thanks


Well, hard to say at this point. Your wiring sounds correct, but there may be some other stuff going on which you may have not anticipated. First off, what size breker is attached to the wires you connected to the machine. Most household machine requ ... Dishwashers

I am installing a dishwasher. When I went to wire I had only two wires a white and blue comming through the house wiring and a white and black from the dishwasher. Does blue go to black. White to white and how do I gound it Thanks George


If you have a volt/ohm meter you can check for Power on the Blue wire. Or you can open the face of your fuse box and look to make sure the Blue wire is connected to the fuse. If it is, just hook up your Black from dishwasher to the blue from house. ... Dishwashers

Burnt wiring insulation dishwasher & aluminum house wire


Your problem is most likely the aluminum wiring. Begin by running a copper line to your dishwasher eliminating the aluminum. use Romex Building Wire, NM-B 12/2 with ground and a 20 Amp circuit breaker ... Dishwashers

Bubbles coming out of door on start My wife started the dishwasher and my daughter started screaming in about a minute. Bubbles were pouring out of the bottom of the dishwasher. We felt like we were in a Lucy Ball TV show. The soap had not even dispensed yet so I have no idea where it came from? Any ideas?


It came from some dishsoap (not dishwasher detergent) Simple solution is add 1 cap of fabric softener to the bottom of the dishwasher and restart ... Whirlpool GU1100XTLB / GU1100XTLQ / GU1100XTLT Built-in Dishwasher

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher

There was a short in the junction box. i fixed that by stripping wires and installing new wire nuts. the dishwasher ran. for some reason the water is NOT entering the dishwasher


There is a chance that the coil on the fill valve has become bad. If the valve was being operated at the time the short occurred the coil could have overheated and burnt up.A couple ways to check it would be;\015\012\015 ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

When exterior breaker panel was replaced, my Frigidaire dishwasher (model FDB989GFC2) was accidently wired to 2 breakers and briefly took a 200v load. It started, then immediately showed a Power Failure code and shut off. The wiring has since been corrected but the dishwasher now shows no signs of life. Is it terminal or can replcement parts solve the problem?


Hi\015\012\015\012\015\012Thanks for using FixYa. You’ll need to check the following things--\015\012\015\0121. Fuse (blown or tripped).\015\0122. Check the wire fasteners at dishwasher junction box. ... Frigidaire Dishwashers

We had a short in the wiring where the dishwasher plugs into the wall. After fixing the wiring, the dishwasher now has a message "OE" when I turn it on.


Hi\015\012\015\012\015\012Thanks for using FixYa. Error OE in your LG\015\012dishwasher is a drain error, which is displayed when the unit won’t drain out\015\012in spite of 5 minutes drai ... LG 24 in. LDS 5811 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2280 seconds