Having problems with your Whirlpool ADG 175 ?

How do I open faucets

Code error displayed E1

Answers :

Repair Help & Product Troubleshooting for Whirlpool ADG 175

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My hoover dishwasher both the pre-rinse and wash lights come up and then nothing happens. and in error codes its mentioned faucets not open- longer inlet time. what is this faucets and how do i open it?


... Dishwashers

Dishwasher continually beeping midcycle. Open washer - dishes wet, water in bottom of dishwasher and water faucet sign illuminated. Can anyone advise what's going on? Just checked the water valve to make sure it was open. Thanks.


... Thermador DWHD630GPR Builtin Dishwasher

Error Code E1 means longer inlet time. possible causes faucet is not opened, or water intake is restricted, or water pressure is too low, according to the BRADA portable dishwasher model EP9242AWW What does that mean and how do I fix it? I have shut the water faucet off and the error message still shows.


... Dishwashers

Hi my Candy dishwasher model CDI 1012/2 is filling with water then after a few minutes if bleeps and the error code meaning according to the manual is "Longer inlet time. possible cause Faucets is not open" The tap is fully open and the dishwasher is now full of dirty water. Could you please suggest an alternative cause?


... Candy Dishwashers

Bosch shu9915uc dishwasher when turned on sounds like drain pump is running but water will not enter dishwasher. When opened the pump sound stops. I did have a plumber over right before this occurred to replace kitchen sink faucet but he said he did not shut off valve to dishwasher and valve IS open.


Hello, \015\012 \015\012Welcome to FixYa.\015\012 \015\012 ... Bosch SHU9915UC Dishwasher

I have just installed a ADP5000WH and it successfully completed 2 washing actions. Now when I try to do a third load it comes up with Error 1 which according the manual means longer inlet time and the cause is the faucets are not opened. Nothing has been changed since the first two loads. Can you please advise.


... Whirlpool 24 in. DU920PW Built-In Dishwasher

Newly installed Kohler Vinnata faucet and we can't get water from it. Water was working fine prior to replacing. Installed per installation instructions? Anyone have suggestions? Kohler not open u


Please go on line and question the Kohler tech:www.ereplacementparts.com/kohler-k690-vinnata-kitchen-sink-faucet-parts-c-1... ... Dishwashers

My Bosch ecosense shows a faucet indicator when i open it


... Dishwashers

Hi All, we have just bought and fitted a Hoover HEDS 668-80 Dishwasher. When we tried to run the first wash, the pre-wash and wash light both light up simultaneously. The instruction manual says this means, "longer inlet time", with the possible causes "Faucets is not opened". Could anyone help? Many Thanks. Lisa. :-)


You do not have enough water pressure,, either change the water supply or check the pressure in your house should ba about 70lbs, to work the unit properly,, you could also increase the water supply from 3/8 to 1/2 inch up to the connection of the un ... LG LDF6810 Built-in Dishwasher

Plumbed in new dishwasher wash light and pre wash light flashing nothing happening ! manual says longer inlet time possible cause -faucets not opened?


Hello lozjojo,\015\012Based on your problem description, you either have no water pressure at the inlet valve or the inlet valve isn't operating and allowing water in. Prior to installation, did you make sure you removed ALL the packing materia ... Dishwashers

Candy dishwasher not draining and error code indicates longer inlet time faucet is not open


... Candy Dishwashers

It says the faucet is closed, how do i open it? no water is coming out and everything is plugged in correctly.


Under the sink or pantry counter, follow the hot water pipe or hose that supplies the unit, to the hot water pipe that supplies the sink's taps, you should find a valve, make sure it is opened. \015\012 Jacques. ... Whirlpool Dishwashers

We have a Model 587.1440*, 587.1441* Kenmore dishwasher. I had turned the water off to the whole house when we left for vacation and openned one faucet so the water pressure would be off the house while we were gone. Upon our return, I turned the water back on but the dishwasher gets no water. ?? What happened? It was working fine when we left, now no water. ?/


First, have you run it long enough to purge the air from the dishwasher line?\015\012\015\012Secondly, the solenoid valve for the water inlet may be stuck due to no pressure on it while you were gone. Tapping it with something light like ... Dishwashers

My ADP6000IX has error code 1. Manuel says inlet longer time and cuase may be fauctes is not opened. Can not find what a faucets is in the manual to fix it


Where the water comes in to the machine is a solonoid type shutoff valve. This may be malfunctioning. You may need to remove the kick plate at bottom of machine. You will see where the water supply comes in and connetcs directly to it. When machine ... Whirlpool Dishwashers

Problem: dishwasher (moel MDB6601AWW) will not run. The front panel has a light, between the "Delay 1-9" and "heated dry" buttons, and adjacent to small printed icon (looks like a tombstone with the number 3 inside). Last weekedn I shut off all the water in order to change a faucet, including the hot water feed to the washer. Now the fed to the washer is somewhat frozen -- I can only open it 1/8 turn. So, I wonder if my wife tried to run the machin with no water flow, and it shut itself dow


... Maytag 24 in. MDBH955AW Built-in Dishwasher

FP DD603 fills water, stops error 01 crossed faucet symbol


Hi,I had the opportunity to work on a Fisher & Paykel DD632 dishdrawer a couple days ago. By the way, I am a big fan of Fisher & Paykel equipment--if you ever have the opportunity to work on one, you'll see why. The engineering is ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Fault showing e1,possible faucet problem


WERE THE DISHWASHER CONNECTS TO THE WATER, TYPICALLY UNDER THE KITCHEN SINK, TURN THE HANDLE COUNTER CLOCK-WISE. ... Kenmore 17252 Free-standing Dishwasher

Gives me a water faucet with a slash. What do I


WATER IS NOT GOING INTO THE DRAWER. OR IT IS GOING INTO FAST. EITHER WAY YOU NEED A WATER VALVE. ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

I have a Zanussi ZSF 2420. Every other wash or so the door for the powder does not open. If I actually open the dishwasher to check, sometimes it opens then and the washing powder tab falls out. Sometimes I open the machine and the door is open, but the powder tab has not fallen into the machine. Any solutions to this?


... Zanussi 24 in. ZSF6120 Free-standing Dishwasher

When opening the door to my Kitchenaid Superba dishwasher, I heard a loud noise inside the machine. The door slammed open. Now, it opens, closes, and latches; however, the spring-assist that slows the opening no longer works, and the heavy door, when unlatched to open, swings freely and quickly down.


Well it sounds like you broke a spring,possably a cable you nooe to take off the bottom cover to find what broke. ... KitchenAid Dishwashers

I have a Fisher and Paykel Nautilus DW920 dishwasher. However, the door to the detergent dispenser does not open reliably every load -- usually I have to open the dishwasher door about 20 minutes into the load and open the soap dispenser myself. The catch on the dispenser will have released, but the dispenser door will not have sprung open. I am not sure exactly what the problem is -- the soap dispenser door simply seems a bit stiff in its holster. Given a little nudge, it springs open fine. I h


... Dishwashers

Hi, I'm working on a KUDI02FRSS0 for my neighbor. She complained the door flew open one day during a wash and the door had been very heavy since. A quick check on the internet, and I thought it would be simple... I installed an 8194001 balance kit. Both cords had broken. However, the door was very hard to close, and once you did close it, it would tend to pop open by itself shortly thereafter. When the door popped open, thanks to the new balance kit, it would not fly open as it had p


Is it possible that the door hinges or springs are installed backwards or upside down? Just a guess. Good Luck to you. ... Dishwashers

I have an Amana SofSound 1. When I raised the plastic handle to open the door, I heard a snap, something broke inside and I can't open the machine. 1. how do I open the door? 2. Once open how do I replace the inside broken workings? Thanks in advance.


... Amana Dishwashers

I have a 3 year old stainless steel kitchen aide dishwasher. Recently when opening the door there was a loud "sprong" noise. There is now a cord hanging out the bottom of the door and the "spring" action that makes it easy to open a close is not working. The door opens "heavy" and will go to the full open position.


Hello, welcome to Fixya.\015\012\015\012Based on your desription what you`ve experienced is a broken door closer/link kit.\015\012\015\012It is a fairly minor procedure to replace it/them. Slide the entire unit out from the ca ... Dishwashers

Frigidaire model F71C12PHS0 is not washing, it goes through the cycle and when the door is opened the soap container is open with soap still in it. We have run it with the door open to see if it is spraying and it is. The heat is working because when we open it at the end of cycle it is hot. Yet soap is still there and dishes are not clean. Thanks to anyone who can help me trouble shoot this.


... Frigidaire 18 in. FDR252RB Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0346 seconds