Having problems with your Whirlpool Dishwashers ?

F2 fault showing, what is this? - Whirlpool Dishwashers


Answers :

Overflow sensor . Called out an engineer!
Repair Help & Product Troubleshooting for Whirlpool Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher problem Hi We have a Whirlpool GU 2300, the machine has stopped and is the clean LED on the control panel is showing a 7 pulse sequence which I guess is a fault alarm. I have tried resetting, checked the door switch and looked at the pressure sensor at the drain pump outlet. I changed the heating element and fitted an uprated control card earlier this year. Any ideas?


I solved the reset by pressing the air dry and reset buttons 6 times in sequence, the whole panel array lit and I was then able to reset. I have had no problems since and have used it 6 times. I initially thought that the chipset had a volatile memor ... Dishwashers

F2 fault showing, what is this? - Whirlpool Dishwashers


Overflow sensor . Called out an engineer! ... Whirlpool Dishwashers

Hi my Whirlpool ADP6000WH dishwasher is showing an Error 1 code - longer inlet time so its not getting any water. The tap is definately on and nothing has changed since last time it worked ok with no faults. Possible causes? Thank you.


... Dishwashers

Hi my whirlpool dishwasher (adp 6830) stopped mid cycle,no error code showing, will not reset with a long press to the start button (have prevoiusly been able to reset this way in response to f8 fault


... Dishwashers

I have a whirlpool adp 6535 dishwasher and the F7 fault shows up. Any ideas?


... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

Dishwasher Fault Hi, My dishwasher is a Diplomat ADP8322 (which i think is a rebadged whirlpool unit) & has been playing up recently. When you start a cycle it is fine for a minute or so then it starts beeping, the rinse light comes on & the light next to the start button flashes 11 times, pauses then repeats. I have read online that this flashing relates to what the fault is, but i cannot find out what fault the 11 flashes relate to. The first time this happened i cleaned out all of the filters


... Dishwashers

My Kleenmaid dishwasher stops working after couple of minutes and shows fault code D05. The fault explanationd in the dishwasher manual is "D05 fault - motor under load". Any ideas... Thanks Palma


This means the motor is overheating.Remove the unit and be sure there arent dust bunnies collecting around the motor.Clean really well - and re-try.If the error persists - your only option is replacing the motor.Thanks! ... Dishwashers

Whirlpool dishwasher I have a whirlpool dishwasher model # 665.16519202, and the clean light flashes 7 times then pauses. I was having a problem with the machine working properly right befor the fault code came up and froze it. Can you give me any guidance as to the problem of this washer? Thanks in advance.


If the dishwasher doesn't sense a water temperature increase, it will stop working and lock the functions (clean light flashes 7 times, all buttons are non responsive).To resolve this you will have to reset the console. Do this by closing ... Whirlpool GU2400XTP Built-in Dishwasher

Whirlpool dishwasher fault code f8 e1 - Whirlpool Dishwashers


... Whirlpool Dishwashers

F1 fault both draws on dishwasher are constantly on and dishwasher is showing F1 fault???


Hi . F1 means your machine has triggered the flood alarm. either you have a leak on one of your drawers or water or soap suds has escaped throe the overflow. now the 1st thing to do is turn your machine off at the wall. then leave it for a couple of ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Whirlpool dishwasher Dishwasher is showing F4 and not working. Whirlpool 6th sense ADP7966 its about 2years old.Also can not find this model anyway.


We had same problem with our ADP 5966. An engineer over the phone said he thought it was related to machine being unable to drain. I checked the drainage pipe connection to u-bend under sink, and sure enough, there was a major blockage. Cleared that& ... Whirlpool 24 in. ADP5966 Free-standing Dishwasher

Whirlpool dishwasher I have a whirlpool dishwasher model # 665.16519202, and the clean light flashes 7 times then pauses. I was having a problem with the machine working properly right befor the fault code came up and froze it. Can you give me any guidance as to the problem of this washer? Thanks in advance.


Do a "key dance" between normal and heated dry , going bak and forth six times. this will rester the heater fault. That is the clean light flashing code. Now you have to find the cause. Most likely is that there were suds in the last cycle or the do ... Dishwashers

Whirlpool dishwasher adp 4731/5 showing f4 - Whirlpool Dishwashers


... Whirlpool Dishwashers

My Fisher and paykel dishwasher drawers are showing a F1 fault on the top drawer screen, But it was the bottom drawer that was in use at the time of the fault occured. The top drawer will open but the bottom drawer is locked. I need to unlock this drawer to get my cooking equpiment out. Please Help. I know that the F1 fault is a flood fault but how do fix it.


... Fisher and Paykel Dishwashers

Dishwasher Whirlpool adg 6966, light showing 20 mins even 4hrs and more after finishing


... Dishwashers

Dishwasher does not seem to have power. I have a Kitchen Aid, under counter unit, 9 years old, model KUDS01I. I used it 2 nights ago with no problem. When I push a button, nothing happens, no lights show, etc. It is plugged into the lower half of a duplex socket with disposal plugged into the top. Disposal works, so the problem seems to be with the dishwasher. That also eliminates any issues related to breakers or ground fault indicators, etc. Is there a reset button on the dishwasher? Is there


... KitchenAid Dishwashers

I have a DS605 and DD605, F1 fault comes up everytime I try to cut the dishwasher on also water will emerge in it and the impleller floats up under the rack on the top dishwasher. Both dishwasher comes on the same time and make noise and the F1 with a little rench shows up. They said when the red light comes on the salt reservoir is empty. What kind of salt do I put in.Please advise


... Fisher and Paykel DD605HSS 23 in. Built-in Dishwasher

Dishwasher is model DWD1SSE type11045 Initially the dishwasher leaked water on the floor On investigation the bottom tray under the dishwasher was wet The motor was wet Tested the motor which was fine although the capacitor on the motor impellor was dead. Replaced capacitor, now no water going around the spray heads so found the impellor inside broken. Replaced that. No hoses are leaking. Machine now works fine heats up etc etc but over fills and the E5 fault shows


... Smeg 24 in. DWD1SSE-1 Built-in Dishwasher

Whirlpool Dishwasher ADG 4952 - F2 Fault Code


... Whirlpool Dishwashers

Dishwasher whirlpool ADP 2966 WHM Have fault


... Whirlpool Dishwashers

Baumatic BDW13 14 dishwasher SHowing E3 Fault


\015\012 \015\012 \015\012 \015\012\015\012\015\012\015\012I had the same prob ... Baumatic 23 in. BDW13 Built-in Dishwasher

Whirlpool dishwasher fault code f6


F6 is a connection problem ... Dishwashers

Hi, we have a Whirlpool dishwasher and the er4 fault has appeared and it keeps sounding, is there a way we can reset the fault Thank you


On many dishwashers, the latch engages a switch to activate the timer and other control components. If the latch ... Whirlpool Dishwashers

I have a kenwood dishwasher kdw12sl3a. It shows fault E3. It states in the manual that this fault means longer heating time but not reaching required temp and its a malfunction of temp. sensor or heating element. Is there anything I could do to fix it or will it have to be sent back.


Aye have same problem!? how did ya get it fixed if ya did thanks ... Dishwashers

Item: Whirlpool Ultra Dishwasher Age: 3 yrs Problem: Not enough water to effectively wash the dishes. State: When the dishwasher is started, the fill valve opens as normal. Only about 1/2 the amount of water is let in when the pump turns on and the washing cycle begins. Opening the door shows that the water level does not reach the bottom of the float. When I close the door, the wash cycle begins again but stops after a few seconds. This is when the water begins to fill again. This time, the wat


Larry,The float is generally for overflow conditions and will interrupt power to the fill valve solenoid. If you are not filling completely in the time allowed by the timer, it is most likely a flow restriction in the water ... Whirlpool GU2400XTP Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1311 seconds