Having problems with your Whirlpool Dishwashers ?

I have a Whirlpool dishwasher, Serial #FD3512144. Is it possible to get a bottom rack for it as some of the coating is wearing off and I am afraid the metal will rust & break


Answers :

Since mr computer is on dial-up I couldn't access what I wanted, so I just called the toll-free number and found out what I wanted to know.
Repair Help & Product Troubleshooting for Whirlpool Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Whirlpool dishwasher, Serial #FD3512144. Is it possible to get a bottom rack for it as some of the coating is wearing off and I am afraid the metal will rust & break


Since mr computer is on dial-up I couldn't access what I wanted, so I just called the toll-free number and found out what I wanted to know. ... Whirlpool Dishwashers

Upper and lower racks of Beaumark dishwasher purchased in mid-1990s (model and serial number available) need replacing. Coating on metal racks has worn away and resulting rust is getting on dishes. Replacement racks (new) cost more than the dishwasher itself (figure that!). Can anybody help out with a suggestion?


... Dishwashers

Need a new rack upper and lower for dishwasher M odel #GLDB958AS2 . Both the upper and lower racks are rusted and breaking apart. purchased in 2003


... Frigidaire Dishwashers

GU980 dishwasher I have a buzzing sound when the washer is in drain mode. The manual indicates there might be something in the Power Clean Filter, and that it will go away when the object grinds up. I called Whirpool, and they said the same, and to run for 2-3 cycles to make go away. 2-3 cyles later, noise is still there. I noticed a nub off the rack that looks like an end peice of metal broke off from rust. My guess is it's stuck in the PCF, and will not grind up. I removed the nut, lower spray


The nut holding the inpeller has to come off it is probally frozen\015\012if it snaps off then the pump assy willl have to be replaced or at least the motor, you need to get below the impeller to see what is down there though, or let it run as ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

My dish racks are rusting and I need to replace them is there a way I can order these? Model #PDC3600AWX Serial #29527097EG This is the only problem I am having as the dishwasher is working excellently


... Maytag 24 in. MDB5601A Free-Standing Dishwasher

Magic Chef Dishwasher Model No. DU70AA-01 Serial No. Lr 608472 R I need a new Bottom Rack as mine is rusted. Dishwasher works fine.


... Dishwashers

Need a replacement rack for mine has started to rust through the rubber coating and getting weak


Go to searspartsdirect.com and enter your model number and thumb through the parts lists. It will show you where to go from there. ... Kenmore Dishwashers

Moffat dishwasher The door has come repositioned on the left side and it will not shut properly and when the door is all the wway open, the bottom rack will not pull out smoothly without lifting it up slightly. Haven't tried it since the problem arose as I was afraid that it would leek. also I didn't want to force it back into position for fear that I ould break it. I bought it Aug., 2006. It is a Moffat Model #MHDD210LOOWW.


... Dishwashers

Plastic coating has worn off in several places on top rack. Leaves rust spots on plates.


Hi, They are not that hard to replace and you can easily buy the part online...Here is a tip about how to buy appliance parts online.How to Buy Appliance Parts Online ... Maytag Dishwashers

Maytag portable dishwasher, dish racks are very rusted in 2 years


This is Maytags solution\015\012\015\012\015\012\015\012\015\012\015\012 \015\012 \015\012\015\012 Do the dishwasher racks have chips or scratches showing exposed metal underneath? ... Maytag 24 in. PDC3600A Built-in Dishwasher

How to seal a small hole inside the door of dishwasher from the metal end of the top rack hitting along the inside of the door.


... Frigidaire Dishwashers

Racks rusting and falling apart


Do not know about a recal. But you can buy the racks at your local Sears service senter or on line at www.Sears.com ... Kenmore 15529 Built-in Dishwasher

The flimsy plastic guide wheels on the rack for my (ca. 2000) GE monogram dishwasher have been breaking. Six so far. GE wants $25 - $30 per wheel to replace and $235 for a whole new rack!! I will not reward this rapacious corporate behavior. Is there an appliance graveyard (like an auto wreck yard) where one can get a used rack? Are there wheel manufacturers/suppliers that will sell reasonably wheels of similar dimensions to the breaking wheels? Preferably in nylon or stainless steel, not the cr


We have just solved the problem with our wheels falling off! For .75 cents a wheel we purchased new wheel "clips". The connect straight into the wheel instead of "rotating" on. Big differnence and so easy to change out! 5 minutes and the problem is g ... Dishwashers

Rusted racks Our dishwasher works great, but our racks are rusted. Where can we get new racks? Thank you. Allen


Tip: Always provide the complete information provided on the manufacturers product information data tag, located on the unit, and not in the user’s manual. This will help ... GE GSD2200G Built-in Dishwasher

We have a Maytag dishwasher, MDC4000AWX. Both dish racks are rusted, broken and falling apart in places. How much is it for replacements of these dish racks. Also, so you have any used dish racks in excellent condition. We do not want to replace the dishwasher because it works perfectly. We are just VERY disappointed this this rust problem. What can we do?


The only way to get new racks is to buy them here at link below. Parts #1 and #3\015\012\015\012 ... Dishwashers

Rusted dishwasher racks Maytag MDB6650


... Maytag Dishwashers

I have a BOSCH SHU5312UC/U06 dishwasher ... the upper wire rack is rusted and falling apart. We want to order a new rack and install, but I can't figure out how to remove the end caps on the arms holding the rack in place. Can you help me?


... Bosch Dishwashers

Top rack extra shelf for knife holder clip keeps hitting the rubber seal on the left side when the top rack is pushed into the washer. The top rack is leveled but tends to lean to the left. The seal is wearing at the contact point. I think it's a design flaw. What can be done to prevent it and can the seal be easily replaced?


... Bosch Evolution 800 SHE68M05UC Stainless Steel Dishwasher

TOP ARM HANGING DOWN-Dishwasher's working fine, problem is that the wash arm/spray thing at top is lower than it used to be, we only noticed because when pulling out the top rack the top arm/spray thing at top gets hit by the rack. Work around has been lifting rack up at angle to get past this, but everyone at some point forgets to do this and we are worried eventually something will break. HELP???


... Dishwashers

I have a kleenmaid dishwasher DW35X. The racks are breaking so it can't hold the dishes. I have an estimate of nearly $400 dollars to replace the racks. Not the bottom basket simpley the racks. I was wondering what model Brant that would be and I may be able to get it in from overseas much cheaper.


I usually keep an I out for racks by looking for dishwashers that have been discarded or are being sold cheap but still have good racks, you will have to make sure they fit though some do some don't.\015\012you can also call around to used appliance ... Dishwasher Accessories

Rusty racks The racks of my Maytag MDB4050AWW sn 15638404SZ are all rusting, both uppet and lower. as I am looking to sell my house this is a problem. I would expect the racks to last as long as the dishwaher, I am a single person, so the dishwasher is not used a lot. Jean Whalen


Check your warranty to see if it covers your racks. Some models have a longer warranty against rack rusting if you have Duraguard racks. If they are Dura guard racks and still under warranty, Maytag will replace them at no charge. ... Maytag MDB7100AWB Dishwasher

Buying new dishwasher. will pay more for racks that dont rust.


... Maytag 24 in. PDC3600A Built-in Dishwasher

Rusting racks lg dishwasher


... Dishwashers

Rust spots on bottom rack


You may need to replace the rack. Dishwasher soap is aggressive and once an area is exposed, it will rust fast. Make sure you don't place sharp objects in direct contact with a rack. The action inside the washer can cause them to move and rub thr ... Maytag MDB6650A Built-in Dishwasher

I noticed water coming from underneath my dishwasher so I pulled it out from the wall and found that underneath the factory installed installation there was a screw missing that holds the top dishwasher rack. The hardwood floor and bottom of the cabinet is ruined. While finding this problem, I also found rust on the bottom of the rack. Who do I need to speak with about this problem?


Speak with who you purchased the dishwasher from. They will be able to point you in the direction to get a replacement and file a complaint. All of this is provided you bought the machine in the last year. ... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0351 seconds