Having problems with your Whirlpool Dishwashers ?

My dishwasher door doesn't close properly. It has a panel on the outside and this seems to weigh down the door so it drops. I want to know if the door can be replaced. The model number is ACG9544 (at least I think so, some of the numbers are difficult to see! It could be ADG954 A, or ADG) Can you help?


Answers :

Take the lower pannel off the bottom and look to see if you have a broken spring.you can order a new one on the sears website.
Repair Help & Product Troubleshooting for Whirlpool Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My dishwasher door doesn't close properly. It has a panel on the outside and this seems to weigh down the door so it drops. I want to know if the door can be replaced. The model number is ACG9544 (at least I think so, some of the numbers are difficult to see! It could be ADG954 A, or ADG) Can you help?


Take the lower pannel off the bottom and look to see if you have a broken spring.you can order a new one on the sears website. ... Whirlpool Dishwashers

Kenmore Ultra Wash dishwasher model number 665.1374 or 665.1384 I am a technician. This unit does nothing. It has power and ground. I have tested the door switches. They test good. If I unplug the unit and plug it back in then it will run a drain cycle, at least that is what I think it is doing. The motor runs for about 4 minutes. Once it shuts off, there is no further response. No control indicators illuminate. No response from pushing any of the touch buttons.


... Dishwashers

The door has always made a horrible noise that I could not get to go away (I shot some WD40 into all available places). I learned to live with the noise. NOW, the spring on the door has obviously broken. I am afraid someone will open the dishwasher and hurt a small child with the falling door! I see where you addressed the broken spring problem. Do you think I could fix the horrible noise at the same time? Do you think this is something my husband could fix?


... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

Leaking at bottom of front door with suds and water coming out. Cannot find the model number. Seals on door (3 sides) are fine. Cannot see a seal for under the door.


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\012dafhrw ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

I have a Haier quiet clean unsure of model number can with the house. When you push in the on button all the lights for the type of wash cycle are on and it begins to beep. This did it once on the past when door was opened while running, it seemed to fix it self and have not had any issues until now about a year and half later, thinks daughter opened door during cycle... Please help not wanting to hand wash all my dishes :)


Buy a new one!!! lol ... Haier ESD200 Built-in Dishwasher

I think this is my dishwasher it does not have a number! When i close the door a noise starts then it bleeps but no water seems to come in. When i open the door more than one button is flashing.


... Smeg 24 in. STX2 Built-in Dishwasher

Hi, I have a Dishlex dishwasher. It's an electronic model, from about 92 I think. The model I thought was B8557WW. It is very hard to see the model number because it's almost washed away. Is the model number maybe located anywhere else on the machine? Could there be a manual or circuit diagram hidden somewhere on (in) the machine? The fault is that it wont start. It reacts to some of the front buttons, and beeps, but not all, and not the start button. Before it stopped working completely, some o


... Dishwashers

I have a Maytag dishwasher, model #MDB4100AQ. Is it possible to replace the door panel on this dishwasher? I see the relevant part number (99002109) in various online parts stores, but before I order it I want to make sure this is a do-it-yourself job. I can't see any screws or other hardware that's holding the panel in place.


You may not have to deal with the screws. Check out ApplianceArt.com to see if they might have a solution to fit your needs. I know they have stainlesss options, but also colors and designs. ... Maytag Dishwasher

I have a leak on my Miele G863SCVI Plus on the lower right corner of the door - I think it is the door seal gasket - how do i replace this and is this a difficult task. Do you have the parts?


... Miele 24 in. Incognito G863 SCVi Built-In Dishwasher

Customer bought house with a Viking Dishwasher already there. He has no user manuals or documentation with the model number listed. None of the stickers on the side of the door have a Viking model number. This unit is a Quiet Clean System with Auto Water Heating and is (he thinks) about two years old. How can I find out what the model # might be or better yet how do I find out the part # to fix the main control board / interface. It just keeps blinking.


Check the back of the unit for a tag.... otherwise - removing the clock... it should have a part number on it.\015\012\015\012Thanks! ... Dishwashers

I THINK A SPRING IS BROKE IN DOOR I dont see how to get to it to see for sure


... Jenn-Air JDB7910 Dishwasher

Dishwasher leaking Our dishwasher all of a sudden started leaking. I've taken the front panel off the door and can see exactly where. It's not a hole or anything...it's at the front, left edge of the basin, the bottom left corner at the front. It seems that right after it fills with water, it starts to leak once water is moving around inside and washing cycle starts. It is as if big waves are being pushed to the front left corner and over the lip of the basin. I don't think the water level is to


Just an idea...if i'm understanding you correctly,could the door seal be creased there or folded over by use and age to permit this to happen? cause you said nothing is missing ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

My dishwasher is leaking on the sides of the door and then runs to the bottom, but I think it is leaking down from sides to the bottom, I can see water splashing out from the side, my gasket is not loose or hard, my Maytag is 13 years old


Try cleaning the gasket. Around the bottom they will have a lot of food and soap build. It worked for me .Good luck ... Dishwashers

Hi - I've been all over your web site and keep getting rejected - alas. I have one of those wonderful Fisher Paykell double drawer dishwasher unit Model # 88445 (I think but also see another number LIM725367) I bought in new in 2007 worked fantastic but tore down my b ungalow now have a new kitchen ready for it. Carol 303 320 1697 [email protected] May 6 2011 11:30 AM MDT I would like to obtain an installation manual so I can make sure I packed all the parts and then put it in m


Hello Carol - \015\012\015\012\015\012The full model number for future reference is DD603-88445. I've uploaded the installation manual for all Fisher & Paykel DD603 double-drawer dishwashers to Rapidshare. Please follow the instruc ... Dishwashers

16 year old GE built-in dishwasher, model GSD900. Springs that prevent front door from falling disconnected. ALL parts APPEAR to be in good condition. I say appear in good condition because I don't know what they are supposed to look like. But I see nothing obviously broken. The 2 springs appear intact. The connecting cable is good. However one of the 2 springs is shorter than the other. It may be shorter because one is supposed to stretch to the other side of the dw? So number 1


... GE Dishwashers

My frigidaire dishwasher FDB1502RGC4 will not run a cycle. it will fill and drain the water but will not run a wash cycle. all the lights on the control panel lightup when they should. so i dont think it is a fuse. and there is not much i can see after i opened the front door, the control module and the console assembly. could it be one of these.


Having the same problem with mine, just replaced the discharge pump last week because it went out, worked a couple days now this. still have not figured out the problem ... Frigidaire FDB1502RGC Built-in Dishwasher

Hi My Bosh dishwasher is model SMU 7056UC The water is not out of the bottom of the unit, when the cycle is complete it is still cloudy. What do we do? What part number do we need for the door seal as it leeks ? I tried to down load the manual to see the parts and couldn't.


Hi \012either your dishwasher has a blocked filter or a blocked water outlet. Some dishwashers will reset if you can unblock the pump or outlet where it goes to waste. You will need to bail out the water first, then pull out all the filters and ... Bosch Dishwashers

Follow-up I've removed the lower arm, I'll spend some time and see whether I can get the pobem sorted out. My wife noticed the the detergent was smeared all over the door and repeated tries didn't get it out. Therefore, the water is not spraying. I can confirm the water is filling on the bottom and draining. The heater is working well. I am thinking there is no pressure to send the water through the tubing to the upper and lower arms. The motor is hot to touch (118 degrees with my temp probe). I


... Kenmore 24 in. 15199 / 15194 / 15192 Built-in Dishwasher

Where can I get a black door panel for my Hotpoint Dishwasher.Mod # HDA 200x-68ba. I think the part number is EAP 26126


Go to www.applianceart.com they have all kinds of colors and panel options. they have designs, colors, textures, holiday ones, and even stainless steel. www.applianceart.com ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

On my bosch shu66 diswasher the error code indicates a number 1, aqua sensor I think. There is a screw missing in the soap dispensor and it's been letting water into the door interior. could this be repaired by replacement of the screw and drying out the interior insulation and wiring


As long as it is sealed and you should also make sure there is not water in the white plastic pan under the dishwasher.. ... Bosch 24 in. SHU43 Built-in Dishwasher

My Bosch dishwasher, S9J1F will not clean things properly, I've changed the arms, cleaned it. I think the arms don't seem to spin properly, (I bypassed the door switch so I could see them spin)I have tried new arms though, pump pressure or ?


Not enuff water in it or pump blockage or bad pump impeller. if you ran it with the door open even if the arms didn't turn you should have got drenched is the bottom covered with water about 1 inch deep some times the fill valve screens get clogged a ... Bosch Dishwashers

On my bosch shu66 diswasher the error code indicates a number 1, aqua sensor I think. There is a screw missing in the soap dispensor and it's been letting water into the door interior. could this be repaired by replacement of the screw and drying out the interior insulation and wiring The solution I tried didn't clear the error code on the panel. Is there a reset or do I need to replace the aqua sensor or ? The machine still won't start and displays a #1 on display. There is no water in the whi


... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

The cover of the detergent dispenser does not latch properly and will flip open. The dishwasher is 6 years old and I think we need to replace the dispenser assembly but don't know how to take it off the door and put it back. The model number is GU1500XTKB0 Thank you for your help.


I've posted this before. The latch just needs a good cleaning. In the past, something placed in the washer kept the door from opening properly, which caused detergent to dry under the latch. This has happen several times until I figured it out. Don't ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

Model MD89150Awq door latch is loose and the door is difficult to pull open. The door latch on the dishwasher seems very loose and opening the door is difficult - I have to pull very hard to unlatch the door to open the dishwasher.


... Maytag Dishwashers

Dishwasher will not start cycle it is locked and will not unlock. door panel suggestion says press and hold energy saver dry pad x3 seconds that is not an option on this model. what can we do.... the numbers 8573025 and the other is 8573030 the numbers on the door we also have additional numbers from our user manual that is part no 8269551


... KitchenAid Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1131 seconds