Having problems with your Whirlpool Dishwashers ?
Sanitizing has stopped working. 7 year old
\015 7 year old whirlpool gold dishwasher. the sanitizing setting has stopped working.\015
It could be your heater thermostats wire or the control.if it heats during the dry cycle its probebly your control
Repair Help & Product Troubleshooting for Whirlpool Dishwashers
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Sanitizing has stopped working. 7 year old
It could be your heater thermostats wire or the control.if it heats during the dry cycle its probebly your control ... Whirlpool Dishwashers
I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?
If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher
My panasonic range microwave NN-S255WF started to randomly beeping and flashing the potato/vegetable setting. For about 15 minutes the microwave keypad would not work at all. It is working again. The range overhead light on the bottom of the unit stopped working about a year ago - light will not turn on. Please tell me what the issue is, what would need to be replaced. The microwave is 4 years old. Thank you!!
We get microwaves in our shop frequently, this unit sounds as if it's brain has been damaged, I suspect, as it usually is that either the magnetron, or the High power Diode, has failed, this usually also, "Spikes" the "Brain" as well. At 4 years old ... Dishwashers
Buttons not working, on/ off and dishwasher is less than three years old-see ms like a poor design- Maytag needs to recall or give compensation otherwise company will lose the business. I will never buy any Maytag brand in future. My dishwasher and microwave stopped working. It really frustrating and decided to launch a complaint to maytag soon--Would recommend to stop buying Maytag product in future
... Maytag 24 in. MDBH955AW Built-in Dishwasher
GE GSD6610GOOB not cycling properly. Our dishwasher is about 6 years old and has been nothing but trouble the past year or so. We've already paid too much money repairing it the first time, (it simply stopped working - the control panel was totally dead) and don't want to pay anymore. Current problem - the machine starts up and fills with water and it sounds like it's running OK, then it will just stop, sometimes for a couple of minutes sometimes longer. Then it will start up again - and
... GE 24 in. GSD6600G Built-In Dishwasher
I have a Ridgid 3300 PSI pressure about 1 year old. Works great on pressure but stopped dispensing soap its not stopped up but just wont pump soap out of container, the hose does not have a hole in it
... Ridgid Rd80702 3300 Psi 3.0 Gpm 7 Hp Subaru Ex21fi Ohc Gas Powered
My quiet partner 2 stopped working after 1 year it is now 4 years old when I try to start machine the washing light is on but nothing happens
If I'm understanding your post you have not used this unit for three years and now you want to start using it again? Or you had an issue with it after one year and had it repaired and continued to use it and now it will not work? ... Whirlpool DU1055XTV 24 in Builtin Dishwasher
Hello! I have a Jenn-Air dishwasher (less than 4 years old) that has all of a sudden stopped working properly. It sounds like it's going through a full cycle and the dishes are wet when it stops
... Jenn-Air Dishwashers
I have a Bosch integrated dishwater that is just over 2 years old. It has suddenly stopped working and the tray at the bottom is not emptying, although you can still hear a buzzing sound. The cycle does not go beyond this point. I have emptied the tray of water and the dishwasher will start again, and pump water in, but it then stops, as though it is not able to pump water out. Does anyone know what this is? Could it be the pump? A blockage?
... Bosch 24 in. SHU43 Built-in Dishwasher
I have a Bosch SMU2046Uc/14 about 15 years old. Sometimes it works, sometimes not, for the last couple of months. Now it has stopped working completely as if no power. Checked the breaker. Another problem - one of our kids just today jammed the door lock on it and we cannot get the door to latch at all. Can you help with any one of these problems? How do you fix or reset the door latch??? What else can we check to troubleshoot the dishwasher? Thanks!
... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher
I have a Whirlpool DU1055XTSS dishwasher that completely stopped working. I took it apart, found the thermal fuse to be bad, ordered a new, then replaced it and it worked for 2 loads. Now the thermal is open again. What could be "taking it out"? Is the thermal fuse strictly a thermal or does it repsond to current? It's 2 years old, i have already replaced the heating element, the main control board, and now the thermal....twice.
Hi.If the thermal fuse is blowing, that means that there is overheating.Common causes for overheating are:Thermostat cutting off too late.Plugged element.Plugged element means that the element sta ... Whirlpool Dishwashers
I have a Candy CS 455M slimline dishwasher which is 3 years old. The program button has stopped moving round I put dishwasher on and went to work and it was still washing the dishes when I got home from work 8 hours later. I thought it might have stuck and been a one off but no it happens every time is it the timer? is a new timer easy to fit?
... Candy 17 in. CS455 Built-in Dishwasher
It has stopped working, There is power going into te machine. An engineer from Repaircare said it was the programmer, ordered a new on vcame to fit it said it was te wrong one. Ordered anoter one Whirlopool saaid it was out of stock, on back order. Waited 3 weeks engineer came with new programmer, fitted it it didnt work. Said maybe they can't fix it. Thew nachine is only two years old and a popular make. WHAT CAN I DO???
Hi,I am sorry to hear regarding the problem. You need to have some patience in order to find what's actually work with the Dishwasher. I cannot jump to the conclusion as there might be "N" number of reasons.Now, Fi ... Whirlpool Dishwashers
Have a Whirlpool Quite Partner II DU1145XTPBA 1 1/2 old just stop working no lights will come on at all. There is standing water in the bottom. We have replaced the thermal fuse and still nothing. What else can we do this dishwasher is not even 2 years old.
Re-verify the thermal fuse.If the new wire that came with the fuse was not used the fuse will blow again.Check the door switch for continuity.The power to all parts goes through the door switch first.Open the wire terminal box ... Dishwashers
My dishwasher is working well but makes an intermittent whistling noise, 10 seconds 'on', 10 seconds 'off'. The machine is 2 years old and runs on water from a softening unit (less than 0.7 moles/litre). None of the manual's suggestions has worked. How can I stop this noise? Thanks, Jim.
This is caused by a partially blocked valve or inlet, it is a little blocked, and this sound you hear is the air pushed through it making a sound. You need to clean out the inlet valves. \012\012\012 ... AEG 24 in. Favorit 80860iW Built-in Dishwasher
My dishwasher won't turn on and makes a high-pichted ringing noise. The problem began when our power went out during a storm. The circuit breaker works as the disposal is connected to the same breaker and still works. The nosie stops when I trip the breaker. The unit is almost 6 years old and is a Profile.
... GE 24 in. Profile PDW8280JSS Built-in Dishwasher
Built in model MDB5601AWB- about 3 years old. The touch panel stopped working..no lights would come on when touched. Tried it a couple of days later. Lights came on..finished a cycle. after satying in the wash mode for a few hours. Then lights started flashing on and off. At that point I shut it off at fuse box since I couldn't get lights to stop blinking and haven't trusted to use since
Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. From what you have described it seems to be the ... Maytag Dishwashers
Asko 1385: 13 year old dishwasher stops during cycle. If you push on the middle of the door it starts again. It is like the latch is not working properly but by all appearances the latch works fine. Troubleshooting ideas?
When you latch the door it closes the circuit.\015\012you may have to open the casing of the door to access the switch. it may be stuck or defective. ... Asko 1385 Dishwasher
I have a linea dishwasher model LDW 3SS i think it is about 3 years old , it used to start but not complete the cycle just stop halfway and then would only work if you slammed the door or pushed front of machine and now it wont work at all ???
Even though this is an old issue, I thought it would be good to close out.\015\012\015\012I had the same issue where the dishwasher would stop at two certain point in the program. If I'd manually advance past that point, it would keep goi ... Dishwashers
I have the double drawer dishwasher. It is 3 years old. For about 1 year now one of the programmes - the second one along which is for quite dirty crockery and cutlery (programme is about 99 minutes) - STOPS after about 60 minutes. It bleeps and flashes and the pot wash programme and eco button are on when I open the drawer. Sometimes the programme works right through. No pattern or consistency. Also the dishwasher isn't cleaning terribly well. I've checked the filters as much as I can an
A few things you could do.\015\012\015\012Is this happening with both drawers.\015\012\015\012Take a clean damp cloth and wipe the switches and the inside panel.\015\012\015\012Get a couple of Finish dishwasher cle ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher
My Bosch Dishwasher model #SHU43C06UC/17 in 5 years old and has been working great and all of a sudden last week it stopped working. When you try to start a new load it will start the timer, but the dishwasher won't fill and run. Any Ideas on what to check or what may be the problem?
Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012I would first run a diagnostic to see what error is presented and in turn will direct which way to focus the repair.\015\012\015\012Try this and t ... Bosch 24 in. SHU43 Built-in Dishwasher
Stopped working. Won't turn on at all. Only 2 years old.
Take off the front panel and look for broken wires. The wires have been getting stuck in the insulation and then break.\015\012\015\012Sgt 48 ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher
Amana ADB1500AWW2 3 YEARS old just stopped working no light will not start
... Amana 24 in. DWA73A Built-in Dishwasher
Our EDW5505ESS is less than one year old and has only been used a few times. It recently stopped working altogether and the control panel doesn't even light up. I've checked and it has power from the outlet and to the dishwasher. Can you help
If this unit is less than one year old that means it is still in factory warrenty. I would call for service ... Dishwashers
My kenmore dishwasher will run part way thru the wash cycle, stop and the hi temp and heat dry lights will flash back and forth and not do anything else. When you open the washer it will have water in it that has not pumper out. It seems that the light wash cycle will work after trying the regular or heavy wash. The washer is 1 1/2 years old. model # 587.15259402
First cut power for ten minutes by unplugging power cord or tripping circuit breaker.If that does not work try the following reset.Press in succession:High temp-air dry-high temp-air dry - High temp-air dry-high te ... Dishwashers