Having problems with your Whirlpool Dishwashers ?

Whirlpool dshw won't run-clean bttn blinks 7X-need codes to reset

\015 My Whirlpool dishwasher DUL240 won't run. The clean button blinks 7 times, pauses, blinks 7 times, pauses, etc. It happened once before. I had a repairman come. He punched in several codes, and it worked. $75 for 2 minutes work. I wasn't smart enough to get the codes. Do you have them?\015

Answers :

Hi
\015\012\015\012
\015\012\015\012
\015\012\015\012Thanks\015\012for using FixYa. If the clean light flashes 7 times, pauses, and then repeats. When\015\012the dishwasher doesn't sense a water temperature increase, it stops working and\015\012locks the functions (clean light flashes 7 times, all buttons are non responsive).\015\012It does this as a safety in case the element is broken and feeding electrical\015\012current into the water.
\015\012
\015\012To resolve this you will have to reset the console. Do this by closing the door\015\012and press these buttons in sequence...

\015\012\015\012
\015\012-high temp wash

\015\012\015\012-heated\015\012dry
\015\012\015\012-high\015\012temp wash
\015\012\015\012-heated\015\012dry
\015\012\015\012
\015\012
\015\012All the lights will turn on briefly and the machine will start a diagnostic\015\012cycle. You can press cancel or let the diagnostic cycle finish (1-2\015\012minutes). You should now be able to run the dishwasher as normal. If the\015\012issue returns, you could have a problem with the heating circuit (i.e. element,\015\012thermostat or wiring). It rarely happens but it could also be the door\015\012switch not engaging properly when the door is closed (slightly bend the door\015\012latch down making sure it doesn't hit the door when you close it).

\015\012\015\012
\015\012\015\012
\015\012\015\012Please do\015\012accept the solution if the issue is resolved or else revert for further\015\012assistance.
\015\012\015\012
\015\012\015\012
\015\012\015\012Thanks
\015\012\015\012Rylee
Repair Help & Product Troubleshooting for Whirlpool Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool dshw won't run-clean bttn blinks 7X-need codes to reset


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If the clean light flashes 7 times, pauses, and then repeats. When\015\012the dishwasher doesn't sense a ... Whirlpool Dishwashers

Clean light is blinking, have already killed the power, then called to whirlpool and they walked me through resetting it by pushing buttons, however when i attempted to run it after resetting it, it started to run then went right back to the flashing clean light. i tried resetting it again, and ended up with the same result.


You may a a latching issue. d/w not latching properly. How long does it take before the clean light comes on after you reset it. does it fill with water? if so, then your motor may be defective. ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Reset code I recently had a problem with my dishwasher that required me to use a reset code on my control panel. I can no longer find the manual that tells me that code. I was wondering if anyone knows it as to save a tech call. The error occurs when the clean light flashes. We have checked the heating element and the tech told us there is no problem there, we just need to reset the machine. The error has occured again, but this time because I tried to run the machine right when we came home fro


I believe the reset sequence is accomplished by pushing the NORMAL WASH then HEATED DRY buttons in that sequence two to three times. The unit will enter diagnostics mode, but can be stopped by pressing the CANCEL button. Let me know if this helps. ... Whirlpool 24 in. DU1050SS Built-in Dishwasher

Whirlpool gold, quiet partner III, My dishwasher is not cleaning very well and when it is done it flashes clean. The clean flashing light wont stop. It flashes 7 times and stops for 3 sec then starts again. I know how to reset washer using heated dry and normal buttons but when i run it again when it is finished it goes back to the clean button flashing


... Whirlpool Dishwashers

Whirlpool model du1100xtpq6 machine will not start clean lite flashes 7 times stops and repeats must be code 7 blinks only drain pump runs when drain/cancel button pushed


Hi, this is an indication that the water did not heat properly. Follow this link to some instructions I put together to help solve this and reset the control so you can use the machine again. ... Whirlpool GU1100XTLB / GU1100XTLQ / GU1100XTLT Built-in Dishwasher

Normal wash light blinks, machine will not run. No reset key code exists on the kick plate or inside the washer door panel. I have cleaned to drain hose and hot water supply is ample. Thanks Model 16029


... Kenmore 24 in. 16029 Built-in Dishwasher

KUDI01TJWH0 kitchen aid....the clean light is blinking and wont do anything else....how do we reset or do we just need to take it in for repair?????


I have a kitchen aid 24" built in dishwasher that will not run and the clean light just keeps on blinking ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Have a whirlpool gold dishwasher.The problem is that the clean lite on the control panel flashes not allowing the unit to work.I installed a new disposal and forgot to remove the plug for the dishwasher drain hose.When the flood happened I opened the door in order to stop the dishwasher.Now the unit will not work.The lite flashes 7 time ,then it pauses and flashes 7 times etc.Is there a reset procedure to run in order to get the unit to work or do I need to buy a new control panel?


HI,Can you please give the make and the model no. so that i can give you the manual.Waiting for your reply ... Dishwashers

I have a Kitchenaid dishwasher #KUDK01LBS6.The unit will not run. The ''Clean Light'' indicator on the display panel blinks off and on. I have read that a ''Fault Code'' is needed to solve this problem, can you provide me with one? Thanks! e-mail [email protected]


... KitchenAid Dishwashers

I have a Kenmore dishwasher 665.16022402 that is locked out at the board.( the clean light flashes continually & wont allow it to run) I don't have the manual to find the reset code and troubleshoot. There didn't seem to be any proublems till now.??????? any help?


... Kenmore 24 in. 16032 Built-in Dishwasher

I have a Whirlpool GU2700XTSB1 dushwasher. It stopped one day and cleanning light was blinking. I was able to reset the dishwasher by pressing two of the button 3 times. Now when I run the dishwasher it fills the bottom with water, heats the water and then buzzes. The wash motor does not spin. Any help?


... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Whirlpool dishwasher Quiet Partner II DU1100XTPQ7 Mine runs but will not drain. Took it apart and cleaned out as much as I could around the trap, but could not figure out how to pull out the sump and seal. I believe it may be clogged but need to know how to pull it out or possibly reset it so it will drain.


I have a simular problem but everything quit working even the lights. Is there a reset button. Ive checked to make sure there is power supplied to the dishwaher. Please help. ... Dishwashers

The dishwasher ligh blinks showing that its clean. when i go to load it and start it it wont reset, it blinks as if its clean. how do i reset it. ive turned the breaker off and nothing works.


... GE 24 in. GLD5500L Built-in Dishwasher

My dishwasher seems to be locked up and needs to be reset. the clean led is constantly flashing. i had this trouble in the past, and the serviceman reset the dishwasher by using the touchpad on the front as a code and washer worked again. do you know the code.


Control is programmed to\015\012stop the current cycle and\015\012not allow any further\015\012cycles if it suspects a\015\012faulty heater (no\015\012temperature increase\015\012detected in heated\015\012int ... Whirlpool 24 in. GU3200XTP Built-in Dishwasher

The lock light on my kenmore elite dishwasher #15962990 wont stop blinking. It wont reset to run a cycle. How do I reset the control panel??? HELP!!


Hi\015\012\015\012To reset the control panel press and hold the RINSE ONLY/AIR DRY button for 15 seconds. Hope this helps....please let me know if you need further help.\015\012\015\012Daniel ... Kenmore Dishwashers

My Frigidaire dishwasher keeps getting stuck on clean. We reset breaker, run the dishwasher just fine, and then once it hits clean, it wont do anything, so have to reset again. How can we fix this?


... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Kenmore 665 17033400 Elite dishwasher clean light flashes 7 times and it wont run. i used the reset combination, all lights lit and stayed lit until i pressed reset. Then it started a wash. now the wash seems to be finished, though i am not sure and the clean light is flashing 7 times, pause, 7 times, etc.


That signals an issue with a faulty heater &/or heater drive circuit.(that info comes from their troubleshooting guide)I ran into it this weekend and discovered that the heater coil in the bottom of the washer was broken. ... Kenmore 24 in. 17032 Built-in Dishwasher

I have a Whirlpool DU1048 that started out with a blinking clean light. I reset the dishwasher by pressing the heated dry and normal buttons twice. That worked the clean light stopped blinking. The problem now is the dishwasher seem to be stuck in the wash cycle. I finally have to turn it off after over an hour washing. Is this possibly a heating element problem? is that user replaceable?


... Dishwashers

Model #kudi01flbl6 flashes a 7 blink code on the clean l.e.d. won't reset via common procedures,turning on and off power. I have taken the interior apart and cleaned out many peices off glass, tooth pick and rubber bumpers off cutting boards. Would really like to know what that 7 blinks means. I can't get it to even start a cycle.


... KitchenAid Dishwashers

I have a Whirlpool Gold Quit Partner III, model GU1100XTLB1. When I run the normal cycle it functions well until near the end. At that time the unit stops and the pots&pans indicator light blinks. If I hold the cancel button in the unit drains then refills and the light starts to link again. I don't know how to reset this unit because I only have air dry. If I leave the power off for a day I can get the unit to reset. If not, it just fills back up with water and the pots&pans starts blinking aga


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Whirlpool dishwasher model #DU1100XTPSB wont work and the clean button flashes 7 times and pauses, any idea? I shut the power off to it at the breaker to see if it would reset, didnt work


... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

I have the Whirlpool DU 1100 dishwasher and the clean light kept blinking. I did the heated dry, normal combination and got it to run through the diagnostic check and sure enough it cleared the lights and appeared ready to run. When I would start it up again it would run the water and then get to the soad wash cycle and stop. No more lights it just stopped. I have been through the diagnostic process 3 times and still same problem. HELP


... Whirlpool Dishwashers

I have a Whirlpool Quiet Partner I (DU920PWKQ0) that the detergent dispenser door is not opening to allow the detergent out during the cleaning cycle. So, the dishes are not being properly cleaned. I do not regularly run a dishwasher cleaner through the dishwasher like some sites recommend. Is this problem more related to cleaning than mechanical ..... If it is a mechanical problem, can I take the door plate off the inside of the dishwasher and get parts if needed??? without a service vist? Than


... Whirlpool Dishwashers

Hi. Got a dishwasher from IKEA - Whirlpool DWH B00. It wont run anymore, 2 years old. It just wont start up, it starts to give a beep, and the solution is to press the <|> button for 2 sec, then restart it. But it still wont start. I've cleaned all filters, checked for water on board underneath, and given it some salt - no luck. Any ideas?


... Whirlpool Dishwashers

Whirlpool gold I have a whirlpool gold and the clean light keeps on blinking also wont work at all, can you help?


First press your "Sani-rinse" button and the your "Heat Dry" button and toggle between them a couple times. This will reset your control module. If the clean light continues to blink then it means that your heating element needs replacing.  This ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2104 seconds