Having problems with your Whirlpool Dishwashers ?

Our dishwasher is 22 yrs old and we just noticed today that the dial is not advancing. Is that part replaceable?


Answers :

The part is replaceble if you can find one but chances are that something else is going to go bad soon,i had one that lasted 20 years and i called Whirpool for parts and they told me i could get parts but the dishwasher was past it' expected life,they told me 10 to 15 years is about it for it,the parts cost so much to replace with time involved,it maybe time to consider getting a new one..
Repair Help & Product Troubleshooting for Whirlpool Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Our dishwasher is 22 yrs old and we just noticed today that the dial is not advancing. Is that part replaceable?


The part is replaceble if you can find one but chances are that something else is going to go bad soon,i had one that lasted 20 years and i called Whirpool for parts and they told me i could get parts but the dishwasher was past it' expected life,the ... Whirlpool Dishwashers

We have a bosh shx46l dishwasher and it has been great and exceptionally quite up to today when we noticed a humming kind of noise around the pump area everything seems to still work as of now. Our dishwasher is only 4 yrs old


... Bosch SHX46L15UC Dishwasher

My ADP 542 Dishwasher is not heating water and dial isnt moving through the cycle. Is thi cos element is gone? Is it worth replacing? Machine is almost 7 yrs old


... Whirlpool 18 in. ADP530 Free-standing Dishwasher

I have an Asko Model 1473/1503 with the word excellence on the front door panel. It is approx 14 yrs old. I noticed that the main switch has been failing and that I have had to giggle it about to latch. It has now completely given up the ghost and there is zero power to the dishwasher. The CB is on . I believe I have to change the main switch but I have no idea how to get at it to remove and replace it. Any ideas?


Http://www.repairclinic.com/smartsearch.aspx?SearchText=`Basko&gclid=CLuI1p7BypcCFQwNGgodD3kkSw\015\012 Call these guys, ther may be a diagram on their site, but I have called them several times in the past and they knew almost immediatlly ... Asko Dishwashers

When dishwasher drains the water not all the water is drained. Some stays standing at the bottom and starts getting an odor after awhile. This is a replacement dishwasher in a 35 year old house. How important is the air release part in the draining situation? I was told by someone that the newer dishwashers have the air release part which was not hooked up on this dishwasher when installed last year. Are there some other possibilities of things that can be checked. Model Number is DU


... Whirlpool DU1055XTS Built-in Dishwasher

We have a 6 year old Jenn Air dishwasher model JDB2150AWP We had a cracked door close unit which we replaced but got a short while restoring connections I am wondering if there is an internal circuit breaker, relay or fuse on these machines that we need to check and possibly replace since we cannot get it to run at all. No power or lights at all. I believe all connections are secure and we replaced the door close unit with new parts.


... Jenn-Air 24 in. JDB2150AWP Built-in Dishwasher

I have a Danby dishwasher model 1802W-1. I ordered a new upper rack because the wheel broke. The old basket was accidentally thrown out before I could remove the upper spray assembly. Is there a kit replace? What parts would I need to replace?


... Dishwashers

I have an Electrolux dishwasher model EIDW6305GS1. It's been broken 3 times in a year! The error code 03 is on now, meaning that the wash pump is bad. How hard is to replace this part? How long should this part be expected to last? This machine is only a year and a half old. Thanks


... Electrolux EIDW6105GB 24 in Builtin Dishwasher

Whirlpool dishwasher part #3385181. Machine had gone thru wash cycle and was starting to dry. Smelled electrical burning smell, opened washer door and washer was filled with smoke. Turned everything off, cleared smoke, and the washer water dispenser is very hard to turn. Washer has symptoms of burnt up motor that turns water dispenser. Machine is 12 years old. With cost of replacement motor and possible part (pump?) that might have clogged and caused motor freeze up, is it worth fixing or junk


... Dishwashers

The dispenser on a Maytag Dishwasher Model WU502 is not working properly. Is there a way to clean it or does it need to be replaced? Since it is an old model can the part be replaced and if so do I need a specialist to do it?


... Maytag Dishwashers

Our GE dishwasher (5 yrs old, Model GLD4250L00CS) only fills with water half way when the unit is started. The inlet valve was replaced with a new one, but that did not solve the problem. When started, the dishwasher fill cycle runs for 41 seconds before the wash cycle begins. Repair workers told us we probably need a new ECU (Electronic Computer Unit). My questions are: Is 41 seconds the correct time for the fill cycle for our model? What else could be the reason for the unit not filling pr


Hello &\015\012Welcome to FixYa\015\012\015\012Check this\015\012 ... Dishwashers

I have a Bosch dishwasher that is about 4-6 years old (model SHU8805UC/U12). A few days ago I found clear water in the tub hours after the wash cycle had completed. I drained the tub by resetting the cycle as instructed in the user manual, but the tub gradually filled up with water again after several hours.. will replacing the inlet valve solve this issue?according to what I can tell for my model the water valve assembly (part No. AP3783031) is the part I need. How difficult and expensive


Just pulled mine out last night. You have a different model but it should be the same. Remove the bottom dress panel and detach your inlet hose from the water valve assembly (have a rag handy to catch a little water). Two torx screws on the front ... Dishwashers

I have a three year old Whirlpool Dishwasher DU1148XTP which is making a load flickering noise when it release the soap during the wash cycle. I removed the front panel and looks like it small solinoid that had a part number 91127.00.1404504 120V 60Hz making all the racket. So my question is could it be as simple as just replacing this part or is there more to this problem?


Yes due to voltage fluctuation you need to change the fuse..... ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

The soap dispenser on my ASKO Model 1805 Dishwasher broke, we got a replacement part from ASKO but can't figure out how to get the old one off to replace it?


Hello,\015\012\015\012Remove the outer door panel, the screws around the edge hold it on. The soap cup will depending on serial break be held down with metal flanges or small screws. Bend the flange or remove the screws and push the soap dispe ... Dishwashers

I have a whirlpool dishwasher model adp 5550 condenser. The dishes do not get clean. I have had a repair man out twice and he replaced the soap dispenser on Friday but it still doesn't work. I went to the store today and bought every cleaning things I could find for dishwashers and also started to investigate online myself. I took the arms off and cleaned them, I took the filter out and cleaned it, and then I noticed that the plastic bar that runs from the top, along the back and into the bottom


... Dishwashers

I have a maytag dishwasher mdb5600awb. it is about 5 years old. it does not clean anything on the top shelf for the most part. i took everything apart and found nothing that was clogged. we tried a rinse agent and that didnt help. for 460 dollars i expected more out of this. i also had the motor replaced 3 years ago. can someone give me an idea why i cant get my dishwasher to wash dishes?


Replace the dock at the back if it is missing a piece. That solved my problem with the top rack not getting clean. ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

We have a Blanco BFDW 650S dishwasher approx 6 years old. We have been quoted over $450 to replace the inlet valve. Is it worth spending this on a machine this old? Am I being overcharged for this work as I can buy the part for $165? Is this something I could do myself? Can you recommend any tradesmen in the Brisbane area who can do this?


When you buy Bosch, you buy quality, quality costs, it is that simple. That price for you valve is a bout normal, but there are other consumables that are used as well, as travel, and labor. etc. You need to contact your Bosch agent in your local ar ... Bosch 24 in. SHU43 Built-in Dishwasher

Whirlpool dishwasher: Model DU920PWKT0; 8 years old Lately, have noticed not full drainage of water at end of cycle... about 1 inch standing (thus 2 inches at the sump). Glasses have had noticeable film on them. Ran the rinse cycle a number of times to explore problem. When I interrupted the cycle, the water on the bottom was soapy, yet no new soap had been introduced. I even colored the water "left" in the tub to see if it was replaced by fresher water. Although it was going through t


Find the 'tech sheet' behind the front 'kick plate' of the machine. This doc will give you a troubleshooting procedure for that specific machine. Check drain line and make sure it's clear and not kinked. Is filter clean?Has machine ... Dishwashers

My fisher paykel dishwasher DS6031 started beeping and would not stop(not during use). I turned off the power for 20 seconds. The beeping stopped but the unit appears dead. The only manual recommendation is to replace controller. The dishwasher is approx 7 years old. Any ideas on part #, price, is it worth fixing?


... Fisher Dishwashers

Hello, We have a Kitchen Aid by Hobart- Regency portable dishwasher. The problem appears to be in the - dial to start operating. None of the positions work without pushing on the dial. Which is impractle. I guess the machine is at least 20 yrs old. Thanks Dave -- [email protected]


... Hobart Dishwashers

Have a GU 2200 3 years old dishwasher, is leaking from the water inlet intake,where can I find the replacement part and the part number.Is thre any instructions to do it myself.


... Whirlpool Dishwashers

I have a kenmore quiet guard standard dishwasher. About 2 weeks ago it started leaking. today I pulled it out and found that looking straight ahead at the door on the lefthand side under the bottom is 2 small wire metal fittings that screw up into the bottom of the dishwasher. one was loose and dripping water. when i screwed it back in i noticed that it was stripped out. can it be replaced or should I scilicone around it to stop it?


... Dishwashers

On 2/18/09, I had a part replaced (due to a recent recall issue) on our Bosch dishwasher, SHU43C06UC. I had not had any problems with my dishwasher - ever - and, since the replacement, my dishes are not being properly cleaned. The Sears repairman who replaced the part tells me that the part he replaced has nothing to do with my present issue and, because my DW is no longer under warranty, I would have to pay for any further services he may provide. 1) What do I need to do to troubleshoot this di


Http://www.boschappliances.com/safetyrecall/dishwasher/default.aspx?pid=BCH0905OIQ001 ... Bosch 24 in. SHU43 Built-in Dishwasher

I have a kitchen aide dishwasher ~ only about 6 yrs old ~ and it's the higher end model with the Wood panels , anyway , Its leaking water on the bottom ~ Is that the main seal ? and How hard is it to replace /


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If you have nuisance water leaks around the base of your\015\012dishwasher, you may be using a detergent ... KitchenAid Dishwashers

I need to replace the large gasket in the front of my Whirlpool Gold dishwasher. I have the part W10082795. Is there a trick to it or do I just pull out the old gasket and wedge in the new one?


Take exact center of new gasket and start installing at the exact cent of top of door. very simple. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2453 seconds