Having problems with your Whirlpool Dishwashers ?

I am trying to attach electrical cord to new dishwasher. The cord only seems to have the green wire in a colored sheath. Does it matter which wire on the cord goes to which color in the dishwasher?


Answers :

YES it does. Green goes to ground or bare copper wire, white goes to white, and black goes to black.
Repair Help & Product Troubleshooting for Whirlpool Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am trying to attach electrical cord to new dishwasher. The cord only seems to have the green wire in a colored sheath. Does it matter which wire on the cord goes to which color in the dishwasher?


YES it does. Green goes to ground or bare copper wire, white goes to white, and black goes to black. ... Whirlpool Dishwashers

I am trying to wire up my Kenmore Elite Dishwasher and are unsure of the color wire goes to neutral, and which color wire goes to ""L"" and I do kinow the bare copper wire goes to ground, can you help??


The wire color going to L1 should be black or red and white would be neutral ... Kenmore 24 in. 15932 Built-in Dishwasher

The power cord in my install kit for the Kenmore 1344 dishwasher, isnt color coded. The power cord is 3 leads of course but the manual says nothing about which lead to connect to the color coded wires coming from the DW. halp?


It does not matter what lead goes to the white or the black. You just need to make sure that you have the ground in the right place. If it is a flat cord then the center wire is the ground and if it really matters the lead on the right of the ground ... Kenmore Dishwashers

What color wire goes to pig tail wire - Dishwashers


... Dishwashers

My LG Dishwasher LDF7932ST has White, Black and Green wires coming out of the unit, no problem there, however the ALL Grey Cord that was in a separate bag does not help me identify which wire is white and which wire is the black, I can only see that the green wire is in the middle of the three attached to the grey cord as I can just see a little bit of green, how am I suppose to know which ones are the other two? I tried pullilng back the grey rubberized cord to see if it was show me ... but no


Hi,\015\012\015\012There is a simple way to tell is to look at the plug end of the cord...\015\012The blades on the plug will be two different sizes...\015\012The blade that is the larger of the two will be the white wire... ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

My dishwasher did not come with power cord. what kind of cord do it need and how do i connect the cord? On the new cord how will i know which one to connect to the white and black wire? The dishwasher is Whirlpool model du930pwsb, Sku numbmer 451-5344.


120 Volt 16 gauge, 3 wire power cord.\015\012\015\012Brass Screw is Black, White Screw is is Common, Green is Ground....Try Home Deport for a cord. If no screws are on the dishwasher, use wire nuts and elec. tape ... Whirlpool 24 in. DU930PWP Built-in Dishwasher

Which of the two wires conecting power cord in dishwasher is the hot wire


... Kenmore Dishwashers

I am doing the electric connection for the dishwasher and the green wire goes where. I see a green wire located on the bottom of the motor area and was wondering if that whewre it goes.


In the conection box the is a green screw that you should attach the green wire to should be in the front right hand corner ... Dishwashers

I have a frigidaire dishwasher model fdb750rcc1. The wires somehow came loose while trying to fix the handle. I found a place for each wire via the wire diagram, however there is a green wire loose and I cannot figure where this wire goes.


... Frigidaire 24 in. FDB750RCC Stainless Steel Built-in Dishwasher

I have a DW475 delongi dishwasher, the water system has gone on it, I have the replacement part, what I want to know is for the wiring does it matter which side on the terminal block the red and pink wires go and the single pink wire, there is a terminal on the terminal block with a blue line underneath it is that for the red wire or live wire?


I might be able to help you out if you can link a picture of the terminal block. however, based on your description i would say it's for the red wire. ... Dishwashers

My Indesit dishwasher needs to have the micro switch aquastop replaced but not sure which wire goes on which contact on the switch. Two wires , one pink and one brown.


... Indesit 24 in. DI67 Free-standing Dishwasher

Smeg dishwasher the same problem interference suppression filter part number F3CF70002L is gone. Where can i get one in uk? Can it be another problem with this dishwasher if this part is broken. Can i run without it. If yes how to conect wires 4 colors brown and blue in the lead and red and white in the dishwasher?


... Dishwashers

Trying to wire cord to asko dishwasher, model D5424


... Asko D1976 Built-in Dishwasher

I replaced the heat element on my dishwasher and now it shows a bad wiring or bad element code where can i get a color coded wiring diagram


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

FRIGIDAIRE DISHWASHER MODEL NUMBER GLD2450RDB0. FOR PUMP ASSEMBLY WIRING, WHICHCH WIRE GOES TO TOP. PURPLE OR WHITE?


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

My smeg dishwasher is stuck on soak doesn't matter what cycle I try it goes back to soak there is no water in the dishwasher tho


... Dishwashers

I have a new timer unit for my ariston LS2020 dishwasher, dont know what color wire go on what wire tap on the timer. The new timer c00057632 is not same as the old .


... Ariston Technologies Dishwashers

I need a user's manual for SGS5302 bosch dishwasher. Otherwise would you tell me exactly how the aquastop works? Is there any method to bridge it? What goes on the wires? Signals from or to the dishwasher?


Please rate this solution if you find it helpful. Thanks!\015\012\015\012The Aqua-Stop function is a flood protection feature. You really don't want to be "bridging it"!\015\012\015\012It works by using a float switch to detec ... Dishwashers

Little particles of food always end up stuck on glassware, no matter how well I rinse everything that goes into the dishwasher. Also -- the rinse aid dispenser no longer stays closed. The dishwasher is about 6 years old.


This washability problem is caused by several things . 1 old dergentent .. i would only use powder . liquid doesn't work as well . use jet dry. and heat in the wash (hi tempt wash) if if your water is hard no heat in the dry .... th ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

My dishwasher will fill with water and then when it goes to run it just pulses. The lights go dim in my house and the dishwasher acts like it is going to start, but it never kicks in. It doesnt matter what cycle it is on.


It sounds like your main pump motor is either locked up, or may be partially shorted. ... Kenmore Dishwashers

I took the front off to try and clean. When i did the wiring came unplugged. They are not color coded. So i don't know what wire goes where. Need diagram to put back together. This is on a Mcculloch fh160b pressure washer.


... McCulloch Pressure Washers

There are cut wires and no cord for the second hand dishwasher i purchased and I need to find out what wires I am connecting and where


There should be a small junction box under the dishwasher behind the front toe panel. There should be three wires:\015\012\015\012BLACK - HOT (120VAC)\015\012WHITE - NEUTRAL (0 VAC)\015\012GREEN - GROUND\015\012\0 ... Maytag 24 in. MDB5601AWS Stainless Steel Built-in Dishwasher

The supply water connection on the bottom of the dishwasher has an ever so slight leak. Not the compression part, but the larger connection that goes directly into the dishwasher. The directions say not to overtighten, but how tight is too tight, or too loose is too loose for that matter? I know the components are brass. I wrapped the male end with teflon tape. I know it is not supposed have any leakage. Need some peace of mind please.


Hello, W/D here.Sometimes you just have to pull the fitting back out, and start again. That's about where we are now. Shut the water off, disconnect the supply line and remove the fitting from the dishwasher. Clean the old teflon off of the ... Maytag Dishwashers

GE dishwasher wire colors


... GE Dishwashers

My dishwasher starts no matter what cycle on a 2 hr hold, it doesn't hold it goes ahead with the wash cycle. And it won't shut off when the cycle is finished. Sometimes it starts like it's supposed to but most of the time it just has a mind of it's own.


... Bosch SHU5307UC Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2264 seconds