Having problems with your Whirlpool Dishwashers ?

My Whirlpool ADP7000 dishwasher is not washing properly and is displaying E3 which is a heater element problem. I opened the front cover to have a look and some wires came loose, so now I also need a

\015 ADP7000\015

Answers :

Repair Help & Product Troubleshooting for Whirlpool Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Whirlpool ADP7000 dishwasher is not washing properly and is displaying E3 which is a heater element problem. I opened the front cover to have a look and some wires came loose, so now I also need a


... Whirlpool Dishwashers

GSD4911X02SS leaks from the bottom. Opened the bottom cover to see where the leak is and it looks like it's leaking in two places. The leak is ont by the door. It looks like the leake is by the pump or motor dripping down. The diswasher still works, but the leak needs to be fixed. Also I have pictures if you need to see


... GE 24 in. GLD6200L Built-in Dishwasher

Need a service/repair manual for a Bosch SGS0905AU/01. The machine is completely dead (no display) after a burnt smell came from it. On the pump motor is a broken/melted brown attachment with a broken ceramic(?) disc inside which looks like some type of capacitor. I really need to know what this is/was so I can replace it. Also, need to know whether there is another fuse somewhere in the machine as that has most likely blown as well. TIA


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012While I can provide a overall Bosch service manual if you post an email address, Based on your description I'd say the issue actually with the motor start relay and consiquently the control...as ... Bosch Dishwashers

My dishwasher recently started leaving a white, chalky residue on all the dishes. It wasn't gradual at all. One day everything was fine and all the dishes clean and the next they were covered in nasty residue. We've ruled out any issues with soap, rinse agents and hard water. A appliance repair guy came out and said the float was "tampered" with and said that he fixed it. He said that if the problem came back we need to order a new float assembly kit. My husband has looked at it several times an


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Whirlpool Dishwashers

I have a dishlex global 300 on which I removed the front cover a black wire came loose and I didn't know where it came from thanks to jyackle5 I have fixed that issue. The problem I have now is the eco light flashes and that's it (nothing else functions). I removed the front panel as the bottom door seal had blown and junk oosed behind the front panels I washed the junk out and cleaned the hole washer while I was at it the bottom of the washer (where the heating element is) over filled so I tipp


Easy fix, Use a bit of force and pull the dishwasher out.Get a few towels and tilt to the left. Water will drain out. Push back in. wait 10 mins and turn on.\015\012\015\012\015\012\015\012Regards ... Dishwashers

Elite 665.13933K010 The touch panel is inactive. There appears to be no power to it. It has done this before twice...the first time I bumped the top of the door and the lights came on and it worked. Second time, I took it out of the cabinet, turned it upside down and examined everything looking for a loose wire or blown fuse. When I put it back together it worked. Any idea what is happening?


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Bosch repair tech's came to look at this dishwasher, he said the control module blew out and they need to order one, they also said it wouldn't be in until mid Decemeber. Is there one specific control module for this unit ?


... Bosch SGE63E05UC 24 in Builtin Dishwasher

We need to connect it back to the built in wires in the dishwasher. We need to know what colours or wires connect to the flat gold metal plates, there is a black plastic case that slips on and then 3 plates underneath and on the top, but not quite sure if that is correct. Then there is still wires that are loose that need connecting. Part NO. C00059727 Copreci - Merloni 1 160010266 TD02 0008


... Dishwashers

I have a frigidaire dishwasher model fdb750rcc1. The wires somehow came loose while trying to fix the handle. I found a place for each wire via the wire diagram, however there is a green wire loose and I cannot figure where this wire goes.


... Frigidaire 24 in. FDB750RCC Stainless Steel Built-in Dishwasher

Good day We are also looking for the wiring


... AEG 24 in. Favorit 40260i Built-in Dishwasher

Hi I run a restaurant and have just purchased a used Hobart Hi-Temp Dishwasher but it came without a manual and I want to hook it up. the model # I can make out is AM-12 it also came with a booster, could you give me a parts list of hook up and also is this a 3 phase or 1 phase and what is the amp load what conductor cable to use, sort of info I need Dale


Since your question requires a lot of typing i.e. complete manual which is not feasible over here. Hence, I am offering few links from where you can get your owners manual. Hope this will solve your problem.\015\012 ... Hobart Dishwashers

Whirlpool dishwasher: two loose wires need to be reconnected. Unable to determine which termings to reconnect the two loose wires.


If both wires go too the same switch/componet and these are the only two wires that connect to this componet it doesn't matter which wire goes where. ... Dishwashers

I took the front panel off my global three hundred and as i did a black double wire came off but i don't know where it came from it has a white cover on it the white cover has a round opening


Hi, i'll try to help. The two black wires with the white connector...Is the connector a spade connector with a number imprinted on it? Do the wires have any markings or numbers? It seems that this connector goes to your door lock switch. ... Dishwashers

KitchenAid dishwasher Hi I have kitchen aid kds 20 dishwasher around 25 years old it has a broken motor and I was trying to put a new motor in it,the old motor has 3 wires white,black and ground but no extra startrelay. the new motor (partno: 4171686 from whirlpool) has 4 wires white,black , yellow and ground , also in package was startrelay but no wiring info for this motor. I Need wiring info if someone can help. Regards. Bjorgvinj


... KitchenAid Dishwashers

Moved my dishwasher and the wires came off need to


... Kenmore 24 in. 16269 Built-in Dishwasher

I took the front off to try and clean. When i did the wiring came unplugged. They are not color coded. So i don't know what wire goes where. Need diagram to put back together. This is on a Mcculloch fh160b pressure washer.


... McCulloch Pressure Washers

Hi i have a gerni compact pressure washer and need to know how to wire it up. The motor(240 Volts) has red, blue ,white and black wires. There is also a starting capacitor. Thanks


... Pressure Washers

Hi there My Bosch Exxcel Dishwasher is tripping out the fusebox RCD and I think there is an earthing problem. It will run for 3 or 4 minutes and then the house alarm goes off and the cooker clock needs resetting! I have tried to look in the back but don't know how to remove the panels. I've tried tipping it to 45 degrees to see if there is any water in the innards but non water came out. I have no idea what to look for - and no manual to help me get inside the beast! Thanks in advance.


It will probably be the water heater element is failing and shorting out.\015\012\015\012Be careful as you do not want to electrocute yourself ! ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

DD603 F1 error code W wrench. This had happened before and it cost me better than $200 for the tech. to discover a loose wire. Looking for directions on how to remove the front panel to access the wiring harness.


To remove fron pannel:Pull the drawer out.on the side at bottom there is a plastic nut on both sides.Use a long nose pliers to pull them out. The Front panel needs to be pulled down 1/2 inch and pull out to the front. R ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My power button cover broke on the dishwasher and I figured out the part number I needed, but when I put it back together I got the wires crossed on the board and door switch. Now the control lights up , but the dishwasher will not run a cycle. THe question is does the plug on the door switch have to be a certain way, because there are three wires and you can connect the plug both ways. I did turn the plug, but it still does not run. Did I break the switch? Bosch SHU9956uc/14


The wires do have to be a certain way on the door. Otherwise a door open can tell the board that's it shut and vice versa. The easiest way to do it, is test the switch with an ohmmeter, place the meter on the switch, push button in and see if the rea ... Bosch SHU9956 Built-in Dishwasher

Maytag Dishwasher I need the reset sequence for my dishwasher. The power comany had turned off the electric to the house to make chages elsewhere in my house. When the electric was turned back on all appliance came back on except the dishwasher. The dishwasher has a front panel touch pad and three of the panel lights are flashing. I know there has to be a sequence to reset the machine. I also need the peace and quiet in the house since I am the husband and am suppose to know it al


We have a model mdvtt53aww1 and you can push three buttons and will light up the hi temp wash, heated dry and sanitize is there a code make it start ... Dishwashers

We getting the error message LE on the dishwaser model #LDF6810ST. The repair Official repair man that came out to supposedly fix the dishwasher called LG to find out what was wrong with it and they told him to tell us that we need to replace the motor and wiring harness and the Technician told us to order the "motor and wiring harness" charged us $100 and left and the dishwasher that is only 2 years old and we paid a little over $800 for is still broke. Now when trying to order the "motor and w


Motor assy pn# 4681ED1004A is the motor you will need. ... LG Dishwashers

I have white crusties with black spots in all along the seal on inside of door, and along filter on top left side of door (inside). and also i use jet dry and my glasses and dishes are coming out cloudy looking. also i have to fill the rinse agent every wash instead of monthly. Is there any special cleaning that needs to be done to this?


Problem is your water. that is from the calcium in the water. go to www.dishwasherfilter.com and get the filter system . it will make your dishes sparkle and help clean out ... Whirlpool GU2400XTP Built-in Dishwasher

A round band came loose during a wash. It is a think black rubber-type band. The band is in tact it just need to be put back on, however i dont know where it came from. Dishwasher is a small version if that makes a difference.


That sounds like it came off of your small apliances (blender, food prosecer...) there is not any rubber washers on the inside of 99.9% of dishwashers becauss thay can melt in the heat. ... Dishwashers

Whirlpool "Quietflight II" - Will not start. The button for "Delay" works, and the button for "Cancel/Drain" works. Pressing this button will drain the unit. No other buttons will work, however, and the unit will not start. Ideas? I've taken the control panel off and looked at it's guts, as far as I can tell everything looked ok (not burnt and no loose wires), although I am no electrician....


Have you tried testing the control panel with an VOM meter? You can press a button and test the wiring that would go to that particular circuit. See if you get a reading on the specific wire when that particular wire is pushed. Does sound like a cont ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1076 seconds