Having problems with your Whirlpool Dishwashers ?

Whirlpool dishwasher model # du945pwp02 will not turn on


Answers :

Repair Help & Product Troubleshooting for Whirlpool Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool dishwasher model # du945pwp02 will not turn on


... Whirlpool Dishwashers

I have a Whirlpool dishwasher (model DU890SWKQO). I turned it on and for a few minutes only the motor was running, no water. I opened the dishwasher to stop it and turn it off, then on again. When I opened it, the was an odor (burning or heat smell) and it was foggy (steam or smoke, not sure which) inside. I am assuming I did not turn the dial correctly so it only 'clicked' on the motor. Concerned now that the dishwasher is broken or concerned that it's not safe to use. Was the steam/smoke


... Dishwashers

We have a new Whirlpool Dishwasher Model GU3200XTVY3, serial # F00404693 bought in April 2010. Yesterday,when we pressed the "normal" button, it started flashing then when we pressed the "cancel" button, it started flashing also. The dishwasher will not start when we pressed the "start" button. We tried to reset by turning off the power to the dishwasher and then turned it back on. All lights were off and then we pressed the "normal" button and it started flashing again. When we tried to pr


... Whirlpool 24 in. GU3200XTPS Stainless Steel Built-in Dishwasher

I have a Whirlpool dishwasher model number DU1055XTPQ4 that is not cleaning the dishes. When the dishwasher is working, the bottem arm is turning and water comes out the holes. The middle arm has some water coming out, but does not turn. The top arm does nothing. It appears I have a pressure problem. I took out all the arms and cleaned them, along with the plastic tube that feeds them water. They had some build up on them but not much. I have the same result as before. I took off the


... Whirlpool Dishwashers

Whirlpool Gold Quiet Partner Model # GU980SCGQ2 The dishwasher normal light flashes on and off continually. The dishwasher won't stop cycling now, everything seems to work normally other than it won't stop cycling. I've attempted turning off the breaker- no luck. Attempted resetting the dishwasher- no luck. Any assistance would be appreciated. Is this a problem with the control module? The thermal fuse?


... Whirlpool 24 in. GU980SCG Built-in Dishwasher

I turned on my Whirlpool dishwasher last night before I went to bed. It is a model number DU915PwP82. Sometime shortly after that, a water line broke in my neighborhood. The water was off and caused some sort of problem with my dishwasher. There is some water in the bottom of the dishwasher. It won't drain or start washing. Do I need to call a repair man or is there a reset button of some sort. Thanks for your help. Rina


Hi.\015\012Often there is a lot of grit in the water supply after a pipe has been repaired, and this may have clogged one or more of the valves in your line, or the gauze filter in the inlet port on your machine. I would first turn off the wate ... Whirlpool Dishwashers

I have a Whirlpool dishwasher (Model #: du800cwdb5) and need help going about the repairs myself. When the dishwasher is turned on, the spray arm at the bottom does not spin, nor does it spray any water and the spray tower produces water but, rather than spraying, the water just kind of bubbles out of the top of the tower. The tower does also does not extend up as it supposed to.


There is something clogged in the motor/pump or its intake ... Dishwashers

Soap door on my Whirlpool dishwasher model # DU810SWKU0 does not open.I had inner door off to check rinse agent problem.Is there something i did putting inner door back on? If I close soap door and turn timer knob on outside of door the soap door will open after I make two full turns of the knob.If this cant be fixed can I just put soap in the bottom tray that has no door or put soap in both trays and do not close the soap door? Thank You RH.


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Problem with top spray arm not turning in whirlpool dishwasher model #DU1055XTss3


... Whirlpool Dishwashers

It sounded like something was jammed in the bottom of dishwasher. Took it apart, not sure if put it back together correctly because now it is not turning (bottom). Is there a diagram to look at on how to put back together correctly? Whirlpool Quiet Partner II Serial # FP1386450 Model # DU943PWKQO


Go to sears part sales web site adn look at parts breakdown. ... Dishwashers

I just moved and now have a much older whirlpool dishwasher - the only words left on it are "sound conditioned" - model # is worn off too. The condo was built in 1980 ish and this is original appliance, It has the knobs on the right side and it is a push/pull to turn on/off. Problem - I use soap tablets - not ejecting from dispenser - should I be using liquid soap in this oldie - but goodie?? Thanks


... Whirlpool Dishwashers

Hi I am in an emergency situation with an ikea whirlpool dishwasher. I have no idea what model it is since it's built in and I can't find the manual in my rental apartment. The machine works normally until the part where it's supposed to pump the water out after rinsing. At this point it starts to beep, once, and then 3 times. On and on and on. If I open it, there is water stagnated there. If I try to turn it off and back in, it will go through a whole new program and then I get the same problem


Can you feel the pump operate during the last wash cycles? if not either theres a bad pump motor or lack of power to the pump during that cycle,if this is ok,then remove the drain hose to the main drain to see if this is plugged up with food debris ... Whirlpool GU2400XTP Built-in Dishwasher

Whirlpool dishwasher...Model 3385820, type #575-0..built-in...front panel has a dent..can a person remove and turn the panel around...suggestions on how to remove the dent or replacement part?


You can change that front panel, its not hard, personally i went to my local dump and took one off an old washer lol ... Whirlpool Dishwashers

Whirlpool dishwasher model ADP5550 WH when you turn it on the dial light stay's on the rinse cycle and the start button flashes twice and continues with a pause then a double flash


... Whirlpool Dishwashers

Hi, I have a Whirlpool dishwasher, model DU980QPDQ6. The problem is it won't turn on. We bought it in 3/98 and had no problems with it in the past. The lights go on, I can hear two clicks, or relays, and it would start after the second click. Well it does'nt do anything! Help me please! Thank you!


... Whirlpool 24 in. GU980SCG Built-in Dishwasher

Whirlpool Dishwasher ADP 252 model (old) It will start with the program and then just stopped. I have to turn the knob to carry on with the next step of the program. Maybe dirty? Can I clean it somehow?


Sounds like you have a heating problem. Machines with a timer are controlled by the thermostat, so it wont click on until the machine reaches the correct temperature. Is the water hot? If yes then you need to replace the thermostat and high limit sta ... Whirlpool Dishwashers

I have a whirlpool in counter dishwasher model # DU915PWPQ0 serial #FS2536586. The problem i have is the light cycle, green light is constantly blinking. When another button is pressed the heavy and normal cycle lights start blinking and the light cycle, light is illumanated constantly. I have left the power off for 24hrs and when turned on the light blinks again. it will not start any cycles.


Hi Mike...As I said..it flashes 4 times (not 5) 4 times then stops and starts flahung 4 times again. Also, the float is free moving in the tub,\015\012\015\012Any other suggstions??\015\012\015\012Thanks\015\012Dave ... Whirlpool 24 in. ADP5962 Free-standing Dishwasher

Dishwasher has power but is not turning on? I have a Whirlpool Gold Quiet Partner IV Model # Gu1500XTKS0 Seriel # FM1115468 Type # 575-0 2.7 amp 60HZ 120 Volts


... Whirlpool Dishwashers

When I turn on my dishwasher it apparently washes the dishes but won't dispose of the water. Why? It's a Whirlpool Model #DU910PWKQ0


Check to make sure your discharge hose isn't clogged.Makes sense that if your machine is washing,then your pump is operating fine,just not removing the water.Check the drain input under your sink that it isn't clogged also. ... Dishwashers

I have a Whirlpool Dishwasher Model #GU240CXTPB1. The normal light won't stop blinking. Tried turning the breaker to reset, but still blinks. No other button works.


Whirlpool dishwasher reset sequence is usually to hit the heat dry then normal then heat dry then normal buttons within 5 seconds and it usually resets. ... Whirlpool GU2400XTP Built-in Dishwasher

I have a Whirlpool Dishwasher, model DUC600, serial # FS2202628. It suddenly stopped working and "clean" light is flashing. I turned the power off, hoping to reset it but the light is still flashing. Can you give me some direction? If it's a component gone bad, I can replace it if you can tell me which one. Thanks! Joe


... Whirlpool Dishwashers

The lights in the front turn on but not my dishwasher whirlpool model GU2600XTPS7


You could either have a bad door switch. check for continuty on the switches ... Whirlpool Dishwashers

Have whirlpool dishwasher model DU1055XTSS2 and the top rack water wheel does not spin. Operated the washer with door opened and it gets water but doesn't spin. There are no restrictions to the jets on wheel and the wheel turns feeely. The only thing i can figure is inadequate water pressure....


... Dishwashers

Whirlpool dishwasher Model GU1200XTL 80, Serial #FM4515914. The two fans are not turning though the machine seems to be running but nothing happens besides the water will fill up then drain out. Nothing gets clean. There is nothing blocking the fans and it was working fine. Please advise - thanks.


... Whirlpool GU1200XTLS Stainless Steel Dishwasher

My dishwasher, a Whirlpool ADP 931, has stopped working. Possibly because the door was opened during operation, right after it was started. There is some kind of error condition indicated through a blinking Start light, but I don't know how to analyze this. This is a quite simple model with very few buttons to press. When I turn the program knob right to start it, the only thing that happens is that the green Start lights begins to blink continuously. There is also another green light


Hello & Welcome to FixYaThis light is reset by pressing two buttons in sequence 3-4 times, to reset your dishwasher press these buttons in sequence:High tem ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1861 seconds