Having problems with your Whirlpool Dishwashers ?

Can you remove top off a ADP6000IX Dishwasher to fit it under the bench?


Answers :

Repair Help & Product Troubleshooting for Whirlpool Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can you remove top off a ADP6000IX Dishwasher to fit it under the bench?


... Whirlpool Dishwashers

I got this bosch sgs43C12 dishwasher and have the problem that it doesn't fit in our new kitchen(it's to high). i know it is meant as a free-standing dishwasher but is there a possibility to remove the top to get it into the new kitchen? or won't the dishwasher function without the top? many thanks for any help martin


THE LOWER LEGS CAN BE ADJUSTED ON THE LEFT ,RIGHT AND MIDDLE ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

I am an Australian who has bought a second hand Defy Dishmaid dishwasher from a South African work mate. It is a 2/3 year old machine that he bought over from South Africa. When he moved into a new house the machine did not fit his kitchen bench opening much to his frustration so he sold it. When placed in my kitchen it was a tight fit and upon recent inspection the floor pan of the unit, it may have buckled. It worked well until recently when we did some renovations when I needed to remove


Hi\015\012\015\012This means that the dishwasher is unable to drain water completely, you can run your washer at\015\012its hottest temperature setting with 3 cups of vinegar inside the unit. After\015\012this take off ... Dishwashers

How do you remove the top of the S510 dishwasher? We have laid new tiles and it will not fit back in the space with the top on. Thanks Loraine


Check whether you can adjust the machine legs. Removing the top, it depends on the design. If removable moulded or laminate top is provided :Watch for the fixing screws at the back of the machine. If screws are there remove them. Slide th ... Bosch SHU5316UC Dishwasher

My maximum clearance height for dishwasher machine is 835mm from floor to undersude of bench top. can adjustable feet be removed from dishwasher to give me an extra 10 mm clearance ?


... Samsung Dishwashers

I just got delivery of my new Blanco BFD4X dishwasher, but need to remove the top, so i can fit unit into my dishwasher space. But not sure how to do.


... Dishwashers

GE Potscrubber 650 Dishwasher, 13 years old. We want to take the front lower panel off to move the motor fan by hand, as you described for glideston'es post, but we can't figure out how to get the panel off. A repairman told us to remove the three screws at the top of the lower panel -- but they are too close to the upper door panel. The space between the two panels is not big enough to fit a screwdriver or any other tool we can think of. How do we remove the lower panel?


Homeowner with this model:\012I believe you would need to take the door loose by removing the screw on each side of the door near the bottom on the outside. \012\012I would recommend removing the unit whole instead. That way you don't n ... GE Dishwashers

Dishwasher model: se6 tie1 Fitted under kitchen work-top. Problem: After setting a program & switching on & closing door ? there is a normal sound from within but if door is opened there is no evidence of water being pumped in. I previously cleared food debris from the drainage pump area (including under the pump cover), checked the spray arms and checked the water supply was getting as far as the long in-take pipe. As it seems problematic to remove the (screwed in) dishwasher, I have not che


... Dishwashers

Remove the top from free-standing-dishwasher bosch sgs43c12


Hello martin - yes you can remove the top. And no, it will not harm the dishwasher funcion. ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Dishes all cloudy and spotty. Maytag Intellisense plus 1996 dishwasher. I have real hard water that leave white calcium build up. I can remove and clean all of the lower spray arms and filter. How do I remove top spray arm to remand remove deposits? The motor sounds good, hot water, fill ok. On the inside top of center of arm where it meets the center input connection there is gunk to remove. How do I get to it? remove arm? thanks


The problem is hard water. Go to www.dishwasherfilter.com. They have a new product out that solves this problem once and for all. It filters the water entering your d ... Danby 22 in. DDW399 Free-standing Dishwasher

The top spray arm of my Frigidare model FBD4315LFC0 Aqua Surge dishwasher fell off. Their appears to be a missing part. I've been searching online for a schematic and can't find one thorough enough to use. The parts I have are: 1. The top sprayer arm (the one in the top of the tub) 2. The two piece plastic keeper ring that appears to fit into the top of the spray arm. 3. A small white grommet looking item that fit inside the keeper nut. 4. The keeper nut that screws directly onto the wate


Hello there:hey sorry i keep getting disconnected i will be back on really soon i need to find out what is going on i hope these things that i have discussed with you is helping you out the parts are not as hard as they look once yo ... Frigidaire 24 in. FDB435RFR Built-in Dishwasher

Hi, we are trying to install our new Bosch dishwasher model: SMU68M05AU. I am surprised to see packing foam and flimsy edging across the top edge that meets up to the stainless steel door edge when its closed. I can not find detailed installation instructions. Is there not a strip that goes across the top to meet the door as the top looks very ugly? The dishwasher door protrudes from the under bench cupboard space so the top part is in view and exposed.


Thanks for your question!I'm sorry that you haven't received an answer yet.The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:1. the question is unclear, incomplete, or poorly ... Bosch Dishwashers

I have an shx65905uc bosch dishwasher that runs and works except for that there is not enough water pressure to rotate the top wand or operate the top sprinkler. The bottom wand does have water and turn and does the top but it is not enough to turn it. If i remove the bottom wand and plug it off then the top will work properly. I have cleaned all screens and removed the plate to access the pump and all seems fine. Any Thoughts


... Bosch SHX65P05UC Dishwasher

Miele dishwasher G2870 scm. There is an F14 fault. I have cleaned the arms removed the waste basket from the bottom of the dishwasher and removed the two parts one with the large metal ball to expose the plastic wheel clog. There does not appear to be a blockage. I also removed the top arm and cleaned that out. I don't know what other inlets to check as the guide does not tell me exactly what an F14 fault is but explains F11,12,13. Can you help?


F14 on your model of dishwasher is indicating a blockage, poor water\015\012pressure or could be a fault with the pump pressure level switch or\015\012circulation pump.Filter and non return valve is cleaned of any blockages and if the fau ... Dishwashers

Dishwasher LG LD 1415T1 water overfowed from sink onto bench top and then onto top of dishwasher ,E1 flashed on and off onfront panel of dishwasher and it stopped empting out Please what does this mean : Gary [email protected]


... Dishwashers

I have a MODEL 577-0 kudk01ILb55 KITCHENAIDE dishwasher. I am trying to remove the inner pplastic bar that goes vertically through the system from top top bottomj so that I can clean out the filter. But I do not see how to remove that bar. I have looked online for a repair manual of some type but have been unsuccessful. Can someone tell me how to remkove the bar so I can get to the filter on the bottom? I have already removed the star shaped rinse sprayer.


... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

My dishwasher came with styrofoam placed between the top and the inside , a foam sheet and cardboard screwed to the back. Is this the packaging and does it need to be removed before installation? The picture in the instruction manual does not advise you to unscrew the back packaging. Even though I attempted to remove the foam sheet it is stuck under the sides at the back of the dishwasher.


... Dishwashers

I have a frigidaire dishwasher - model number PLDB998AC1. There are two spray arms in this dishwasher - lower and upper. The lower works fine but the upper spray arms are not spinning. There is what I think adequate water pressure coming in from the top but no movement on the upper spray arm. Here is what I know: 1) The water pressure and spray arms alternate between top and bottom. 2) The upper spray arm moves freely when I push it gently. 3) I have removed the pump and cleaned out an


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

I have a Kenmore Elite Dishwasher Model 665.13773K600. It seems to have no power to the touch pad (top) control panel. I have already checked the circuit breaker and the power to the dishwasher. A friend said that it may perhaps be the thermo fuse cut out that needs to be replaced. 1) Is this true? 2) How can I remove the 1" thick control panel touch pad after removing the six screws- it seems to be stuck, and I don't want to break the plastic touchpad.


... Kenmore Dishwashers

I have a whirlpool GU2700XTSQ1 dishwasher. I have the typical top rack not cleaning problem. I have removed the rear washer tube that leads to the top sprayer, no clogs. Upper arm is clear, lower arm is clear. I also removed the lower cover, checked the chopper screen and inlet, no clogs. There is a screen inside that I cannot get to. It appears to have some sort of paper or cloth sticking through the screen with a 50% block. Perhaps a sticker or label from a dish. I see this screen when looking


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

My Professional series dishwasher does not work properly. It is only 1.5 years old and glasses on top rack get sprayed with fine layer of particles every time I use it. Other items, top and bottom, are often not clean as well, but glasses are the hardest to re-clean. I have tried evacuating the water left at the bottom of the dishwasher before running, pre-running the hot water in the sink and ensuring that the disposal was run, removing and cleaning the filter at the bottom of the washer. None


Hi, \012 \012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms onli ... Frigidaire PLD4375RFC Dishwasher

I am trying to clear the drain on my ge portable dishwasher. I have removed the 2 screws for the drain cover but my dishwasher has another part on top attached to the spray arm that is holding my cover on . I can not figure out how to remove this part. the model # is gsc5511pooww


... GE Dishwashers

My two year old Bosch dishwasher is not cleaning well and is leaving gritty food on most glasses, cutlery, etc. Worse on the top but also not good on the bottom. I have tried cleaning the removable filter on the bottom and rinsing the two 'wands' - one on top and on the bottom so that the little holes are not blocked. I've tried using the power scrub mode. I've run the dishwasher twice with detergent and no dishes. This has problem has persisted over at least a month. Can you please help me?


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Bosch Dishwashers

My GSD900G-01 dishwasher leaks where the hot water is supposed to go into the tub. There's a plastic fitting that seems to be glued to the side of the tub and the hose from the inlet valve goes to the top of this fitting. There are no visible cracks or other damage but there is some rust inside the tub at the fitting. The fitting has two open gaps on it's side which is where the water is leaking out. It looks like the water is supposed to flow past these gaps (which I'm guessing are there to


Hi, I seen where this posted on premium. If you still need assistance, please let me know. I can help you through this.\015\012\015\012Vic ... Dishwashers

The top level is not getting clean. We think the passage to the top water jet is clogged. There are two holes in the back that the washing arm fits into, depending on what level the top rack is set at, and one of them is stuck open. We have not been happy with this dishwasher from the start and are trying to decide if we should get it fixed or just buy a new one.


Sometimes it is not worth the headache.dishwashers are a dime a dozen,if you want to happy,just replace it,most dishwashers are unrepairable.no matter what the maytag man says. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1980 seconds