Having problems with your Whirlpool DP1040XTX Portable Dishwasher ?

My Whirlpool DP1040XTXQ portable dishwasher will not turn on. I've checked the plug, outlet, breaker, etc... I know there is a way to reset the keypad by holding down a couple of buttons at the same time, but I cant remember the right combination or how I learned it in the first place. It's not in the user's manual.


Answers :

Repair Help & Product Troubleshooting for Whirlpool DP1040XTX Portable Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Whirlpool DP1040XTXQ portable dishwasher will not turn on. I've checked the plug, outlet, breaker, etc... I know there is a way to reset the keypad by holding down a couple of buttons at the same time, but I cant remember the right combination or how I learned it in the first place. It's not in the user's manual.


... Whirlpool DP1040XTX Portable Dishwasher

Maytag Quiet Series 800 dishwasher won't start. The only button that I can get to work is pressing and holding the locking feature--that light eventually comes on. A couple of times I came back in an hour or so or the next morning and hit the start button and it started right up. Now it won't start at all. VERY FRUSTRATING!


... Maytag 24 in. MDB6100A Built-in Dishwasher

Kenwood Elite Dishwasher Mod#665.13779 K600 "Normal Wash " light blinks continuously with NO washer action. No other wash modes light up when pressed. Washer does not do anything. However, a couple of times I got it to make a noise as if it was draining, but then nothing happens. Push "Cancel" and it blinks in unison with Normal Wash light. Open door and close it, "Cancel" light goes out and Normal Wash light continues to blink. Have tried various combination of buttons to try to "Reset"


... Kenmore Dishwashers

Won't start! Model # KUDI01ILBL4 Only Normal Cycle button lights, but will not start. Had same problem before and was told to press Cancel button to drain water and then turn power off for a while and then back on. Well, this worked a couple of times, but not this time. Need an expert opinion on next move.


Toggle between 'heated dry' and " normal ' until all light illuminate Then press cancel. now ensure door closes properly without striking cabinets slightly. The neutral for most components run through the door switch and jarring actiong causes a faul ... KitchenAid 24 in. KUDM01TJ - Multiple Color Built-in Dishwasher

We have a Bosch dishwasher. The manual says for models SHV46C13, SHX43C0 so I guess it is one of those. It stopped working and when I opened it there was a bunch of cloudy soapy water on the bottom. The power was not coming on at that point. I have noticed that lately when I go to push the on button, the light will go on and when I shut it it doesn't start. After a couple times of turning it off and on it will run normally. This has only happened a couple times though....


... Bosch Dishwashers

I own the Siemans SL34A006UC dishwasher which had the recall repair completed. Now it doesn't work right. The unit goes through any of the cleaning choices but when it comes time to drain, the unit stops for a few seconds, swishes water for a couple seconds, stops again, then swishes for a couple seconds, stops and then goes back in to regular cleaning mode until the timer reaches zero. At each drain cycle, it does the same thing earlier mentioned 3 times in a row, then back to washing. The unit


You say "dishwasher which had the recall repair completed." (sic) "Now it doesn't work right" (sic)\015\012\015\012Being a professional I must advise,and that, if this is the case, th ... Dishwashers

I have a whirlpool gold quiet partner 3 n the cancel button won't go off n the normal wash button won't go off either. I can do a quick wash cycle on it but then goes right to sani rinse afterward n don't shut off itself it just keeps on going. Solution? Is there a reset for it because I have an air dry button but not a heated dry button so I don't kno if I should push sani rinse/air dry two times over as opposed to sani rinse/ heated dry or if there's a diffrent solution for it. This all starte


... Dishwashers

My KitchenAid model number KUDSO2FR-SS hs blinking lights that won't shut off. The Pro Scrub light blinks on and off and won't shut off. I can sometime lock it out with the heat button but it lights right back up. After a couple of minutes the normal button starts blinking as well as the clean button. The dishwasher does not turn on. I tried unplugging it but it just reverts back to the same thing


... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Prima lpr601 problem- filled dishwasher up sa normal set the wash pressed button on far right (dont know what it is but needs to be done), closed door and loud raattling so i opened door to make sure all spray arms were clear which they were, closed the door , again the rattling . now the green light has gone out on far right and cant get it back on so program wont start at all. Any advice?? please help


... Dishwashers

When I press the on button the cycle light is on at the 50 degree setting and I cant change the setting and it wont run on that cycle. It has happened several times but this time it wont come around


Looks like micro controller problem. Contact authorized service center. ... Dishwashers

Tecnik DW2677 Hi, my dishwasher regularly starts to bleep after starting a wash program. When the door is opened it stops bleeping and the right hand light flashes 7 times repeatedly in sequence. By holding down the start and program change buttons together for a few seconds, it will reset. If you then close the door all is well for a few seconds the pump sound like it expells some water and then it starts to bleep again. The above process can happen several times before it decides to do what it


Check your water intake- i had the same issue - a leaky fitting wasn't supplying enough water to the dishwasher. had exactly the same symptoms you describe. fixed the leak, reset the dishwasher & it's working fine.\015\012\015\012\015\012\0 ... Tecnik TDW2677 Built-in Dishwasher

Smeg Dishwasher Hello I have a smeg dishwasher - built in, push button. It has stopped working - the program start and you hear it drain but that's as far as it gets, no water appears to be getting in. A couple of times the last 2 program buttons flash or the rinse light is on when we open it. let me know if you have any thoughts on this - I'd really appreciate it. thanks Diane


Replace the timer/control board ... Dishwashers

KitchenAid KUDI10FL dishwasher- The door spring system broke and I repaired it, but now all of the sudden the dishwasher will not start. The door may have been dropped a couple of time before the spring system was repaired, but it did not hit the floor, just a hard sudden stop. All of the cycle setting lights come on when they are pressed except for the start button. Just before the start button stopped working the dishwasher started by itself or started several hours after cycle selection had b


Hi- It is possible that the door latch is not completely engaging. If the door dropped the hinges may have bent a little thus preventing a good contact with door switch. Try pressing and holding the door shut, hard, and pressing start. If that wor ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

My Bosch dishwasher model SHE 4AM 16UC /03 is not washing correctly. All wash cycles ( regular/ quick etc) stop before completed There is dirty dishwater remaining in the tub. This happened also a couple of months ago, I can't remember exactly what I needed to do, but as I remember I needed to reset the unit, by pushing some of the buttons. please help


... Bosch Dishwashers

I have a technika diswasher,not sure of the model, is approx 3 years old and has a big dial on the left hand side with 7 wash functuions and the power button is smaller and is on the RHS. I cant remember how to reset the wash settings. I thought that by pushing in the large dial this set the wash cycle but a technician told be that you have to hold your finger on the start/pause button until the green light flashes, and turn the dishwasher off then back on. Can you please give me a step by ste


I have the same model. You just turn the dial to the setting you want, push the dial back in, turn the (right) power button on then turn the smaller start button on. I use different cycles all of the time depending on whats in the load and this works ... Dishwashers

What buttons do I push to actually make my dishwasher work. The power blinked off and I cant remember what button to push to make it work. It is a GE stainless steal quiet 3 dishwasher


Try turning breaker off for about 2 minutes and then retry. This shold rest controls for you. ... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher

Its happened before i have a kud101flss6 diashwasher and something trips the computer a repairman came and pressed a sequence of buttons on panel and fixed it cant find repairman and cant remember sequence help


Usually an interruption in the dishwasher program results in a blinking "Clean" light. This commonly indicates a component problem or program malfunction. If a\015\012component is defective, it's usually attributed to the heating cycle or\015\012the ... Dishwashers

Control Panel won't let me hit the start button. The dishwasher is a little over a year old and is used at most once a week. The blue light on the bottom right of the dishwasher seems to no longer light up. The control panel will let me select the wash, but the start button and time indicator does not light up. Not sure if this a real defect and if just a simple exchange of the front control panel will fix the problem? Already tried resetting the circuit breaker and that did not help. Than


... Dacor Epicure ED24 Stainless Steel Builtin Dishwasher

Hello I have a Whirlepool Dishwasher model DU945PWPQ2 I have taken it apart before for maintanance but this time I am having trouble removing the ''Wash impaller'' I was able to remove the screw that sits in the middle I just cannot remove the actuall impaller it rotates and all but I just cant remember how I got it out last time .....PLEASE HELP !!!!!


LOOKUP YOUR DISHWASHER ON THE INTERNET PARTS FOR APPLIANCES AND FIND ONE WITH PARTS BREAKDOWN FOR YOUR UNIT. ... Dishwashers

I have some problems with a Whirlpool DWF 406 dishwasher: The other day, my wife complained about it not finishing a program (just stopped and started bleeping). I saw a post at this forum where it said to clean out the black grid down my the sump. I did that, and then the dishwasher worked fine a couple of times. Today when I got home from work, the machine just bleeped at me and and the green LED light by the start button flashed 9 times over and over again. Does anyone know what those 9 flash


We have the same problem. The dishwasher is 10 years old. In one of the German forums they said that usually it's because the sieve ahead of the membrane has a fine layer of sludge and the pump cannot pump out the dirty waste water. They said that yo ... Whirlpool Dishwashers

Cycle buttons work, option buttons dont, Cant deselect heated dry, Wont start


I had the same symptoms and the front panel was the fixthe part with the buttons on it ... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

I have a Diplomat ADP 8520 dishwasher (possibly SMEG manufacture) which will not stop trying to empty. There are 4 leds lit reading left to right and it beeps. I have read on some forums about pressing the programme button 4 times or holding it down for ten seconds to clear the fault but neither of these solutions work. I thought maybe that the drain was blocked but I put the pipe directly into the sink and it empties ok, problem is, it does not stop.


Fault is probably water in the bottom tray operating the anti-flood device. take bottom front panel off and mop out the water and it will work. if fault reoccurs then you have a leak ... Dishwashers

The electronic controls seem to be combining in odd ways and show three or four different functions at a time. Also the draining only occurs for a couple of seconds. I finally had to physically empty the water.


Press the RESET button and wait for 5 mins. If no go, you need a new control panel circuit board ... GE 24 in. GSD4320Z Built-in Dishwasher

When i turn dishwasher on it goes to 1 and just stays there.one time a tech reset my old one by pressing three of the buttons but i cant remmember which ones. its a queit partner 1v


Hi,\015\012\015\012Normal-Heated Dry, Normal-Heated Dry, Normal-Heated Dry, Normal-Heated Dry.\015\012\015\012OR (depending on the model)\015\012\015\012Hi-Temp-Heat Dry, Hi Temp-Heat Dry, Hi Temp-Heat Dry.\0 ... Whirlpool Dishwashers

I have a kenmore ultra wash mod# 665.13492k600 dishwasher that in the last couple of days will not drain the last cycle . If you push the cancel /Drain button after the cycle is finished it will then drain but all the dishes have soap spots on them and are very wet .I have checked for clogs but cant find any I have also run a lot of water throug our waste disposla because the dishwasher drains into it help ??


... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0696 seconds