Having problems with your Whirlpool DU1055XTSD 24 in. Dishwasher ?

Whirlpool dishwasher wont change cycles

\015 My Whirlpool Dishwasher Model #DU1055XTSS2 will not change from the wash cycle. I replaced the hi-limit thermostat and checked the heating element(11ohms),which is in range. Any other ideas?\015

Answers :

Wow, good move with the heating element. most folks don't know about how that relates. if that stuff is good, it must be the timer. or at least the small motor which turns the timer. good luck
Repair Help & Product Troubleshooting for Whirlpool DU1055XTSD 24 in. Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool dishwasher wont change cycles


Wow, good move with the heating element. most folks don't know about how that relates. if that stuff is good, it must be the timer. or at least the small motor which turns the timer. good luck ... Whirlpool DU1055XTSD 24 in. Dishwasher

My dishwasher wont change cycles. - Whirlpool DU1055XTS Built-in Dishwasher


Its might be your heating element or the thermostat check if the heating element get hot if not theres your problem...the machine try to get to sertion temperture and cant do that so it stuck in the same mode...heater # 8572861 coast 20-3 ... Whirlpool DU1055XTS Built-in Dishwasher

Noisy Dishwasher Our Whirlpool GU2300 has started making a loud buzzing noise as soon as it goes into the wash cycle. It is a constant 60Hz buzz that does not change during the wash cycle. Pushing / twisting / lifting the dishwasher does not change the noise


It is a capacitor to start the motor for the next cycle. I think it is inside the door. you may have to call a tech. ... Whirlpool GU2300XTVQ Builtin Dishwasher

The start button is flashing on the dishwasher and it wont start,i try changing the different cycles but it just wont start,the bottom of the dishwasher was full of water in which i drained it and took out some type of filter as i thought it may be causing a blockage which it wasnt as i still have the same problem....please help...my name is adam


What type of dishwasher do you own? Model, Brand?It could be a touch pad or control board issue. ... Whirlpool Dishwashers

I have the Whirlpool Quiet Partner 1 the wash cycle starts and about 20 Min.'s into it the clean light starts flashing or the the start light, one or the other each time and it wont dry the dish's anymore we have already replaced the panel once and it has always popped when it is filling with water or changing cycles. HELP!!!! I hate washing dish's and I am beginning to hate all Whirlpool Appliances.


If the clean light blinks 7 times thats you heating circuit. Test the heater with an ohm meeting to see if it has open. If so order the heater kit and it comes with the control board. ... Whirlpool GU2400XTP Built-in Dishwasher

When i turn my dishwasher on it runs it wont change cycles and wont wash stays in the same cycle


Hello,This sounds like a bad timer.It could also be a defective thermostat. This problem will become apparent with the water heat option selected. Check by running the dishwasher with this option de-selected and see if it proceeds normall ... GE Nautilus 24" Built-in Dishwasher

My Kenmore Dishwasher Model # 665.13832K601, wont change from wash cycle to dry cycle. It stays on wash until you stop the cycle and drain the water


... Dishwashers

Dishwasher wont pass rinse cycle. - Whirlpool Dishwashers


... Whirlpool Dishwashers

My dishwasher doesn work . it wont start the cycle. Some one has changed one part (not sure what it was!) but their next step was going to be look at the waste to see if that was clear. Is it right that this could cause it to not cycle? How do I check the waste? THANKS


If the program controller is able to set the program , then the machine must start up. Only if the waste water/drain is clogged will there be a flooding resulting in fault in the drain cycle.\012So it is important that ... Dishwashers

Dishlex Global 310 model. My dishwasher has water sitting on the bottom of it and it wont drain. I noticed it after I did a cycle of dirty dishes and the 'fast' light was flashing when I went to open it. Which shouldnt have been because it was on a normal wash. The water has been sitting at the bottom for 2 days now and still wont drain! I've taken out all the parts on the bottom which come out and cleaned them. Still no change however.


Just ran another cycle and it was fine ... Dishwashers

My dishwasher wont change cycles - Dishwashers


... Dishwashers

WHIRLPOOL ADP 8540 dishwasher has blinking light on all the time (blinking in cycles of 4). When you turn it on (by holding the button down for around 4 seconds) it wont complete the cycle and you need to keep restarting it. can anyone let us know what the problem may be


See this step: ... Whirlpool Dishwashers

WHIRLPOOL ADP 8540 dishwasher has blinking light on all the time (blinking in cycles of 4). When you turn it on (by holding the button down for around 4 seconds) it wont complete the cycle and you need to keep restarting it. can anyone let us know what the problem may be. Thank you TD


WHIRLPOOL ADP 8540 dishwasher has blinking light on all the time (blinking in cycles of 4). When you turn it on (by holding the button down for around 4 seconds) it wont complete the cycle and you need to keep restarting it. can anyone let us k ... Whirlpool Dishwashers

Whirlpool Dishwasher,serial number 330251002448 wont stop beeping


The main controller appears to be very confused or failed.\015\012\015\012To test, fully remove power from the diswasher for at least 90 seconds. Power back on and test. If the same behaviour is seen, the controller card has almost certainly ... Dishwashers

Whirlpool dishwasher wont finish cycle and beeps


Pls do let me know if you need further help on this ... Whirlpool 24 in. ADG7540 Built-in Dishwasher

My kenmore dishwasher quiet guard is stuck on cleaning cycle! the lights dont seem to change and all it does is clean and wont drain! what can i do?


... Dishwashers

Whirlpool quiet partner ii dishwasher does not change cycles


... Dishwashers

It wont go past the wash cycle - Whirlpool DU1055XTS Built-in Dishwasher


The soil censor is the problem, basically the water in the machine is circulating around and the soil censor doesn't detect how dirty the water is so therefor wont empty out, change it out and you should be good to go. ... Whirlpool DU1055XTS Built-in Dishwasher

Whirlpool Dishwasher Model Du850SWPB3 Changed out Water valve, float switch, Still doesn't fill with water. D/w runs in all cycles , just NO WATER.


Hello,What ya need to check is for power coming into the water valve from the control board by using a mulitmeter set to measure ac volts and when the dishwasher is running...during the times the unit is supposed to fill their should be p ... Whirlpool Dishwashers

Whirlpool adp 5550 Dishwasher wont complete a cycle. The light in the start button flashes four times in a continuous pattern. Have pressed the start button for 3 -5 seconds to reset after which the machine seems to operate ok then it stops and the start button returns to flashing. Have cleaned the filter and checked the sullage pipe for blockages What do I do next?


... Dishwashers

Whirlpool dishwasher will fill with water but washer cycle wont kick in just makes a humming noise


Your pump could be jammed or plugged. Make sure the grate in the bottom of the washer is clean. If possible, pull it out and look under it to see if there is anything in the hole. ... Whirlpool Dishwashers

I have an ignis dishwasher by whirlpool and it seems stuck on the rinse cycle - it wont move on and the machine is beeping non stop. I have switched the machine off several times and unplugged it but it still lights up on the rinse icon and is still beeping and I cannot move it on


... Dishwashers

My Whirlpool ADG 7460 start button flashes when I reset it and change the programme it wont start if it does it does not heat and always reverts back to the cold rinse cycle.


... Whirlpool Dishwashers

I have a Whirlpool Quiet Partner 3 GU2200XTSB3 dishwasher that starts but wont complete a full wash cycle. I went to diag mode and the follow light sequence appeared: Normal light and washing light came on, then switched to Rinse only and drying then back to normal light washing this sequence repeated 3 times then no lights then Light and heated dry followed by the normal light flashing repeatedly for an long period of time then switched to Light and heated dry then all lights went out I was t


... Whirlpool GU2200XTSB GU2200XTSQ 24 in Builtin Dishwasher

Whirlpool dishwasher won't change to rinse cycle


... Whirlpool GU2400XTP Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1447 seconds