Having problems with your Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher ?

I have a Whirlpool Gold Dishwasher Quiet Partner IV. GU Series. It has stopped working and there are no lights on the panel. We have checked the power supply and that is fine.


Answers :

Hello &\015\012Welcome to FixYa
\015\012\015\012

Press and\015\012hold the AIR DRY/RINSE ONLY button to reset the control, if you have already\015\012tried this and it is possible that the door was opened while in cycle then the\015\012first thing that should be checked is the door switch/lock assembly. You can\015\012take a hair dryer and try to blow air on that, if the problem returns then\015\012replacing the door switch/lock assembly is recommended repair. Please get back\015\012to me if you have any other questions.
\015\012\015\012

Kevin

Repair Help & Product Troubleshooting for Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Whirlpool Gold Dishwasher Quiet Partner IV. GU Series. It has stopped working and there are no lights on the panel. We have checked the power supply and that is fine.


Hello &\015\012Welcome to FixYa\015\012\015\012Press and\015\012hold the AIR DRY/RINSE ONLY button to reset the control, if you have already\015\012tried this and it is possible that the door was opened while in cycle t ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Control panel will not light up, the dishwasher was running and now it has stopped mid cycle and will not do anything. I just replaced the control panel (black plastic with buttons, not control circuitry). was running the diswasher and it seemed to be working fine, then stopped. water is standing in tub, I checked the float, I don't think the float is the problem. There is power to the outlet, no tripped breakers. But control panel will not light up.


I have a kitchenaid dishwasher model # KUDC10FXBL1 I went to start it and none of the buttons were working. I have checked the breaker and the wiring and everything seems to be in order. ... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher

My Kitchenaid dishwasher KUDIO1FLSS1 stopped during the wash cycle. No lights and no power. I checked the power to the washer and the fuse inside the door panel. Both fine.


... KitchenAid Dishwashers

I have an 8 year-old Kenmore 665.16912 dishwasher. Worked fine until two days ago. Then it stopped working altogether: nothing lights up on the front panel. I have checked the 120 in the electrical box, the door switch is working, the thermal fuse is working and there is 120 volts at the white and black connections to the timer control board. I bought a new timer control board for $120 and that did not fix the problem. What else could be causing the unit to completely stop working?


If all are really good then the only thing it con be is the display (8269205) $25.00 part, if it's bad dishwasher wont run ... Kenmore 16912 Built-in Dishwasher

Two days ago my LG dishwasher model lDF 7810BB worked fine. Yesterday I loaded it and the display panel will not light nor show any sign of power. I check the circuit breaker several times and all other electrical items work fine in the kitchen. The 2 year warranty expired 9/08/08


Check for voltage with a multimeter at the wires very near the front, just behind the kick plate. Follow the incoming electrical wire in and remove the little plate the covers the wires/wire nuts. I have seen wires that appear to be connected prope ... LG 24 in. LDF7810 Built-in Dishwasher

My Maytag mdb5130aww dishwasher stopped working; the only function it does is DRAIN. The panel buttons light up. WASH, RINSE etc all do not work. How do I test if the control panel is sending out power to the water pump? What else can I check?


... Electrolux 24 in. EDW5500DSS Stainless Steel Built-in Dishwasher

Hi there . Beko DWD4310 stopped working , no "power on" lights, changed control panel as advised here, still not working, checked on off button with fase tester power getting as far as there. Any suggestions ?


I can see a couple of possibilities as to why the on/off light is not turning on.\015\012\015\012Either the door switch is faulty or the thermal fuse is blown.\015\012I do not have access to a service manual - so cannot provide the ... Beko Dishwashers

Kenmore 13599K600 stopped working. Panel board doesn't respond - no lights, no response. Power getting to unit... checked at hard wire ends behind kick plate panel and power is reaching the unit.


Had the same issue and had to replace both the board and the fuse. Six months later, same issue again. It might be when the "Sani Rinse" is used as it dies at the end with some water left but the water is very clean. Possible defect? ... Kenmore 13599 / 13594 / 13592 Built-in Dishwasher

Stopped working no power light come on like it's dead.The power supply is fine to the plug and the fuse is ok it just stopped why? is there a reset button anywhere?what would cause this? no hint of a problem before


Check where the pig tail the plug going into the wall follow the plug wire to the connection at the dishwasher. You will need to remove the bottom panel of the dishwasher at the floor. This access panel allows you to see the underneath of the dishwas ... Dishwashers

I have an Electrolux EIDW 6105GB1. The washer fills with water then immediatly drains back out, the lights all flash and the trouble code light under the kick panel indicates the wash pump. It has done this before and I took the pump out and checked it with power direct, then returned it to the main control board plug and it was working and pulsing it's speed as it should. It worked fine for several weeks and now it's doing it again. Is it possible that there's a problem with the water float ins


Hi\015\012\015\012The issue is either with the wash pump that is going bad or\015\012the motor itself that is unable to run. As the washer fills and then drains\015\012immediately so the pressure/float switch should also be checked. Hope ... Electrolux EIDW6105GW 24 in. Built-in Dishwasher

White knight dishwasher dw1260WA will not power up. The light doesn't come on either. Machine was in the middle of a programme but stopped with water left in it. at that time the light was working but even the light doesn't come on now. I also removed all the excess water out of the machine...I've also checked the fuse and it is fine. Any suggestions?


... Dishwashers

The dishwasher stop during the wash cycle. It did finish draining the water from the tub. The machine is not showing a power signs, I check the circuit breaker and the fuse is not tripped. I open and closed the door and the door latch seems to be working fine. There is just no power to the washer. Usually when a machine breaks down, there still is power or buttons that light up on the front of the machine. I looked on the internet and many say that the fuse could be tripped. No where can I find


... Whirlpool DU912 Dishwasher

One day the diswasher was working fine...the next time it turned it on it ran for about 3 min. then shut off and seemed to have no power. I checked the breaker...it was fine. A few days went by and all of a sudden the lights were blinking on the panel. So I pushed the cancel drain button. The water drained out and I then proceeded to load the dishwasher and turn it on again thinking it was just a fluke when it shut off earlier in the week. It did the same thing...ran for about 3 min and then shu


... Whirlpool GU2200XTSS Built-in Dishwasher

Maytag MDBH979AWS dishwasher - there appears to be no power coming in to it. The dishwasher will not turn on and there are no lights on the control panel. I checked the power in the breaker box and it works fine. Any suggestions what to do next?


Maytag MDBH979 power sensor will not turn on dishwasher. The other buttons and lights turn on when pressed but not the power button. Please help. ... Whirlpool MDBH979AWS Builtin Dishwasher

No lights Nothing, seems dead 6 months old working fine until yesterday Stopped it in the middle of cycle and would not resyart Tried breaker panel Power source fine Cleaned filters Tried reset


... Asko D5233XXL 24 in Builtin Dishwasher

Hi, I have a Dishlex Global 300 which has just stopped powering. The power supply is fine ( I plugged in other appliances and they work) but the machine is just dead, no lights, no sounds, nothing. The door closes OK. There have been no leaks, burning smells or any other problems with it. What to do? Please help! Thank you in anticipation.


Hello it,ll will be the on/off switch easy to replace and costs about 10-15 bucks youll probally see a char mark on the connector, where it over heated and shorted out. ... Electrolux Dishwashers

Our dishwasher worked just fine until today. There are no lights on the panel and it will respond. We checked power and it is on. We turned off power to the unit for one hour. Still no response. Help.


... Kenmore 24 in. 15689 Built-in Dishwasher

My Whirlpool GU2300 just stopped working. None of the panel lights come on. I've checked the outlet and it is working fine.


Hi there,\015\012\015\012here a few things to check:\015\012\015\012plug the unit into another outlet, if you still don't have power then\015\012\015\012unplug the unit and check the connections to the circuit cont ... Dishwashers

Dacor range hood insert, model # IVSR2. Both lights went out. Changed both lights and checked power supply neither of which helped. Fan still works fine. Could the rheostat be faulty?


... Dacor IVSR2 External Blower Integrated Ventilation System IVSR2

Whirlpool dishwasher DU1015XTXBO Stopped working during cycle, acts like don't getting any power. Checked the plugin and it works. No lights or anything coming on the dishwasher. Its like it just


... Whirlpool Dishwashers

I have a GE Quiet Power 3 that has completly died. I cannot get a light to come on or anything to beep when pressing buttons. I checked the circuit breaker and outlet and they are both working fine. I tried pressing and holding the reset button on the front control panel and nothing. It seems to have just died at 2 years old. Anyone have a solution? GE wants $80 just to look at it.


A dead set simply means a cut off of power supply. Open the back cover of your dishwasher . Locate the area where the AC cord is located and look for the plastic fuse holder which is usually installed in one of the AC cord line open it and replace t ... Dishwashers

Our EDW5505ESS is less than one year old and has only been used a few times. It recently stopped working altogether and the control panel doesn't even light up. I've checked and it has power from the outlet and to the dishwasher. Can you help


If this unit is less than one year old that means it is still in factory warrenty. I would call for service ... Dishwashers

Maytag MDB5601AWS Dishwasher worked fine when I moved into my new home less than 2 weeks ago. It just stopped working a few nights ago and the sellers did not leave info on the dishwasher. The only buttons that light up are the buttons on the right side of the START/CANCEL button (which does not light up at all) and the LIGHT WASH button on the left side of the panel. The DELAY WASH button blinks for a while, and then all lights on the panel go off completely. No noise at all comes from the


CLICK HERE for your owners manual.\015\012\015\012If, after reading through it, You feel you h ... Dishwashers

I have a kitchenaid kemc308kss04 power went out to house now no lights on control panel or not does the panel work. Light in me comes on but nothing else works. Checked breakers works. Any idea?


... Dishwashers

I own a KUDS01FLSS3 KitchenAid dishwasher. The lights on the control panel do not come on and a cycle can not be started. There is about an inch of water in the bottom of the dishwasher basin and it looks like the previous cycle did not complete. I have checked the wall outlet that the washer is plugged into and the washer is receiving power from the wall. And ideas? My next thought was to take the door off and check the power supply running to the door panel and control panel.


Servtek06 writes:\015\012check connections @ control board/module. May be Control Board/Module. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1499 seconds