Having problems with your Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher ?

GU980 dishwasher I have a buzzing sound when the washer is in drain mode. The manual indicates there might be something in the Power Clean Filter, and that it will go away when the object grinds up. I called Whirpool, and they said the same, and to run for 2-3 cycles to make go away. 2-3 cyles later, noise is still there. I noticed a nub off the rack that looks like an end peice of metal broke off from rust. My guess is it's stuck in the PCF, and will not grind up. I removed the nut, lower spray


Answers :

The nut holding the inpeller has to come off it is probally frozen
\015\012if it snaps off then the pump assy willl have to be replaced or at least the motor, you need to get below the impeller to see what is down there though, or let it run as it is
Repair Help & Product Troubleshooting for Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

GU980 dishwasher I have a buzzing sound when the washer is in drain mode. The manual indicates there might be something in the Power Clean Filter, and that it will go away when the object grinds up. I called Whirpool, and they said the same, and to run for 2-3 cycles to make go away. 2-3 cyles later, noise is still there. I noticed a nub off the rack that looks like an end peice of metal broke off from rust. My guess is it's stuck in the PCF, and will not grind up. I removed the nut, lower spray


The nut holding the inpeller has to come off it is probally frozen\015\012if it snaps off then the pump assy willl have to be replaced or at least the motor, you need to get below the impeller to see what is down there though, or let it run as ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Our dishwasher isn't cleaning very well, and I noticed that there looks like a scaley build-up on the heat element and looks like the holes are plugged on the washing arm. Is there anything that we can add to the water to disolved this build-up?


You can use any kind of calicium lime and scale remover to help clean the dishwasher,there are also several kinds of dishwasher cleaner that can be bought from most any store around. it may take a couple of times for this to work and clean the dishwa ... Moyer Diebel 201LT Dishwasher

My sound conditioned Whirlpool dishwasher is real old. It fills up completely with water. It looks like it will overflow, so I stop it. I thought it always started washing from the start. Do they always fill completely up with water, then start washing. I never noticed. I am afraid the water will overflow. Can it? Last time I ran this, it had a real loud motor. I used to hear the motor running from the start, but now I don't, just water filling up to what looks like overflow if I let it. I baile


... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

My dishwasher is making a noise and will not drain. when I looked underneath, the thing that connects to the hoses was what was making the noise. It looks like some sort of motor and has copper coils in it. the water from the dishwasher flows to it and I guess it pushs the water on threw.


Hi,\012Here is a tip that I wrote that will help you with your dishwasher not draining problem...Dishwasher Problems - ... Frigidaire 24 in. FDB1250REC Stainless Steel Built-in Dishwasher

Hi I have a mdb6601awb maytag dishwasher. Sometimes when it starts the wash cycle it will make a loud squelling noise. Then if you pull on the handle and stop it, the machine will start and sometimes the noise will be gone. Or you may have to do this 3 or 4 times before it will stop making the squelling noise. I do notice when I pull up on the handle to stop the machine it makes some clicking noises and then the noise goes away. Thank You for any help you may be able to give me!!!


I don't have a solution however I have the same problem with that same model. ... Maytag 24 in. MDB6601AWS Stainless Steel Dishwasher

Model number 66515632000 Kenmore Ultra wash with quite guard about 8 years old Washer stopped near end of rinse cylce, dishes look clean, water in washer did not drain and looks clean. All attempts to restart washer, or hit drain etc result in attempt to start and then it stops. sounds like trying to start a car with a very weak battery.


Unfortunately it sounds like you have one of two possibilities. A) You have something like a piece of glass or food ect. that has worked its way down into your pump and is tying up the impeller or pump as its trying to start. -To op ... Dishwashers

My dishwasher has got loads of water in the bottom, I ladelled it out and removed the filters etc but couldnt find out how to remove the final one, it looks like I need a star shaped screwdriver?, tried a posi drive but this didnt work. when I switch it on it fills and makes the right noises for a bit and then stops and does a kind of ticking noise intermittantly.


... Neff 24 in. S5453X1 Built-in Dishwasher

I have a portable kenmore ultra wash 2 bought used, I see where drain hose ends up at with some type of valve at end in sink area (that also hooks to faucet) but what is supposed to direct water into sink looks like it would spray out


... Kenmore 17252 Free-standing Dishwasher

My Defy Dishmaid Silent makes a loud knocking noise when i start the wash cycle, it fills with water but dose not wash.When i start the wash cycle it sounds like it is washing with the added knocking noise but at the end of the cycle the salt has been released but nothing has been washed.A few weeks ago it would run the rinse cycle but now it will not wash on any of the cycles.Please advise.


... Dishwashers

Maytag HDB8600AWW Dishwasher had been making noise (thought might be water valve, like previous DW), eventually stopped draining water, water now in bottom, I've let sit for couple weeks, looked inside, water was gone, I tried running again, it filled with water, but heard humming control panel noises for first time, then shuts itself off. Also, my handle needs replaced. Please let me know as soon as possible. Thanks in advance. David Weaver


Hi David\015\012\015\012The hum and all the noise that you have mentioned in your post states that the issue is with the pump and motor assembly. Please check the drain hose and try to clean the drain pump filter for any clogs, obstructions. Af ... Dishwashers

I have a DU1055xtss3 dishwasher. It is about two years old. It does fine cleaning the dishes but about a week ago it started making really loud noises. It sounds like it is straining. This dishwasher was never very quiet but it is super loud now. We looked around inside and used a flashlight to see deep inside, everything looks good. Do you have a suggestion. Should I have a plumber check it out?


First find out where the loud noise came from,then check the water supply then check the drying fan maybe some screws are losing ... Whirlpool DU1055XTS Built-in Dishwasher

Bosch dishwasher Does not heat up in the washing cycle and does not drain down at the end of the cycle. End of cycle the display sticks at 1 and the drain pump operates until the machine is switched off or reset. Followed the suggestion in another thread to look for a burnt solder joint on the control board. Unfortunately my machine is a later model than the board shown and has no poor joints on the board. It would seem from previous answers that the problem is either the controller, the heating


1) The water must be preheating by heating elements and thermostat see how to do it.\015\0122) Timer , test for defective,clean the contact, repair wires for loose, broken, or burn.\015\012\015\012God bless you.\015\012 ... Dishwashers

I have a Kenmore Quietguard Standard model 587 Dishwasher. It's about 3 years old. Lately, it has been running fine through the first hour and then towards the end, it will pause and the "Hi Temp" and "Heat Dry" like will start blinking at the same time. It's like it is stalled. When this happens, I open up the door and look at the bottom of the dishwasher were the screen is, and I see there is standing water. I press the "Start/Cancel" button to help it drain all the way, which it does, but th


Hi,My take on that would be a bad heating element....the dishwasher is looking for the heat from it and that never happens....so it goes no further and gives the alarm....I would get someone to check that heating element out and replace i ... Kenmore Dishwashers

My top dishdrawer is dead it is a dd601 the seals are deflated bottom one works fine looks like it died near end of wash as there is water in it and the dishes look kinda clean


Hi \015\012Please refer to the link below as it is the service manual. Run diagnostics as instructed. This should help.\015\012Mat\015\012htt ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

The inside of my stainless steel dishwasher looks as if it has a white film on it. My glasses are also looking like they are etched. I haven't changed the dishwasher soap...any ideas what is causing this? The dishwasher is about 4 years old, and we've only noticed this in the past few weeks.


Are you using a rinse agent such as jet dry( you should be) and if your using tabs with rinse aid built in dont add extra rinse aid to dispensor, . water temp might be an issueperhaps some detergent has gotten into the rinse aid compartment mistakenl ... Dishwashers

I own a Miele G977 Plus dishwasher. There is what looks like a vent at the top left corner of the door. During the course of a wash a noise that sounds like a fan comes from this vent. Whwn the wash is complete and I open the door of the dishwasher water flows out of the vent onto my kitchen floor. What is the problem and how do I rectify it. Tom


Hi Tom, welcome to Fixya.\015\012\015\012The issue is likely just the blower and housing drain hose blocked with "crude" from time & use. If you take the door panel off ( watch those edges they are VERY sharp ) and unfasten the control panel as well ... Dishwashers

After 3 years it just started making a loud noise, I am no expert but it sounds like a fan in a motor. I have only heard it today, but I am betting it will still happen next load too. I didn't change any of the settings, have been running the same way forever. When I did hear this noise I started pushing buttons to see if I could get it to stop, no good, no change. The cycle has completed and everything looks ok, waiting on the dishes to dry. Drainage has never been a problem for me either.


I would say this is a build up of lime.try changing your tablets and checking your salt levels.there is no fan .try what i say and see what happens.have you found a glass broken it could be as simple as that but i dont think its serious.adrian,,,, ... GE Nautilus 24" Built-in Dishwasher

I have a Bosch SHU8805UC/14 dishwasher. I took the front door panel off to install it better but ended up with two extra pieces that look like either part 935400 Door Guard, or 935526 Support. I cannot seem to find any place on the inside of the door where these pieces would fit. The dishwasher works fine but seems like it got noisier after I put it back together without these two parts. Can you help me locate the proper place for these 2 plastic parts?


Hello, \015\012\015\012Welcome to FixYa.\015\012\015\012I believe the parts you are referring to are likely the blocks in each corner of the outer door panel. These have been a sticking point for many I tech over ... Bosch Dishwashers

I just moved into a house that has a Maytag Quiet 300 dishwasher. After about 2 weeks, I'm hearing a VERY loud, almost grinding noise about 6-7 minutes into the wash cycle, then again near the end of the wash cycle. It sounds like a motor thing and I'm hoping to avoid a repair bill right now, the cost of the move wiped us out. Is this something that I can fix, and if not, will continuing to run the dishwasher with the noise kill it?


You can continue to run it. it may correct or else it will get worse.......then u can get back and i will help u decide what to do ... Dishwashers

My miele dishwasher is making a noise towards the end of the cycle, like a humming noise, the dishes are not rinsed properly and aren't dry.Model G2270 SCVI. Any ideas? Thanks, Mel


... Miele Premier-Plus Built-in Dishwasher

When we switch our Beko DE 2541 on its running straight away with the stop/start button being pressed. On the last successful cycle completed it just carried on making a noise like it was running and has been doing the same ever since. We have tried tipping the machine at 45 degrees as advised but it is still making running noise and not finishing.


Sounds like you have a water leak. The machine is fitted with a leak detection device that runs the drain pump constantly as a safety mechanism. If you want to look your self you will need to pull the machine out and tilt it back and if possible remo ... Beko Dishwashers

DISHWASHER MODEL # KUDS03FTBL2 WORKED VERY WELL UNTIL TWO TO THREE DAYS AGO DISHWASHER NOW LEAVES MASSIVE FILM AND DEBRIS (LOOKS LIKE FINELY GROUND UP GRAVEL AND DIRT) OTHER DISHES AND SILVERWARE HEAVILY COVERED WITH WHITE FILM ALWAYS USE RINSE AGENT THIS MESS IS A FIRST HAD TO SCRUB ALL DISHES AND SILVERWARE WITH LIME AWAY INSIDE OF DISHWASHER COVERED WITH WHITE FILM AND SOME AREAS HAVE BROWN/WHITE DEBRIS???? IS THIS A DISHWASHER PROBLEM??? OR IS SOMETHING WRONG WITH WATER???? WASHING MACHINE


There is a product out called the dishwasher filtration system. it filters the water going into your dishwasher reducing the hrad minerals that leave that white residue. it is very affordable and works amazing. it goes right under the sink and is e ... Dishwashers

My Kitchenaid KUDS01FLSS3 dishwasher is making an unusually loud whirring noise when it is in the wash mode. I am fairly mechanically adept, I like to get some ideas on what to look at so I can fix it and quiet it down.


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have been negligent in not cleaning out the filters and after the unit more or less stopped, I pulled the two filters finding them full of what looked like soap scum. I cleaned them best I could (but noticed the inner filter still had most of the small holes blocked) Started the unit and it cleaned alright for a couple of days. Last night after running a load all the water did not empty from the bottom of the tub? Any suggestion on what wrong? Bought the unit on 1/19/05. Thanks


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Dishwasher not draining properly or not draining at all issues\015\012can arise due to different reasons ... Bosch 24 in. SHX46A02 / SHX46A06 Built-in Dishwasher

Water pours out the other end of the pump opposite the pressure hose connection. It has a clear plastic cap with a small **** in it. Looks like water should escape here but way too much water being pumped out.


... Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0745 seconds