Having problems with your Whirlpool GU1100XTLB / GU1100XTLQ / GU1100XTLT Built-in Dishwasher ?
Runs too long
\015 We have a quiet partner 1 and last night we noticed that it was taking over an hour and a half and the load was still in the wash cycle! It was a very cold night. What do you think the problem is?\015
The water going into the unit needs to be 120 degrees for it to work correctly. the D/W is trying to heat the water up to 120 degrees. it will heat a degree a minute. depending on what the temp is in the washer. try turning on the hot water first before you turn the dishwasher on. verify that the water is 120 degrees coming out from the faucet.
Repair Help & Product Troubleshooting for Whirlpool GU1100XTLB / GU1100XTLQ / GU1100XTLT Built-in Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My dishwasher runs 2 hours as a complete cycle. I think it is never going to finish but I have not stopped it in mid cycle. Dishes are very clean but they should when it runs this long. I hear it change cycles so I know it is not stuck on 1 cycle. It also makes a lot of noise. 2 hours of noise. HELP!!! How long it it suppose to run?
That means that the machine does not detect that one condition to continue the cycle is met.Sometimes\015\012 when this happen unesperience repairers replace the timer board , an \015\012expensive part that rarely fails. The timer b ... Whirlpool DU1055XTS Built-in Dishwasher
Bosch dishwasher SHX46A -cycle runs too long (4 hours)- items still wet. The economy cycle also runs too long - should be about 80 minutes and it ran for 200 minutes.
It sounds like there's a problem with the dishwasher's heating element. The dishwasher uses the heating element to heat the water to certain temperatures, and it will wait (run for extra time) for the water to reach this temperature, and may eventua ... Bosch 24 in. SHX46A05 Stainless Steel Built-in Dishwasher
Bosch dishwasher runs too long, over 130 minutes on regular cycle, then when it gets to the final minute, it continues to run for a long time. The sanitized light doesn't come on, and dishes are not hot and not dry.
Http://www.acmehowto.com/howto/appliance/dishwasher/dishwasher.php\015\012\015\012Please find above, a troubleshooting how to ... Dishwashers
Dishwasher keeps running I have a Bosche dishwasher and the water keeps running. As long as we run it and don't stop it, the pump will continue to drain about every 3 minutes. The water just keeps running though. If we open it to empty the dishes, the cycle will stop. But the water keeps running, filling the tub, and then overflows, flooding the kitchen and drains through our wood floors to the basement below. Our ASKO seems to have a similar problem. I started the dishwasher, and the water ke
Open up the door, get out the control unit. Pry open the unit's plastic case and look at the board. Burnt spot? If so, the heater circuit burnt out (happens a lot on Bosches) and the control is waiting for the water temp to rise, but of course it ... Bosch SHU43C05 Stainless Steel Built-in Dishwasher
Bosch Running a LONG LONG Time and Watering Remaining
Hi,\015\012You could try running the machine with the drain hose leading to a large bucket. If it works OK in this situation then the blockage will be most likely where the drain hose joins the house drainage system - often at a junction under ... Bosch 24 in. SHU43 Built-in Dishwasher
Kenmore My dishwasher was in my home when I purchased my home. It is a Kenmore Ultra wash 2, I am not sure which settings to use for basic dishwashing. When I run it it runs for over 1 hour. I don't want it to run that long.
Make sure you run water in your sink until it is hot before you start the dishwasher. On the newer dishwashers they will fill and drain until the water is hot enough so it takes longer if it starts with cold water. Normal time for a basic wash coul ... Kenmore 15129 Built-in Dishwasher
My lg dishwasher is running ok but i randomly get the LE error code. I noticed that when it runs the cycle it takes 3 times as long to run than normal. Is this the motor or the electronic panel. the wiring is ok already checked.
Motor might have something blocked in the coils. mine did the same thing and found a piece of plastic melted in the motor housing ... LG 24 in. LDS 5811ST Stainless Steel Built-in Dishwasher
Siemens dishwasher is running very long with warm water only
Whirlpool Silent Partner 1 Dishwasher running too long in wash cycle
I feel sorry for next guy who sells you another appliance :) ... Whirlpool 24 in. DU1055XTPS Stainless Steel Built-in Dishwasher
How long is the dishwasher designed to run?
... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher
Frigidaire dishwasher won't end cycle - will run on and on for hours. Sometimes it cycles through, usually it just endlessly washes and rinses. I have to CANCEL the cycle, which causes the dishwasher to empty and run a few RINSE ONLY cycles (which are consistent, cycle time wise) to rinse the soap off of the dishes. Also, the door for the soap seems to stick - how long into the cycle before the soap door should open? Also, does opening the washer during it's cycle (to add more dishes) change or
I would say the resettable thermostat has failed. There is a thermostat which senses the water temperature, and when it fails, it causes the dishwasher to run constant. Replace the thermostat underneath the dishwasher and that should cure problem. P ... Frigidaire 24 in. FDBB540 Built-in Dishwasher
Hi, our dishwasher runs too long and smells bad. Seems to get stuck for along time during the heating period. The water coming in is hot enough but then after heating it for a long time seems to be more luke warm. Thanks, joe
Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers…Dishwasher Problems The ... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher
I have a Bosch SHE46CO dishwasher that runs too long. It adds an extra 37 min to the normal wash cycle. It counts down correctly until about 50 min then it adds the 37 min. Also when it get to 1 min it continues to run for at least 15 min. I have cleaned the filter and the upper and lower arm.
It can be the software or anly have a much colder water and it needed a longer time to heat for washing and rinsing. also a heater is damaged and the dishwaser runing at the half capacyty. so long! ... Dishwashers
Our Bosch model SHE44CO dishwasher run cycle has progressively increased. It now runs twice as long as it once did. Help????
Hello,Based on your description I'd say the issue is with the control. Bosch has had a history of this exact problem I'm about to lay out for you and this is the first thing I'd be looking for if called out to service the unit with the sy ... Bosch 24 in. SHE44C05UC Stainless Steel Built-in Dishwasher
I have a honda 8hp on a mortar mixer. it gets fule in the bowl but will not run long. lite iys just using the fuel in the bowl. It used to run great. It has sat for a year.
First thing to do is take the fuel bowl off.then turn the fuel tap on.fuel should be running out of the needle from the carby.if not, the needle and float is not working properly. turn the fuel tap off .spray some carby cleaner into the needle and se ... Honda 8 HP Engine
I have a GE Potscrubber 720 and there is water in the bottom of the dishwasher and I tried to clear it by starting a cycle and it still keeps water in the bottom of the washer. When I run a cycle there is caked on soap on the inside door and dishes and the dishes are filthy. I found a long thin piece of metal by the drain it is long and straight and a break on one end and an "L" shaped bend on the other.. Any ideas where to start looking for problems? As I have no experience in repairing dishwas
... GE 24 in. GSD2600GBB Built-in Dishwasher
KitchenAid KUDP01DLBS2 dishwasher. Runs for a very long time on any cycle; time does not seem to advance. (takes 2.5 hours or more for normal cycle. "sensing soak", "water heating" lights on for a long time, even though it appears that water is not being heated. Checked incoming water temp, is hot. Did not do this when new, something has changed. Typical cycle was 1 hr 10 min. before.
Sounds like the heater inside the dishwasher is not working. The machine is trying to get the water up to a preset temperature, probably in the neighborhood of 140 degrees. That is one of the things that it is sensing.After the machine fi ... Dishwashers
When I release the tigger the pressure washer stops running. Runs fine as long as trigger is depressed. What could cause this?
When the trigger is pushed, the engine is supposed to rev up to increase the pressure. So from the description, is sounds like the idle speed is simply set to low and it dies. So just set the idle speed higher. You could set it as high as pulling ... Briggs & Stratton Power Products 1539 Pressure Washer
Why do dishwashers have SO much longer run times today than those of the past? Our new Kenmore ''Ultr-Wash'' has extremely long run-times. How can that possibly be a good thing in terms of saving energy?
The latest models all pride themselves in doing a perfect job, almost silently, using much less water than the older models [thus the energy savings] as the most costly part of a dishwasher wash used to be the cost of the hot water. Your dishwasher ... Dishwashers
We have a Bosch SHE45M06UC/50 dishwasher that is acting a bit nutty, first of all the timers are all wrong, mostly too short for what the manual says except the quick cycle and it is too long. There is on some cycles a very long delay before it begins to fill and it seems to alternate between pumping and running randomly
Hi,\015\012\015\012The first thing to note with your make of D/W is the display only shows "estimated time" not actual time. There are just too many variables to give actual times, i.e. water temp. at inlet, drain hose length & diameter, as well as p ... Bosch Dishwashers
We have a Bosch Diswasher Model SHX-46A05UC that we purchased three years ago. We have loved it! This week it started running a long long time and won't finish on its own. Also the santitized cycle is not working. We live in a remote mountain town and our local appliance repair man refuses to work on it because it is a Bosche and he hates them. Please help! Can we do something on our own before having to pull the dishwasher and take it out of town for repair? Thank you...Jackie
... Bosch Dishwashers
NO PRessure i have a Honda gcv160 5.5 dt2400cs CRANKS RUNS FINE AS LONG AS TRIGGER IS pulled to let water trough it has no pressure soon as you let go pressure starts building then it kills the motor will not run unless you hold handel
Hi It sounds to me like your unloader valve is stuck, this is the thing that is meant to move up and down when pressing the trigger.Please remove the unloader valve assembly and check for damage. If no damage is found then grease and lubricate this p ... Honda Pressure Washer PSI 3000
My Bosch dishwasher runs long. I notice the water in the bottom isn't very hot. (I've turned on the faucet and let the hot water run before I started dishwasher.).
Hello,Welcome to FixYa. ... Bosch Dishwashers
I have a Bosch (SHU5302UC/U12). The washer often takes 2 or more hours to run. Sometimes it gets stuck for a long time part way through (e.g. just sits at "43"). Other times, it gets stuck at 1 and won't stop on its own. The latest thing is 2 dots have appeared on the display that I've never seen before. For example, instead of "43", it reads "4.3." Eventually it gets to "C.L." but does not stop running. Also, its been making very strange noises during part of the wash cycle.
... Bosch 24 in. SHU43 Built-in Dishwasher
My Kenmore diswasher runs over 2.5 hours to wash a load of dishes. I think the water is cold when it fills. Why does it run so long?
... Kenmore 24 in. 17512 Built-in Dishwasher