Having problems with your Whirlpool GU2400XTP Built-in Dishwasher ?

Blinking Light (Glass XPRESS) - Machine not running...

\015 My machine is now just over two years old and has stopped working - again. I had the motor replaced under warranty about a year ago (but I had to pay the service charge of $128!) and now this malfunction. My machine will not run, it only flashes the Glass EXPRESS light. \015\012\015\012I called the Whirlpool 800 Customer Service number and they will not honor their warranty unless I pay for a service call for the problem to be diagnosed by a qualified technician. I'm not sure I want to spend another $128 for a machine of questionable reliability.\015\012\015\012I tried the CS suggestion of cutting power for a few minutes to see if the machines internal computer would reset itself, but no luck. Any suggestions?\015

Answers :

Unless you use your machine heavily, the problem is probably a timer board. it also could be a door switch. it will not run if it thinks the door is open. and if the fill valve does not function, it will not enter wash cycle as there is no water coming in. most likely timer, but some replacement parts are rebuilds. you could have a failed pump again. its not the pump if the unit does not fill.
in any event, i would invest in a better machine rather than put more into the unit.
note: i am not sure why you paid a service call if the problem was under warranty. ask the mfg about that. the servicer may not be straight with you.
bosch makes a good machine, as does miele. both cost a bit, but don't have issues like cheaper machines. cheap machines are cash cows for servicers. i am not sure what you paid for the whirlpool, but i am fairly certain it was under 1200. something from 900 to 1800 would be a good choice for reliability. that not the most expensive. my commercial unit cost 3800, but does a cycle in 90 seconds. time does equate to money, and you know best how much this unit is costing you to deal with.
good luck
Repair Help & Product Troubleshooting for Whirlpool GU2400XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Blinking Light (Glass XPRESS) - Machine not running...

Unless you use your machine heavily, the problem is probably a timer board. it also could be a door switch. it will not run if it thinks the door is open. and if the fill valve does not function, it will not enter wash cycle as there is no water comi ... Whirlpool GU2400XTP Built-in Dishwasher

Good mroning after starting any program first the pump will run followed by water intake. After a while the machine stops and the light intake/drain starts blinking. Most of the time water will stay in the machine. After pressing the on/off bottom first switching the machine on again and starting a new program the machine pump start running emptying the water but than stops after a short water intake again. I opened the water stop but it seems to be ok. The filter inside the machine is cle

Good morning don't get shocked because ullu ki to abhi subah hi hui he ... Miele 24 in. G892SCU Plus Built-in Dishwasher

Hi...my dishwasher 'clean' light continues to blink. I can hit cancel and it sounds like the cancel cycle is running. After that the light keeps blinking and I can not start the machine. If you hit start the light goes on, then stops, and the clean light flashes again. Any clues? Thanks!

Sounds like the control board or panel is shot. What is the model number of the unit, and serial number? ... Dishwashers

A few days ago the dish washer was running fine, maybe a single wash every day. Then, out of no were the logic seems to have left the machine. If you pressed the "normal cycle" button it would blink for about 30 to 45 seconds then the front panel would go blank. All LED lights would turn off, like it finished doing the diskes, never running a single cycle. I unplugged the machine to let all circuits reset, that worked for two days, two washes in that time. Today I'm back to a machine that will n

Your control panel is faulty and will have to be replaced. This is the main brain of the machine. Normally when a cycle doesn't start the timer is bad, but when your control panel doesn't do anything, then it is faulty. ... Dishwashers

Kitchenaid dishwasher KUD1021RWH4 clean light is blinking and the machine won't run. How can I clear this?

... Dishwashers

I have an Ariston LS245 dishwasher, have just had the pump replaced, as it had shorted out, due to water in the bottom tray where the water detection float is, also a new drain hose fitted. Have just run a wash and after running a while, presumably to the end of the rinse, wash and dry cycle, then one of the cycle phase lights, the one for 'soak' blinks constantly. I switched the machine off and had a look to see if a wash had been done, the dishes look clean. In the book it says that if one

... Ariston Technologies Dishwashers

Hi, asko d3250 will fill and drain(when you press cancel) but the motor will not run. there is a light over the glass icon button that blinks when the motor will not run. what do you think the problem is? motor? circuit board?

This can happen because of multipal reason...The door switch is bad.Dishwasher's cycle selector switch has become defective.Just go through this link ... ... Dishwashers

I have whirlpool diahwasher ,model DU1055XTSQ3,quiet partner -1. when i start the machine the folowings things happen: 1.the machine does not start . 2.Start /resume light starts blinking ,after few seconds ( 40-50 seconds), the pots and pans light also starts blinkng .after some time ( 1 minute ) the normal light also starts blinking .All three lights start blinking 3. I have done the following to rectify the problem from the book : alnernatively pressed heated dry and normal keys for

... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Whirlpool GU2400XTPS6 glass xpress light is blinking continuously

... Whirlpool GU2400XTPS Built-in Dishwasher

The clean light is blinking and the machine will not run.

On "fix ya" i was able to access the problem and find out how to reset the error. this worked out great and save me a lot of money, anywhere from 139.00 for service to 400.00 for a new dishwasher ... Kenmore Dishwashers

Washing light is blinking but machine is not running.

Slam the ****** hard ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

Machine stopped running and control lights blinking and unresponsive

Unplug it for 15 minutes and try powering it up again,sometimes they glitch like a computer and this will reset them,otherwise get the diagnostic tech sheet from the toe-kick panel below the door and run the diagnostics and it will in most cases show ... Whirlpool Dishwashers

My Kenmore 10722 dishwsher NORMAL WASH light is blinking and the machine will not run

... Kenmore 24 in. 17022 Built-in Dishwasher

Normal wash light blinks, machine will not run. No reset key code exists on the kick plate or inside the washer door panel. I have cleaned to drain hose and hot water supply is ample. Thanks Model 16029

... Kenmore 24 in. 16029 Built-in Dishwasher

There was some ordinary dishwashing liquid leftover on plates when i placed into dishwaher and this caused foam. The machine had a spanner appear on display and blinking light with a beeping noise. whenever I turn the machine off from the power button, it would after a 1 minute turn itself on again. with the blinking light, beeping noise and spanner picture on display. 1. how do i turn off completely 2. what does spanner mean and how do i resolve.

Hello &\015\012Welcome to FixYa\015\012\015\012Spanner\015\012indicates that there is excessive water in the unit, and instead of leaving it\015\012open you can take off the bottom front panel of the unit and clean the ... Dishwashers

Miele g892 scu plus, about 5 years old. when on, all it does is run some motor (humming sound) and flash salt or intake/drain. No program lights on. Sometimes can be reset so rinse light comes on and nothing blinks, but humming motor still runs and salt eventually blinks. I removed toekick panel; there is water in pan. I disconnect drain hose, only a little water came out. Any ideas?

... Miele G892SC SS Dishwasher

Was running a wash cycle lastnight and it stopped running and the clean (green) light is blinking and won't turn off. When I push the Start button, there is a red blinking light. Help. It is a Kenmore Stock # 16033 Type 575-0 and Model 665.16033401.

Is your washer a front load? Does it have a small window where you read the stages or minutes left?\015\012If so is there a code flashing in thet window?\015\012Also what year is your model? ... Kenmore Dishwashers

Clean light blinks 7 times pauses 1 second and repeats. will not work. the light above the clean cycle indicator blinks 7 times. I can not run the dishwasher, When I press start the light above the start button blinks and will not start

Hi there,\012Well first of all you reset this by pressing - High Temp Wash, Heated Dry, High Temp Wash, Heated Dry, High Temp Wash.If you don't have a heated dry then use "air dry"This sequence help you to reseting the e ... Whirlpool GU2400XTP Built-in Dishwasher

I have the Whirlpool DU 1100 dishwasher and the clean light kept blinking. I did the heated dry, normal combination and got it to run through the diagnostic check and sure enough it cleared the lights and appeared ready to run. When I would start it up again it would run the water and then get to the soad wash cycle and stop. No more lights it just stopped. I have been through the diagnostic process 3 times and still same problem. HELP

... Whirlpool Dishwashers

My Kitchen Aid Model KUDPO1FLSS5 dishwasher does not turn on. The lights all light up when selected. When I press start it used to blink all the lights and begin to run. Now, none of the lights blink and the cycle never starts.

... Dishwashers


... Electrolux 23 in. ESL6114 Built-in Dishwasher

The "clean" light blinks 8 times, then there is a pause, then it blinks once. The dishes are clean but not dry, as if it has not completed the drying cycle. We had an engineer out to fix it who said it was the circuit board and that the blinking light code indicated "too much suds", he replaced the circuit board, but it didn't make any difference. It's an intermittent problem: sometimes the machine completes its cycle OK. I ran it with just vinegar and nothing else in (no detergent, no dishe

... Kenmore Dishwashers

Three year old Amanda dishwasher won't run. Normal wash light flashes continually Turn off power and cancel light flashes five seconds machine tries to run five seconds then back to flashing light.

... Dishwashers

Unable to start dishwasher, only functioning light on the panel is the cancel/drain light. push that button the machine funtions for a minute or two and shuts off,also the light above normal wash is blinking. When the machine last functioned it would start with a very high decibel level.If its the circuit board I need an approximate replacement cost. Bob

If you go to searspartsdirect.com you can get the exact cost of the module. ... Dishwashers

I pressed the POWER button to turn on the dishwasher. I pressed the SELECT button, hit HEATED DRY button and the LIGHT WASH buttons. I then hit the START/PAUSE button to start the cycle. All lights came on as normal & I heard the machine trying to **** up water like it normally does. Within 5 minutes or so, the machine started to BEEP & BEEP every minute. When I came to the check why the beeping noise was on, I saw that all the WASH PROGRAM lights were all blinking. I hit the START/PAUSE

... Haier ESD210 / ESD211 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1365 seconds