Having problems with your Whirlpool GU2400XTP Built-in Dishwasher ?

Whirlpool gu2400 clean light is blinking 7 times

\015 The clean light blinks 7 times, stops for a second, then blinks again 7 times, and continues to do this.\015\012What buttons can you push to stop this\015

Answers :

Yes this is a heater fault detection error. The unit may not be heating the water resulting in unsanitary dishes so the unit shuts down in this fault. Also the door may not have completely shut resulting in the heater not working, but everything else does (the heater common line is broken at the door switch. Clear the fault by entering diagnostics with this key dance heated dry, normal, heated dry, normal. All the leds will light, you can then press cancel and try another wash cycle. If fault occurs again, you must repair heater problem.
Repair Help & Product Troubleshooting for Whirlpool GU2400XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool gu2400 clean light is blinking 7 times


Yes this is a heater fault detection error. The unit may not be heating the water resulting in unsanitary dishes so the unit shuts down in this fault. Also the door may not have completely shut resulting in the heater not working, but everything else ... Whirlpool GU2400XTP Built-in Dishwasher

The model is a Whirlpool # du1055xt5q3 I received infomation on how to get the clean light to stop blinking. I pushed the NORMAL WASH then HEATED DRY buttons in sequence and that worked, now it is doing the same thing and that doesn't work now. The light blinks 7 times at a time.Can this be fixed ?


Hi,The blinking always refer to a certain problem. 7 times blinking refers to defective heating element or control board.USUALLY 99% PEOPLE HAVE FAULTY CONTROL BOARD. YOU WOULD BE LUCKY ENOUGH IF YOU WOULD ESCAPE.R ... Dishwashers

I have a Whirlpool Quiet Partner 2 and it simply won't start. The little GREEN light about the CLEAN button is blinking 7 times and then pauses. Then it blinks 7 times. Then pauses. It does this over and over.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If the clean light flashes 7 times, pauses, and then repeats. When\015\012the dishwasher doesn't sense a ... Whirlpool Dishwashers

Whirlpool dishwasher clean light blinks 7 times


... Whirlpool Dishwashers

Whirlpool disher whirlpool dishwasher clean light blinking all the time cannot start whirlpool dishwasher


Run diagnostic by pressing Normal, heated dry, normal, heated dry, normal heated dry. a total of 3 times in 15 seconds. The dishwasher will reboot and run a test load. ... Dishwashers

I have the Whirlpool DU 1100 dishwasher and the clean light kept blinking. I did the heated dry, normal combination and got it to run through the diagnostic check and sure enough it cleared the lights and appeared ready to run. When I would start it up again it would run the water and then get to the soad wash cycle and stop. No more lights it just stopped. I have been through the diagnostic process 3 times and still same problem. HELP


... Whirlpool Dishwashers

I have a DU1050 Whirlpool dw and the green light was blinking 7 times. I did what you suggested and the dw reset itself and now works. Now my dishes on the top rack are not getting cleaned. The bottom shelf is cleaning fine, the top dishes are wet, but still dirty. Please help


... Whirlpool 24 in. DU1050SS Built-in Dishwasher

Clean light blinks 7 times pauses 1 second and repeats. will not work. the light above the clean cycle indicator blinks 7 times. I can not run the dishwasher, When I press start the light above the start button blinks and will not start


Hi there,\012Well first of all you reset this by pressing - High Temp Wash, Heated Dry, High Temp Wash, Heated Dry, High Temp Wash.If you don't have a heated dry then use "air dry"This sequence help you to reseting the e ... Whirlpool GU2400XTP Built-in Dishwasher

I have a kenmore dishwasher mdl#665.16022401the clean light blinks all the time and i push the cancel button and then wash and the start and the start button light blinks 3 times and nothing happens.the clean light is still blinking.


... Dishwashers

I have a Kitchen Aid Dishwasher KUDROITJBLO that has the "clean" light blinking 7 times. I have cleaned the filter but that did not help. I have shut the power off but when I turned the power back on the clean light start blinking 7 times. Any suggestions?


... KitchenAid Dishwashers

I have a Whirlpool GU2700XTSB1 dushwasher. It stopped one day and cleanning light was blinking. I was able to reset the dishwasher by pressing two of the button 3 times. Now when I run the dishwasher it fills the bottom with water, heats the water and then buzzes. The wash motor does not spin. Any help?


... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Gu1200xtkq0 clean light blinks 7 times - Whirlpool 24 in. GU1200XT Built-in Dishwasher


... Whirlpool 24 in. GU1200XT Built-in Dishwasher

Blinking clean light on my Kenmore 665.17052400 7 times Did the "reboot" normal wash,heated dry sequence which made the machine work for a while. then it would go less times in between needing to be "rebooted", now it will not go through a cycle w/o the clean light blinking even following a reboot. what is my next step? I have heard that this means the microprocessor will need to be replaced. is it even worth it?


No its about a buck forty but im sure you could do it your self ... Dishwashers

Clean light blinks seven times - Whirlpool Dishwashers


... Whirlpool Dishwashers

Why is My whirlpool quiet partner II the clean light blinks seven times


... Dishwashers

The clean light blinks 7 times - Whirlpool 24 in. GU3200XTP Built-in Dishwasher


\015\012Hello & Welcome to FixYaFlashing clean light is reset by pressing two buttons in sequence 3-4 times, to reset your kenmore press these buttons in sequence: ... Whirlpool 24 in. GU3200XTP Built-in Dishwasher

Whirlpool Quiet Partner II clean light blinks 7 times


The clean light flashing 7 times is an error code indicating an issue with the wash temperature. If the control does not detect a 4*F temperature rise in the main wash cycle, it will display the fault as the clean light flashing 7 times. There are se ... Whirlpool Dishwashers

Kitchenaid does not do the program, I can start the program, but about 15 minutes into the program the program stops and the light jumps to clean light which it 7 times blinks pauses and 7 times b


Clean all the buttons , one must be stuck , push all the buttons and un stuck them.... ... KitchenAid Dishwashers

The green clean lights blinks constantly, It will not allow me to cancel and when I try to start a new cycle the start light blinks a couple of times then the clean light starts again, but nothing happens.


... Whirlpool 24 in. GU2548XTP Built-in Dishwasher

The "clean" light blinks 8 times, then there is a pause, then it blinks once. The dishes are clean but not dry, as if it has not completed the drying cycle. We had an engineer out to fix it who said it was the circuit board and that the blinking light code indicated "too much suds", he replaced the circuit board, but it didn't make any difference. It's an intermittent problem: sometimes the machine completes its cycle OK. I ran it with just vinegar and nothing else in (no detergent, no dishe


... Kenmore Dishwashers

Whirlpool dishwasher clean button blinking 7 times


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

GU2400XTPQ6 Whirlpool Clean LED blinking 7 times


... Whirlpool GU2400XTP Built-in Dishwasher

I have whirlpool diahwasher ,model DU1055XTSQ3,quiet partner -1. when i start the machine the folowings things happen: 1.the machine does not start . 2.Start /resume light starts blinking ,after few seconds ( 40-50 seconds), the pots and pans light also starts blinkng .after some time ( 1 minute ) the normal light also starts blinking .All three lights start blinking 3. I have done the following to rectify the problem from the book : alnernatively pressed heated dry and normal keys for


... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

My kenmore 575-0 dishwasher is blinking green on the clean light and every time i try to start the machine the clean light blinks even more and doesn't wash the dishes.


Mine started doing that 3 weeks ago. Did you get a 'fix' for the problem? ... Kenmore 24 in. 16029 Built-in Dishwasher

I have a Whirlpool DU1048 that started out with a blinking clean light. I reset the dishwasher by pressing the heated dry and normal buttons twice. That worked the clean light stopped blinking. The problem now is the dishwasher seem to be stuck in the wash cycle. I finally have to turn it off after over an hour washing. Is this possibly a heating element problem? is that user replaceable?


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0988 seconds