Having problems with your Whirlpool GU2400XTP Built-in Dishwasher ?

Lock light is on and dishwasher will not operate

\015 The light near a lock picture is on and the dishwasher will not operate. If I hit any button the light blinks but does not do anything.\015

Answers :

To turn off the lock
\015\012Press and hold HEATED DRY for 4 seconds. The light turns off.


Here is the manual:
http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%208535039.pdf


See page 17.
Repair Help & Product Troubleshooting for Whirlpool GU2400XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwasher will not operate. Kenmore 665 13592K600. Quick Rinse, Heavy Wash, Heated Dry, and lock lights operate. Other lights do not come on. Door is closed tightly.


Control panel ... Kenmore 24 in. 16032 Built-in Dishwasher

Lock light is on and dishwasher will not operate


To turn off the lock\015\012Press and hold HEATED DRY for 4 seconds. The light turns off.Here is the manual: ... Whirlpool GU2400XTP Built-in Dishwasher

Dishwasher will not operate but "lock on" light is lit up.


... Kenmore 24 in. 17602 / 17604 / 17609 Built-in Dishwasher

My Kitchenaid dishwasher kudr25shbt1 will turn on by itself. The child lock light stays lit along with the cancel light and can cannot be turned off by pushing the energy saver button. The machine will not operate in this condition.What part has failed .


No question about it, the electronic board needs to be replaced. Often the capacitors break down and create problems like you are experiencing. ... KitchenAid 24 in. KUDR25SH Built-in Dishwasher

Dishwasher has a light on on panel under heat dry,looks like a lock. dishwasher won't operate


Hello,\012Press and hold down the button right above the light foe approx. 10 seconds,\012 The light will go out and the dishwasher will resume working order. This feature is a child lock. ... Dishwashers

The lock light will come on and can be shut off, the drain buttone will operate, yet no other controls on the diswasher work. Is there a sensor in the door for allowing the dishwasher to operate? Do you have any solutions for the problem that can be done by the average scew driver jockey. thanks


It is possible the controller is locked and needs a reset.\015\012If mains power off and on does not help then try this sequence within 5-8 secs.\015\012\015\012High Temp/ Heated Dry/ High Temp/ Heated Dry/ High Temp/ Heated Dry. Al ... Kenmore 13742 / 13744 / 13749 Built-in Dishwasher

Have a kitchenaid dishwasher KUDS25SHWH1 - the child-lock light came on and will not go off. It is a light and no button to push and hold except all of the select buttons for the type of wash you want, no air dry button. How do I get this light off?? The Child Lock light has come on by it's self and I cannot get it to turn off. I have never used this feature before. I have tried to hold the Energy Saver button for several seconds but the Child Lock light will not shut off. The dishwasher is loc


Unplug the unit for 15 minutes then plug it back in. This should reset all your computer system and make everything work again ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

We have a 10 yr Kenmore Elite Dishwasher in our winter home so in reality has only about 5 yrs worth of wear that all of a sudden the lock on light comes on and it will not operate we have tried holding the switch in for 4 seconds but does not help we turned the breaker off and back on washer worked for a few minutes but then shut off...Please advise


The most common type of door interlock is a heater operated delay \015\012lock, which\015\012is why some machines take a time for the door to release. So make sure \015\012you have\015\012waited a minimum of 2 minutes before you open these or conclud ... Kenmore Dishwashers

I managed to 'lock' the control panel on my maytag dishwasher and i can't get anything to operate. The lights just keep flashing at me. What or where can i find the unlock code?


Hello. No problem. Press the START/STOP button to stop the machine. Then check your watch as it takes up to two minutes to unlock the door. Next pull the door indentation opposite the hinges. \015\012\015\012If the door still won't open, c ... Dishwashers

How can I take the unlock the dishwasher? The locked light is on, and the washer will not operate. Help, please.


Try unplugging it for a few hours. In the meantime of it being unplugged, press and hold start cycle button for 5 long full seconds. Then wait half hour more, plug back in and see if it resets itself. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I have a whirlpool gold quiet wash p.us series 925 dishwasher and the controls locked light is flashing keeping it from operating


... Whirlpool Dishwashers

24" builtin Frigidaire Dishwasher, light on top of door says, Hold to lock. I can not operate the machine while this lite is on.?


Hello Ray E. Weaver - Sounds like the Child Lock option may have been selected. This is a safety feature that allows you to lock and unlock the controls to keep children from interfering with the wash cycle etc. Press and hold the AIR DRY pad butt ... Frigidaire Dishwashers

I have a KUDS25 dishwasher and the child lock is flashing. I have held down the "Energy Saver" button for the 4+ seconds and it still flashes. I have tripped the breaker for minutes, only to have it restart flashing. It ran perfectly until this issue yesterday. HELP!! It will not operate with this light flashing.


... KitchenAid 24 in. KUDS25 Built-in Dishwasher

Lock Control I don't have a manual for my dishwasher. The Lock button is on (top of dishwasher). I have pushed that top button for 3 seconds. The button on the top and the "L" then both blink. The button on the top then stays on and the "L" light goes off. Since I can't get the lock light to go off - - my dishwasher won't tun on. Thank you very much.


First try unplugging the washer from powerpoint for 30secs..this may disable lock.if not, some washers will still work on lock if you hold the buttons you need. for 5seconds. eg try starting washer as normal but hold the button for 5secs....(Ps you m ... Jenn-Air 24 in. JDB1050AW Free-standing Dishwasher

Kenmore Ultra Wash Dishwasher Model 665.15779 LOCK ON light blinking on control panel, unable to use washer. If buttons were locked, LOCK ON light should be lit continually not flashing. If you press and hold NO HEAT DRY button to disengage lock, nothing happens. If you press the CANCEL button it begins to blink in unison with the LOCK ON light. How can I stop the light from blinking to allow button function again?


... Kenmore Dishwashers

I have a Kitchen aide dishwasher Model KUDI01ILWH6 that will not turn on..there is a control lock light on and I have tried pushing the cancel button but all that happens is the control lock light flashes 3 times and the dishwasher still wont turn on....Please , how to I disengage the control lock


... KitchenAid Dishwashers

Lock light comes on and dishwasher will not run on water miser cycle


... Kenmore Dishwashers

Dishwasher inoperative The lights that indicate the wash cycle are flashing along with the 6 hour delay light. I have tried to cancel the cycle but it does not work. I shut off the breaker to try and reset the operation and that does not work. The dishwasher will not work and I cannot reset or cancel the flashing operations. Kenmore Quite Guard 3 Model 587 15072200


... Kenmore 15522 Built-in Dishwasher

Kenmore dishwasher Lock On light flashing


Holding the button for four seconds will not do it, you have to hold it until the light stops blinking and\015\012will go back to normal, normall takes more than four seconds to unlock the unit, this is something\015\012the sears repair t ... Dishwashers

My Maytag dishwasher goes for long stretches when it won't turn on even though I push the proper buttons. The buttons won't light either. It turns on by itself after a couple of weeks of sitting idle. Some of the lights may blink on the start panel while the dishwasher doesn't work, but only on occasion will it fully operate. I have turned off the power and turned it back on, hoping to reset the computer part of the dishwasher. It didn't work.


The Control Touch Panels like to fail on may brands - especially Maytag. They are sensitive to humidity - and a lot have the vents out the front - right by the control panel.Please reply using "continue with this expert ... Maytag Dishwashers

Kenmore Elite Dishwasher, Model 665.15979992 No Heat Dry Button/Light: The dishwasher will not work. Have tried to no avail the various alternatives listed in this thread and others. Here's what the dishwasher is doing: To start off, the red light on the "No Heat/Dry" button is on - sometimes it's on steady; other times it blinks depending on whether other buttons have been pushed. Pushing any other button also causes the "Lock On" red light to come on. Pushing the "Cancel" button causes all


Have you checked the thermal cutoff switch located inside the door by doing a continuity test to it if this is sounding like where your problem are is coming from on this diagram ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

The control lock light goes on as soon as I press the cycle to start the dishwasher. The dishwasher does not start, presumably because the control lock stays on. I do not know how to disable the control lock function. Pushing and holding the button for 3 seconds does not disable it.


Hello &\015\012Welcome to FixYa\015\012\015\012To unlock the\015\012controls press and hold the HEATED DRY button for 20seconds. If the problme\015\012returns then only option is touch pad replacement. Please get back t ... Maytag Dishwasher

Bosch dishwasher I have a month old Bosch dishwasher. It was stopped mid cycle. I drained the water at the bottom, but the active light keeps flashing, and when I press the start,reset button, then turn it off, it does the same thing when I turn it back on. active light keeps flashing and the wash light is on. It won't even lock the door. How do I fix this because there is no Bosch dealers here to help with the problem.


... Hotpoint 23 in. BF41 Built-in Dishwasher

I have a Fridgidaire dishwasher with a control lock feature that has now decided to lock!! There is nothing in the manual about this. The manual doesn't acknowledge this feature!! Ridiculous! Anyhow, my control lock light is on and I cannot run my dishwasher!!


On most control locks, the function is enabled/disabled by holding down the lock button for 3 to 5 seconds. Try pressing the button closest to the little lock symbol for 5 seconds. ... Dishwashers

Dishwasher Problem My Kenmore Ultra Wash Dishwasher has a light which state "lock" on and I can't cut it off or start the washer..Does anyone know what is locked and how it got locked and how to unlock it and start the washer?


According to my ultra wash dishwasher you have to hold the no heat dry button for 4 seconds and that is how you lock and unlock the control panel ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1280 seconds