Having problems with your Whirlpool GU2400XTP Built-in Dishwasher ?

Clean light continually blinks 7 times. what is

\015 I have the clean light blinking 7 times. I can re-set it but it comes back in the middle of a wash cycle. I accessed the diagnostic sheet behind the kick panel and apparently it has to do with the heater. I am hoping for a common failure to be around so I don't replace a possible four items. Any common problems with this particular model on the heater?\015

Answers :

It's your heater usually. sometimes you will find a burned wire at the heater terminal. try to repair the wire and see if the unit will run if no then you need to replace the heater. also could be your thermistate check the wires going to that as well. the thermistate is what send voltage to your heater if the thermistate is open it will never send voltage
Repair Help & Product Troubleshooting for Whirlpool GU2400XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi...my dishwasher 'clean' light continues to blink. I can hit cancel and it sounds like the cancel cycle is running. After that the light keeps blinking and I can not start the machine. If you hit start the light goes on, then stops, and the clean light flashes again. Any clues? Thanks!


Sounds like the control board or panel is shot. What is the model number of the unit, and serial number? ... Dishwashers

Model no. MDB6100AWW. Just unloaded the dishwasher. Shut the door and immediately heard clicking (regular cadence). All indicator lights (arrow-shaped) for clean, dry, wash and heating delay were blinking. Opened the door, waited a few minutes, closed the door. Now, just the "Clean" and "6 Hour" arrow indicator lights and "Heated Dry" button light indicator are still blinking continuously. Cannot override. What's going on? Dishwasher came with the house when we purchased it 6 years ago. Proba


Hi Thanks for using FixYa. To resolve this you will have to reset the console. Do this by closing the door and press these buttons in sequence...-high temp wash-heated dry ... Maytag 24 in. MDB6100A Built-in Dishwasher

Blinking lights My dishwasher has been blinking constantly " normal wash" and the "sanitize" option has been solid. When I try to press cancle it sounds as if it is starting to clean but then the noise stops and the light continues to blink. Is there anyway to reset it so my dishwasher can work properly again? Thank you


... Jenn-Air JDB3600AWP Dishwasher

Clean light blinks 7 times continuously


If the clean light flashes 7 times, pauses, then repeats...When\015\012the dishwasher doesn't sense a water temperature increase, it stops\015\012working and locks the functions (clean light flashes 7 times, all\015\012buttons are non res ... Kenmore Dishwashers

Clean light continually blinks 7 times. what is


It's your heater usually. sometimes you will find a burned wire at the heater terminal. try to repair the wire and see if the unit will run if no then you need to replace the heater. also could be your thermistate check the wires going to that as wel ... Whirlpool GU2400XTP Built-in Dishwasher

I have a modulogic ADP951.seemed to be stuck on cycle today so I stopped it. water did not drain. I cleaned all rotors and filters and re started. Water drained however start light now flashing. Have tried holding for 5 secconds to re start but only starts pumping out water (of which there is none) and then stops. Light continues to blink. Any other tricks??


I am assuming you have not tried the reset by turning mains power off and then on.\015\012\015\012One of the reasons for being stuck in the wash cycle is the water temperature is not reaching the right level. This could be due to heater ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

Maytag dishwasher I have a Maytag dishwasher 2001 Mod# MD85100AWB - Ser# 25257529ZD. I can not get it to run again after the last wash. The lights (clean, rince only, light wash, heavy wash, heated dry) continue to blink and won't clear. I tried to power it down and that did nothing. Do you have a suggestion to what I can do to run my dishwasher again?. Thx, Richard


... Dishwashers

I have a kenmore DW model 16019. The clean Light stays on the light does not turn off. I have tried to disconnect and have taken the motort apart to make sure everything is clean. What Can I do to solve this problem? 1. Does the washer work at all? No it does not work 2. Does it display any codes or flashing lights other than the CLEAN LIGHT being lit? no other lights are on except for the green blinking light 3. Is the light solid or blinking? blinking Green light 4. Entire model # is necessary


Thanks for re-posting with all the info!!The model # is 665.16019403The cleaning light blinking is a fault code listed in the tech. service sheet, its usually a faulty heating circuit.The sheet can be found behind the ki ... Kenmore Dishwashers

Whirlpool quiet partner II clean light blinking continuously, not


... Dishwashers

Kenwood Elite Dishwasher Mod#665.13779 K600 "Normal Wash " light blinks continuously with NO washer action. No other wash modes light up when pressed. Washer does not do anything. However, a couple of times I got it to make a noise as if it was draining, but then nothing happens. Push "Cancel" and it blinks in unison with Normal Wash light. Open door and close it, "Cancel" light goes out and Normal Wash light continues to blink. Have tried various combination of buttons to try to "Reset"


... Kenmore Dishwashers

I have the kitchenaid dishwasher model #kudv03ctss0.the clean light stay blinking and when i hit the start it just blinks and then stops but the clean light stay blinking constantly.if i hit the cancel button i hear a um noise as if it going to turn on but nothing happens and the light stays blinking. what do you think might be the issue .


Dear friend,\015\012ngfam at you service! happy to assist!\015\012It's an electronic problem!The lights are called codes and need to be diagnoed by a factory service person!!We sell appliances for 65 years an ... Dishwashers

Clean light continues to blink and cannot start new cycle


This may or may not help in your situation, but the following link explains how you may be able to clear the blinking clean light problem: ... Kenmore 15892 Built-in Dishwasher

I have a 665.16039401 kenmore dishwasher and the clean light continues to blink. I can not run any cycles


Ah, the famous (or infamous) Clean-light blinking problem. Watch that blinking light.... You say it blinks 7 times, pauses, and repeats, right? Well, 7 blinks which means "water not heating error". This could be caused by a bad heating element, a ... Kenmore 15129 Built-in Dishwasher

Clean light continuously blinks, dishwasher will not run.


Hello\015\012\015\012Clean light issue can be resolved by pressing the HIGH TEMP WASH- HEATED DRY buttons for 3-4 times. Please get back to me if you have any other questions.\015\012\015\012Kevin ... Kenmore 15899 Built-in Dishwasher

The clean light blinks continuously on my kenmore model 665.16034402 dishwasher


... Kenmore Dishwashers

My Kenmore dishwasher model number 665.13833K601 (purchased in '07) will not run. The clean light blinks continuously. We have tried pushing


... Kenmore Dishwashers

After starting dishwasher to do a normal wash with heated dry, the dishwasher stops and Clean light blinks 7 times, pauses and this continues until I reset the machine. After reset it goes to rinse only and goes for a minute or so and stops.


Hi\015\012\015\012Please check if the clean light is blinking 7 times. If yes then please reset the power to the dishwasher. After, 5 minutes check if you are still getting the same error. If yes, then it is a water heating fault. To reso ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

The clean light continues to blink. It will not wash. I unplugged the electricity of a while and it did not help Kenmore Mod 665.1342K601 ser # FY2147445 about 14 months old


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. To resolve this you will have to\015\012reset the console. Do this by closing the door ... Kenmore Dishwashers

I have a Whirlpool Quiet Partner II dishwasher and it is stuck in the clean mode the light continuous blinks


Duplicate\\ ... Dishwashers

Clean light blinks continuously on and off and dishwasher cannot start a regular cycle or any cycle but when I keep pressing cancel/drain it will begin that for 2 minutes and then right back to same problem


This may or may not help in your situation, but the following link explains how you may be able to clear the blinking clean light problem: ... Dishwashers

Model KUDROITJWHO will not start. Light for clean continues to blink and will not go off.


... KitchenAid Dishwashers

I have a Whirlpool Quiet Partner II dishwasher and it is stuck in the clean mode the light continuous blinks


THat means that something is wrong with the water temp. It is either not hot enough when it fills or the heating element that increases the temp it bad. To start the Service Diagnostics Cycle, press thefollowing keys, in order, in less than 6 se ... Dishwashers

Clean light blinks 7 times pauses 1 second and repeats. will not work. the light above the clean cycle indicator blinks 7 times. I can not run the dishwasher, When I press start the light above the start button blinks and will not start


Hi there,\012Well first of all you reset this by pressing - High Temp Wash, Heated Dry, High Temp Wash, Heated Dry, High Temp Wash.If you don't have a heated dry then use "air dry"This sequence help you to reseting the e ... Whirlpool GU2400XTP Built-in Dishwasher

I have a kenmore dishwasher mdl#665.16022401the clean light blinks all the time and i push the cancel button and then wash and the start and the start button light blinks 3 times and nothing happens.the clean light is still blinking.


... Dishwashers

Kitchenaid dishwasher - green light blinking on clean cycle.


... KitchenAid Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1236 seconds