Having problems with your Whirlpool GU2400XTP Built-in Dishwasher ?

Whirlpool GU2400XTP clean light flashes 7 times. User Guide says heater malfunction - (why does the machine have to become inoperable with a heater malfunction? Grrrrrr....)


Answers :

Easy there tiger. at least your machine will tell you what to fix. alot of people on here write in because their machine will run and run and never move the timer. they have no idea that if the water is not hot enough, the timer will not advance to another cycle. confirm the diagnosis with a multimeter and replace the heating element, if needed. checking the connections on the element may be enough. good luck
Repair Help & Product Troubleshooting for Whirlpool GU2400XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Whirlpool GU2400XTP clean light flashes 7 times. User Guide says heater malfunction - (why does the machine have to become inoperable with a heater malfunction? Grrrrrr....)


Easy there tiger. at least your machine will tell you what to fix. alot of people on here write in because their machine will run and run and never move the timer. they have no idea that if the water is not hot enough, the timer will not advance t ... Whirlpool GU2400XTP Built-in Dishwasher

Heater circuit the clean light is flashing whirlpool csr says heater circuit malfunction you need a service call


Whirlpool dishwasher won't go into washing cycle ... Whirlpool Dishwashers

Whirlpool dishwasher model number GU3600XTSY2 is flashing: The clean light is flashing! It's not the heater circuit either. It says the dishwasher is malfunctioned. Call for service to check heater circuit.Won't start at all.


The clean light sometimes flashes and just needs to be reset. To do so hit the keys in the following order. <Heated Dry> <Normal Wash> <Heated Dry> <Normal Wash> <Cancel>.The dishwasher will go through a cancel cyc ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Dishwasher clean light is blinking- manual says the heater circuit is malfunctioning. how do i fix it?


The problem is usually attributed to water supply temperatures\015\012being too low when filling. Apparently, there are some issues with the\015\012temperature sensing circuits in some dishwashers that causes an error\015\012code to be generate ... Dishwashers

The clean light is flashing and the instruction manuel says, that the unit has malfunctioned and to call a service tech to check the Heater circuit. I have unplugged the unit and it did not help


... KitchenAid 24 in. KUDP01DLBS Free-standing Dishwasher

I just finished a service call for my 5312UC/UC12. The tecnician says he saw water leaking under neath the machine but hoses were secure and no visible crack to the motor housing, The machines pump works but very little water is actually put into the tub, hence no dishwashing. This technician says that this is a repair that most technicians avoid because it takes a long time and costs alot and violated some sort of warranty. He recommend replacement after only 7 years!


This leekage may come from thermostads water isolation ring, just under rezistance leads. There must be a ceramic holder to fix it to rezistance. İf it is broken, thermostad may go down, or rezistance leads isolation (lastic washer) may leak wat ... Bosch 24 in. SHU66C05 Stainless Steel Built-in Dishwasher

Kitchenaid dishwasher The clean light was flashing 7 times, so I did read and try the solution SaniRinse-EnergySaverDry-SaniRinse-EnergySaverDry and this did get the machine to unlock and start up. Thank you! But I'm noticing that no watre is going into the machine. I can hear it drain some water. It is very hot and steamy in the machine so no heater problem, but I don;t see any of the soap on the bottom of the machine rinsing away. I'm afraid its stopping because the motor is overh


... KitchenAid 24 in. KUDP01IL Stainless Steel Free-standing Dishwasher

The dishwasher stop during the wash cycle. It did finish draining the water from the tub. The machine is not showing a power signs, I check the circuit breaker and the fuse is not tripped. I open and closed the door and the door latch seems to be working fine. There is just no power to the washer. Usually when a machine breaks down, there still is power or buttons that light up on the front of the machine. I looked on the internet and many say that the fuse could be tripped. No where can I find


... Whirlpool DU912 Dishwasher

Dishwasher sounds as if it starts cycle, then stops, bleeps, and Fat and prewash lights come on. Manual says to turn off machine, turn off tap, wait 30 seconds and turn it all back on, but it doesn't make any difference. Manual says 'If the above does not solve the problem, check that the water feed pipe is not blocked' however, it doesn't say where this is, or how to do it. Please help!


Hi.You need to check the water inlet hose, that is the hose connected to house water faucet at the back of the dishwasher.Checck for blockage in the hose and ensure that the inlet hose is not blocked or kinked.If t ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have a whirlpool DWH B10W. Last week the main drain outside blocked and none of my service machines were working (not draining). The main drain has now been unblocked and every machine except the dishwasher are now working fine. The plumber has checked the drainpipes again and says all are now clear. When I try to use the dishwasher, after the initial drain it stops and starts beeping at me. I have also noticed that no water is going into the machine. What's happening?


The error most likely indicates a Long Drain Sequence (Drain Exceeds 8 Minutes) - Select 'cancel' twice to clear error code. \015\012 \015\012 \015 ... Dishwashers

Model # 665.17032402 Clean light is flashing. Manual says to check heater circuit. How is the heater circuit checked? How is the heater element assembly replaced?


You need to check the thermostats in the heater circuit as well. The element is held in place my 2 nust from the bottom where the wires attach.eric ... Dishwashers

I have a KitchenAid Dishwasher Model #KUDS03FTSS0 for about 1 1/2 years. Within the past week I have noticed it being noisier then before. I pulled off the bottom panel and the noise appears to becoming from the middle of the machine, an area that is covered by a semiclear plastic case. It has this noise when it is turning the spray wheel inside. Can this be the motor going bad? I installed the dishwasher and marveled at how Quiet it was. Now it's not that quiet machine in the kitchen.


The motor is going out. this is a warranted part, so call for service and just pay the labor ... KitchenAid Architect? II S SERIES KUDS03FT Stainless Steel Built-in Dishwasher

Hi, Zanussi dishwasher DE6344, when starting any program the machine start pumping (draining) for a while and then stops, lights start flashing saying that the draining is faulty. Checked the drainpipe and when adding some water the machine drains it perfectly, still the program won't start. Looks like it thinks there still water inside ? Suggestions ?


... Zanussi 24 in. DE6544 Built-in Dishwasher

HE error My LG LD-14aw1 is showing HE error code - Heater Circuit is troubled???. (Not as much as owner!!!). I have repaired several dry solder joints in the control module, which have been causing various operating failures, but the HE problem has got me stumped. Can anyone provide me with a wiring diagram of the machine and or the control module? I'd like to trace the heater circuit to see if I can find the fault. Many thanks


From the manual: Errors: HE: Heater circuit failure.Please call your Authorized Service Center or LGECustomer Service at 1-800-243-0000(US), 1-888-542-2623(Canada). ... LG 24 in. LD-12BW5 Free-standing Dishwasher

Error Ed i think i overloaded the machine and i heard a loud noise and now everytime i try to run the machine it says Ed on it what should i do?


... Avanti 18 in. DW19PSS Platinium Built-in Dishwasher

This is a top loader machine with no transmission and every 20th load starts chirping and throws water over the top of the tub ge wont admit problem but i got six that says diffrently machines have had new motors and mode shifter


Hi,\015\012 \015\012A chirping noise means that the motor bearing wear. This can also be checked for by taking the belt off and running the motor alone. The spilling of the water is a result of the drum rot ... GE Nautilus 24" Built-in Dishwasher

I have an zanussi LS6 and in the display it on and off shows the A1 and B2 and spills water. The problem though is not what normally comes with A1 and B2. Somehow the water gets to electrical parts and all power is out in the café. Several experts that has been to see the machine clame it has something to do with the electrical system - that measueres when there is enough water. They say it has something to do with machine having the salt container and they have all given up repairing it. I boug


... Zanussi 24 in. LS6E Free-standing Dishwasher

Indicator lights say there is no water entering the machine. The pipe sounds and feels like there is water flowing but it is not getting into the machine itself


If water is flowing, then you should see water enter the DW. You should also feel the water line becoming warm or hot, depending on if metal (copper), insulated metal (copper), or plastic.If the water valve is partially restricted due to accumu ... Fagor LFA-073 IT Dishwasher

DU1100xtpt6 stopped working - blinking clean light. Reapir tech says needs new logic board and heating element. Says logic board is under warrenty... can I get board from whirpool with out tech? Where I can buy correct heater? thanks!


If you have "good hands" and a technical orientation, you can manage it by yourself\015\012(board and heating element).\015\012In any case, before buying a new heating element, check element's resistance with a multi-meter, maybe there is no problem ... Whirlpool 24 in. DU1100XTPS Built-in Dishwasher

Zanussi dw927 not filling inlet valve changed,supply to machine ok, calls for water solinoid activates for about 30secs shuts off and machine does no more. cleaned out two blue plastic pipes situated under a plastic cover which were both blocked, and put a hose jet wash thru where they were situated to clean housing out, put blue channels back still not filling up and now the inlet solinoid wont switch off when when it should and programme advances heater now comes on with no water in.manually


... Dishwashers

Hobart LX30 Hey I just bought a Hobart Lx30 and we don't have a power source that can handle the 50 amp requirement. We got it at an extremely good price so we are trying to work around it. I was told that disconnecting the water heater would allow it to work in a standard 120 volt outlet. I did that and now I have another issue. The machine wont run unless the water is 160 degrees. How do i disconnect the sensor that restricts the temp so that I can run the machine at a lower temp?


Hopefully you took the suggestion to run the correct 50 amp 208-240 service to the unit.Converting the unit to an LX30C has a couple of pitfalls. The LX30C is connected directly to the incoming water supply, which should run 120-140 degre ... Hobart 24 in. LXIH-3 Built-in Dishwasher

KitchenAid dishwasher KUD1021RBTO clean light is flashing manual states malfunction Call for service to ck heater circuit. Anything I can do? How do I ck the heater circuit? Or can this be reset?


... KitchenAid Dishwashers

SEARS/WHIRLPOOL DISHWASHER Model 665.16014401. The CLEAN light keeps blinking and washer will not run. Op. instructions say to check the heater circuit. Heater element tests at 12.9 Ohms and thermo unit at 55 K ohm and the unit I beleave looks like overtemp cut out is less than 1 ohm. these look like good #s to me so I suspect the controller p/n 8564544. When I look up the number online I find it has been replaced with 8564546, but the only picture I can find of it looks like the connections are


... Kenmore Dishwashers

The heater element does not stop when the cycle machine is finish. I need to off plug the electrical wire. Some told me that my control board was broken. Is it possible because they told me that the piece was discontinue. The dish washing machine has been bought in 2003! What can I do


\015\012\015\012\015\012Hello, \015\012 \015\012Welcome to FixYa. \015\012 \015\012Beased on the description you posted..."The heater element does not stop when the cycle machine is finish. I ne ... Asko D1776 Stainless Steel Built-in Dishwasher

Hi, I get a problem reading " E4". I have now switched the machine off and on again, but still it says the same. Incidentally the machine has already pumped the water out, so the 'overfill" is actually not supposed to be a problem. It is KELVINATOR EXTREME CLEAN DISHWASHER, model KD14SS. Please help, how am I to get rid of this problem, I really do not have the time nor the money to get outside help! Anita Kleynhans


... Kelvinator MDP531RF Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0518 seconds