Having problems with your Whirlpool GU2400XTP Built-in Dishwasher ?

Not cleaning well at all. is there some kind of filter i need to clean out?


Answers :

IF THIS UNIT HAS NOT BEEN CLEANED OUT LATELY DO THIS.
BUY A D/WASHER CLEANING DETERGENT (ANY GROCERY STORE) AND READ INSTRUCTION HOW TO USE PRODUCT.
THIS WILL CLEAN ALL PARTS OF THE D/WASH THAT MAY BE CLOGGED..SOME TIMES THE ARMS ON A D/WASHER WILL BECOME CLOGGED .

ALL DISHWASHERS NEED TO BE CLEAN ONCE EVERY 3 TO 6 MONTHS WITH A CLEANING PRODUCT AS STATED ABOVE..

HAVE A GREAT DAY,LOVE FREDDY
Repair Help & Product Troubleshooting for Whirlpool GU2400XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Not cleaning well at all. is there some kind of filter i need to clean out?


IF THIS UNIT HAS NOT BEEN CLEANED OUT LATELY DO THIS.BUY A D/WASHER CLEANING DETERGENT (ANY GROCERY STORE) AND READ INSTRUCTION HOW TO USE PRODUCT.THIS WILL CLEAN ALL PARTS OF THE D/WASH THAT MAY BE CLOGGED..SOME TIMES THE ARMS ON A D/WAS ... Whirlpool GU2400XTP Built-in Dishwasher

Ld-1416T I have an LG LD-1416T dishwasher and the lower spray arm does not turn. The top arm turns and the top rack is washed well. I pulled everyting out and cleaned all the filters (which weren't that dirty) but still no luck. I could only get so much stuff out to clean before it looked like to go any further, I would need to gain access through the bottom. Are there more filters in the motor area which might need cleaning? I read that it could be the vario motor. Can I test this? and if s


If you have one spray bar working then there is enough pressure. There is only one pump. So you should check the spray bar to see if it is plugged. Also check the seals to see if they are bad. ... LG Dishwashers

We recieved a dishwasher that had tons of lime and scale. well i remove that mostly by hand by taking the bottom part and disassemblying it and soaking it in CLR and slowly removing the calcium lime and whatever else there was. but i am kind of a thorough person and the bar =on the back of the dish wash needs to be removed and the back of it cleaned and probably soaked also if not replaced but i will just clean it for right now if i can. HOW do you remove it? I need a step by step on how to remo


Instead of going through all that effort, and still not being able to get to everything, just use a product called "Dishwasher Magic". It is a dishwasher cleaner and disinfectant, and cleans limescale and rust out of the dishwasher by just running i ... Maytag 24 in. MDB4600A Built-in Dishwasher

GE quietcare 3 dishwasher doesn't clean dishes well. Is there a filter or something that needs to be cleaned? Dishes come out 1/2 clean, 1/2 not clean.


... GE Dishwashers

Our Frigidare Aquasurge has bits of food in it that remain on the dishes. Dishes are always rinsed before washing. The filter is clean and the spinning parts are clean as well. Is there another place that needs to be cleaned? Drainage is fine.


... Frigidaire Dishwashers

All of a sudden the dishwasher is not cleaning very well. It is about 4 years old. Never changed the dishwasher tablets . Is there a filter that needs to be clean ?


Wineskil,\015\012\015\012This has been a common issue in all dishwasher, there are solutions. I need to explain, if you dishes are cloudy/milky looking, you problem could be lack of phosphate which was removed in July 2010. Now if you unit has ... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

I have a GE Monogram dishwasher that doesn't clean the dishes very well. This last wash left what felt like sand all over the dishes although you couldn't see anything. Could we have installed it incorrectly? Is there a filter somewhere that might need cleaning?


... GE Dishwashers

The glasses and cups have specks in them that don't rinse out. The soap dish doesn't clean out. I have take all the arms apart and cleaned them. There is no build up. We live on a lake and use filtered lake water. I have tried every kind of detergent. Washer has never performed well. It is about 4 years old but only used in the summer.


Maybe try rinse aid like jet dry, some people forget to keep the rinse aid filled up or the rinse aid nozzle gets a encrustation build up from the rinse aid.Also check your water for hardness, you may need to use a water softener to remove hard ... Maytag MDB9600A Jetclean II Built-in Dishwasher

There is heavy chunks, as well as residue all over my glasses. Is there a filter I need to clean. It almost seems like it isn't draining properly???


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... KitchenAid Architect KUDS03CT 24 in Builtin Dishwasher

Bad Smell I run my dishwasher at least every other day. I've noticed lately it smells....kind of like rotten eggs? Is there a filter that needs to be cleaned out? If so, where is it located and how can I do this? We have soft water running through the dishwasher and water doesn't sit in the bottom. Please help.


Start your dishwasher with no dishes in it.\015\012Let in run until it takes on water and start washing.\015\012Then open the door and pour in 8 oz of white vinegar and let it finish the cycle.\015\012If this does not correct the sm ... Kenmore 24 in. 15932 Built-in Dishwasher

I have a Kenmore Ultra Dishwasher Model # 16761691 There is also a 3373971 number on the unit. There is a strong oder coming from the unit.Does the unit have some kind of filter that needs to be cleaned. Note the oder is not in the garbage disposer Advise Thanks Sam


... Dishwashers

Ge m# gsd5560g02ss dosent seem to wash well . Im wandering if there are filters besides the plastic one at the bottom,that need to be changed or cleaned perodicly


... GE Dishwashers

I've had my Nautilus for 6 years and it cleans very well - but now, it won't drain fully and pools at the bottom of the unit. I have made sure that my garbage disposal was cleared first, too. and that water was draining properly in the sinks. I will need special tools to unscrew the drain filter in the dishwasher, right, or can I just use a pair of pliers to turn the little knobs? I am always careful to rinse all food off the dishes before putting them in the washer, but I guess I wasn't careful


If your model has the screen across the back with the filter, then yes use your fingers or a plier to unscrew the pop up valve assembly at the very back center of the dishwasher. Most likely, the cone shapped part has deteriorated and is not sealing ... GE Nautilus 24" Built-in Dishwasher

I have a troy built pressure washer leaking gas from the air filter i looked around for advice and hurd bang against the carb and it will realease the float valve i did it and it worked but should i clean out the fuel in the filter area or the filter will it harm it as it is or should it be okay? the filter was soaked in gas dry now and when it happened the gas flowed from the air intake (behind the filter) if i need to clean out in there how do it do it and if i need a new filter


Definetly replace the paper filter and yes Lowes will carry them.if it does not leak now, I would leave it alone or you will be installing a nine dollar kit.The briggs kit # is 294260 is you choose to do it anyway ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

I have a KUDS03CTWHO KitchenAid dishwasher. It started not cleaning the upper tray well a few weeks ago and now the lower one is not getting cleaned very well either. I have disassembled and cleaned the 3rd level , upper and lower spray/wash arm assemblies as well as the feed tube assemble. These were not blocked or glogged. There appears to be less spray coming out of the upper and 3rd level spray arms they before but as I said there is no blockage. I also cleaned the bottom filter. There has b


\015\012Hi\015\012\015\012The issue seems to be with the float switch\015\012assembly that is bad and should be replaced. Please check this ... KitchenAid Dishwashers

My dishwasher spray arms were clogged with calcium buildup so I cleaned one and replaced the other. I also removed the fixed disc-shaped device underneath the lower spray arm and found the particle filter was clogged- so I cleaned it out. The dishwasher ran fine for a few times but then the filter clogged again, and again, and again. Now I need to make a routine of disassembling the parts to get at the filter every week because the filter no longer clears itself during the wash and/or emptying c


You may want to check your hot water tank. It may need drained and cleaned, Or you may have the rod in the tank disintegrating. Also check you water faucet areators to see if they have calcium pieces too. ... Maytag Dishwashers

I've had a Miele G 851 SC Plus Novotronic dishwasher for about 7 years. In the past few months it is not cleaning well . . . streaking of glassware and some heavy stripping of finish on flatware. Feel like something needs to be cleaned out or a rinse aid needs to be added or . . . ??? We've cleaned out the bottom basket but didn't seem to help. Can you help?


... Miele 24 in. Novotronic G851SC Plus Built-In Dishwasher

I've a Kenmore - Whirlpool dishwasher purchased in 7/2002(665.17574200), which seems clogged. T The ''Accumulator Assembly'' (8268429) filter is clean, and I've stripped the unit down to the plastic components. This has happened once before, and the repair person cleaned some kind of secondary filter, but I can't locate that filter on the parts diagram. I'm guessing it's below the ''Protector inlet'' (8268390). Either I buy a new dishwasher, which seems a waste, or I find out how to clear the


... Kenmore 24 in. 17572 Built-in Dishwasher

After running our dishes through a wash cycle we noticed there was still a lot of food stuck on the plates & glasses etc. We cleaned out the trap but due to the murky water in the well, we also pulled out the racks & removed the bottom plate. The underside was greasy and had a lot of grim stuck to it as well as the bottom of the drawer itself. We washed the filter trap, swing arm and plate in the sink. We loaded it with the dishes that previously did not come clean and ran a full cycle. The


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Does my dishwasher have a filter inside of it that needs cleaning my dishes smells fishy stinks i have used clr and others items to clean it and it still smells fishy if there is a filter where is it its a built in dishwasher in mobile home


Hi,Here is a tip that will help you with how to clean that dishwasher up and get it smelling good again... ... Whirlpool GU2400XTP Built-in Dishwasher

I have model DU810SWPU3 Whirlpool dishwasher that is 1 yr old. Plastic dishes appear to have a film on them when cycle is complete. The water also seems to drain slowly. I assume that what appears to be the filter needs to cleaned but I'm not sure how to remove it to clean it. Is the plastic area with all of the square holes on the bottom of the appliance the filter? That part is what seems to be clogged. Thanks!


The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the ... Tappan 18 in. MDR251RE Built-in Dishwasher

It keeps tripping the fuse. Have tried cleaning the filters - well, have cleaned the filters that immediately accessible, I assume those are the only ones. Changed fuse in plug, too, but that didn't make any difference.


Hello , the fuse will blow because theres a dead short in the dishwasher. 1 check the element with a multimeter this may have shorted to ground also there a possibility that the motor may have a short.then check the circuit board for any burn't par ... Siemens 24 in. SE25A266 ExtraKlasse Free-standing Dishwasher

Our Kenmore dishwasher 665.1726 doesnt seem to be cleaning as well. LAst time this happened a serviceperson cleaned out a filter where food debris had clogged the water flow. We were able to take off the bottom wash arm but couldn't figure out how to get the filter off (there are 4 screws holding it in place and one is under the plastic arm that caries water to the sprayer.


I had the same problem!\015\012\015\012The arm WILL come off....you have to pull the screen off. ... Kenmore 24 in. 15689 Built-in Dishwasher

I have a GE Profile, GSD4930X73WW, dishwasher. The upper wash arm is not spraying well at all. I checked the water line from the pump to the upper arm and it's fine. I cleared the filters and cleaned the float. I also took the inlet valve off and cleaned the screen. Although the washer works better overall, the upper arm still does not work well. Nothing appears to be in the upper arm assy to clog water from spraying out. All seems clear from the turbid sensor (next to the pump) through t


... GE Dishwashers

We have never clean the inside of dishwasher an wondering if there are filter or something that needs cleaning or changing dishwasher is not cleaning as good as it use to


I suggest everyone google [Phosphate free dishwasher detergent] that has cleaning issues. It will explain a lot of our problems since july of 2010. I am a technician and also have experienced this at home. A product called Lemi-shine has for the most ... Maytag MDB7100AWB Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1196 seconds