Having problems with your Whirlpool GU2400XTP Built-in Dishwasher ?

I have a whirlpool quiet partner 1 dishwasher. I ran a load and it worked fine, after the load finished the clean light keeps blinking and I cant do anything but cancle/drain. Is there something I can try to fix it?


Answers :

Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012This is the first thing I'd try, based on your description. On your control panel...If you press these buttons in sequence with the door closed it should reset the error code and you can run another cycle to see if it was a "one off" or if a problem does exist.\015\012\015\012Hi-temp wash-heated dry, hi-temp wash-heated dry...this should start an abbreviated diagnostic/test program which will run for a couple of minutes, let it complete.\015\012\015\012The clean lite being on indicates there was a heating fault during the last cycle, but there are many things which could cause this, the first step is to reset it and see what happens next cycle.\015\012\015\012Let me know how you make out and we can move forward from there. Good luck.\015\012\015\012Regards,\015\012\015\012Macmarkus :)
Repair Help & Product Troubleshooting for Whirlpool GU2400XTP Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a whirlpool quiet partner 1 dishwasher. I ran a load and it worked fine, after the load finished the clean light keeps blinking and I cant do anything but cancle/drain. Is there something I can try to fix it?


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012This is the first thing I'd try, based on your description. On your control panel...If you press these buttons in sequence with the door closed it should reset the error code and you can run anot ... Whirlpool GU2400XTP Built-in Dishwasher

Cant reset dishwasher at circut breaker.Same problem exsists even after that is tried. hot start, hot wash, heavy wash just blink and it will not start but continues make a beeping noisenothing happens is there anything inside the control panel that i can do to help


Hi.Ensure that you pressed the Start/Reset button to reset the beeping.Beeping and lights can indicate that the door was being opened duing cycle, or that there is a fault. If there is no error on display, and timer is beeping ... GE Dishwashers

Kenwood Elite Dishwasher Mod#665.13779 K600 "Normal Wash " light blinks continuously with NO washer action. No other wash modes light up when pressed. Washer does not do anything. However, a couple of times I got it to make a noise as if it was draining, but then nothing happens. Push "Cancel" and it blinks in unison with Normal Wash light. Open door and close it, "Cancel" light goes out and Normal Wash light continues to blink. Have tried various combination of buttons to try to "Reset"


... Kenmore Dishwashers

I tried the fix for blinking lights on dishwasher, it tried to cancel and then went back to one blinking light, now what?


... Kenmore Dishwashers

We live in an apartment and our hot point dishwashers timing is all off and i thought if i could fix it myself, i'd love to do that instead of calling our manager, i will call him, but if its an easy fix i'd like to try it out.. it will just stop in mid cycle, and you have to manually more it a fraction of an inch to get it restarted, then at the end it doesnt fully drain, and the drying takes forever, so if i cant fix it, i'll ask for a new one..


It might need a new mechanical timer (sounds like the timer is sticking) installed and the parts will cost money... so you might want to go the route of the manager. The dial that you turn to set the dishwasher is part of the mechanical timer. Someti ... Dishwashers

Bosch dishwasher model shx36l fails to stop pumping. The drain was clogged. I cleared the drain. Dishasher backed up, water overflowed. Clog has been fixed. Dishwasher will not stop trying to pump water out. There is NO water inside dishwasher. I wish to run another load however unit fails to respond. Pump is operating even when front door to doshwasher is open. Turning the power button to OFF is the only remedy to stop drain pump from operating. How to fix?


... Bosch Integra® 500 SHX46A0 Dishwasher

My smeg dishwasher seems to be permanently in wash mode. The light on the menu of settings no longer flashes, but permanently is on, and when I run a load it never stops. I hear the two beeps as if the dishwasher is starting a load so it seems to be cycling through over and over. How can I fix this and get the blinking light back? Thanks


You have a timer relay issue ,probable need a new board for it ,a cheap fix would be to time it and see how long it take to run full cycle and put a regulaer outlet timer on it or a alarm off your stove or what ever,save a couple of bucks ... Smeg STX2 Dishwashers

I have a Whirlpool GU1100 built-in diswasher that will not clear the pot & pans selection. It is stuck with the pots & pans and the cancel buttons lit and blinking. It will not start or clear. I have tryed to shut the power off for awhile and this has not helped. Other buttons can be pushed and will light but the other two remain blinking. If the clear button is pushed it will clear the other button but not the pots & pans or itself. Is this a problem I can fix myself?


... Whirlpool Dishwashers

Zanussi Dishwasher ZDT6053. Holding the On/Off button causes the indicator lights to work correctly, but as soon as you remove your finger from the spring loaded button, all the lights go off. Would guess that on/off button should electronically latch via the control board. Have removed mains power for 60 secs in the hope of a 'hard' reset, but no fix. Is there anything obvious to check or fix or must it be a replacement control board?


... Zanussi 23 in. ZDi6053SX Built-in Dishwasher

Hello, Our Fagor LFA-013SS Dishwasher hasn't worked in a few days. It stopped working when it beeped 3 times after doing a load. On the machine it says if it beeps 3 times it means there's no drainage. My husband and I tried to fix it but we're not handy! So we tried calling repair companies but so far no one can repair Fagor dishwashers...help! Thanks


... Fagor LFA013 SS 23 in Builtin Dishwasher

Maytag dishwasher model MDB7609AWW2 has a blinking clean light. I followed the advice on fixya (thankya!) and by alternating the normal and heated wash buttons I was able to return the lights to normal. However, once I tried to run a normal cycle, it didn't do anything other than fill and drain. I then ran the hot water faucet in the sink until hot and tried another new cycle, but no luck. Any advice is MUCH appreciated!


... Dishwashers

I have a kitchen aid dishwasher model # kudso1ij and it just blinks the rinse cycle button. if you try to push the cancel button it won't work. when you close the door it blink the 2 for just a brief second then goes back to the dashes. One night it just started on its own. Can you tell me how to reset it or fix this problem.


... KitchenAid Dishwashers

Dishwasher is 2 years old. Top shelf dishes not getting clean even on on heavy duty and sani rinse cycle. All arms move freely,tried the 2 cups white vinegar in an open container and run cycle. I thought that helped but a few days later we are back to the same thing. No debris around drains. Tried loading differently. I have called for a repair person,but is there anything else I could check on my own?


Sometimes the holes in the arms get blocked up,sweetcorn,rice etc, this then stops the arm spinning and water being sprayed onto plates etc, unscrew it and run water through the centre hole and see what happens. ... KitchenAid Dishwashers

WE HAVE A MAYTAG PLUS DISHWASHER ABOUT 3 YEARS OLD OR LESS. WE WERE GETTING READY TO WASH A LOAD OF DISHES AND THE LOCK BUTTON IS ON AND WILL NOT COME OFF, WE HAVE TRIED PUSHING THE DRAIN OFF BUTTON BUT IT WILL ONLY BLINK, WASHER WILL NOT RUN. LOCK BUTTON WILL BLINK 3 TIMES AND STOP WHAT DO WE DO?


Try holding down the drain button for about 5 seconds.If that still does not do it for you, try taking power from the machine to let it reset itself, easiest is to unplug the unit or flip the breaker switch for the section of the kitchen. ... Dishwashers

I have a whirlpool dishwasher thats a quiet partner 2. the cancel drain light keeps blinking and nothing else is happening. i try to unlock it and then the normal light starts blinking also and still nothing happens. i called a local repair shop and they said i need to change the control board so i did and its still does the same thing. can you give me an idea of where i need to start to fix my problem?


Can you here the pump running or check to make sure there is no water in the base... ... Dishwashers

My Frigidaire Dishwasher PLD4375RFC is showing 3 blinking lights at the same time when I flipped the power at the circuit breaker off-on: High Temp Wash, Air Dry on the touch pad and PF on the display. It would not respond to anything that I tried. All blinking lights are off and machine does nothing when I open and close the door. Flipped the circuit breaker off-on again to repeat the sequence. I replaced the controller board, as recommended by the appliance guy since he checked and said ele


... Frigidaire PLD4375RFC Dishwasher

Kenmore model 665.16049400 clean sensor blinking machine will not reset to start new load of dishes.have tried the cancel button. if i choose a cylce and hit start it just sits there with the clean sensor light blinking


... Kenmore Dishwashers

Cant figure out how to start the wash cycle. There is no knob or anything to lock it, and when i try setting it to start it wont. I live in an apartment and i believe it is an old dishwasher.


Make sure there is solid "click" when you close the door. It may be that the latch is out of adjustment, missing a piece, bent..There should be a door latch release on the front panel. The door latch is also where the safety switch is located ... Whirlpool GU2400XTP Built-in Dishwasher

We have a 12 year old kitchen aid diswasher model kudpo1ilbs2. It is not cleaning the dishes. Everything is loaded correctly and the proper cycle and soap is being used. We have had no problems until the last 2 - 3 months when a greasy food film is now appearing on the dishes. Some food is left on but not a great deal. The question is what could be wrong and what kind of cost are we talking? We are trying to make an informed decision as to whether fix or buy new. Thank you in advance


... Dishwashers

DU943PWKSO DISHWASHER STOPPED WORKING, ELECTRICAL CURRENT TO PANEL...THE LOCK LIGHT COMES ON WHEN THE DOOR IS CLOSED AND LATCHED, BUT THE WASHER WON'T START WHEN ANY OF THE BUTTONS ARE PUSHED...THE LOCKED LIGHT JUST BLINKS A FEW TIMES AND THEN STAYS SOLID AGAIN. ANYTHING I CAN TRY?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. This issue can be either due to a faulty door latch or\015\012door lock switch which is not engaging its ... Whirlpool DU943PWK - Multiple Color Built-in Dishwasher

Hello, My Frigidaire dishwasher model number FDB1250REC2 is not starting the wash cycle, instead, the washing light starts blinking continuously when I press start. I turned off the breaker to the dishwasher and tried to start a load again, same problem! I would really appreciate any help that you can give. Thanks so much!


... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

Buttons stuck cant do anything with my disherwasher controls. Only thing is the clean button and heated dry are blinking


Try pressing the Drain/Off button. If that doesn't work, try performing an automatic sequence test which can help indicate where the problem is. Instructions could be found in a plastic bag attached to the inside of the kick panel which is located be ... Maytag 24 in. MDB9150A Built-in Dishwasher

Ge nautilus beeping blinking light over normal button. When push start/reset, stops for a minute but then begins again. Tried shutting power off for 30 seconds but still no fix. Any suggestions? Thanks!


... GE Nautilus 24" Built-in Dishwasher

My soak/scour light is blinking and cant get my dishwasher to work. Any solutions would be greatly appreciated on how to fix the problem


Generally any time a button continuously flashes, you either have a bad door switch that doesnt recognize door closing, therefore will not start, or the electronic keyboard/touch pad is shorted out, in which case youll ... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

Door problem Hi, I'm not sure of the model number but our Miele dishwasher has a very tight springback action on the door. This must be adjustable but I cant work out how! It is very tricky trying to load and unload when the door wants to spring closed all the time! Thank you, Sue


On my machine there is a torx screw at the top left hand side. You need to open the door to see the screw which sits behind the off-white flange (look for a hole in the flange). ... Miele Premier-Plus Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1061 seconds